Hire the best freelance RC CAD expert designers for your company

I am a Registered Civil/Structural Engineer with 12+ years of experience. AREA OF EXPERTISE 1. 3D Modelling using Revit Structure 2. Structural Design and Analysis 3. Steel & Reinforced Concrete Det... Read more

I am a Registered Civil/Structural Engineer with 12+ years of experience. AREA OF EXPERTISE 1. 3D Modelling using Revit Structure 2. Structural Design and Analysis 3. Steel & Reinforced Concrete Detailing. 4. Technical Reporting For me, the job is marked as completed when you are satisfied.

Structural 2D detailing/drafting (RCC & precast), 3D modeling/ detailing, Photorealistic architectural rendering,etc.

Structural 2D detailing/drafting (RCC & precast), 3D modeling/ detailing, Photorealistic architectural rendering,etc.

Structural / Civil Engineer specializing in reinforced-concrete and steel structures, structural calculations, CAD drawings and strengthening of existing buildings. I prepare buildable structural dra... Read more

Structural / Civil Engineer specializing in reinforced-concrete and steel structures, structural calculations, CAD drawings and strengthening of existing buildings. I prepare buildable structural drawings and calculation packages for industrial, commercial and public projects. My work covers foundations, pile caps, beams, slabs, columns, load-bearing walls, wall openings, lintels, reinforced-concrete strengthening, steel beams, roof trusses, connection nodes, anchors and construction details. Typical deliverables include AutoCAD/PDF structural drawings, calculation notes, load combinations, ULS/SLS checks, internal-force diagrams, member sizing, reinforcement layouts, rebar schedules, steel connection details, material quantities, technical review of existing models and practical strengthening options. I have 17+ years of practical experience in structural design, site supervision and project coordination for aluminium plants, cement plants, hydropower infrastructure, retail buildings, warehouse conversions and reconstruction projects. I worked as a structural designer, construction supervision engineer, head of design department, founder/technical director of an engineering company, and chief project engineer for a 240,000 m2 retail complex. My civil engineering diploma is officially recognized by ENIC-NARIC France at EQF Level 7. I can work with Eurocodes / NF EN, BS EN and UK National Annexes, IBC / ASCE 7 / ACI 318 / AISC 360, NBCC / CSA, AS/NZS and SP/SNiP after agreeing the exact edition, loads, materials and local requirements. I can help with: - Structural analysis and verification of beams, slabs, columns and foundations - Reinforced-concrete design and rebar detailing - Steel structure design, trusses, beams and connection details - Existing building assessment, reconstruction and strengthening - Load-bearing wall openings and replacement beam solutions - Conversion of sketches, PDFs and survey data into clean structural CAD drawings - Independent checking of structural drawings, calculations and design assumptions Local professional stamping, permit approval and site inspection are not included unless separately agreed with a licensed local professional in the project country.

I have over five years of hands-on experience in the construction industry, coupled with a proven track record of leadership and expertise in precast detailing, rebar detailing, steel detailing, proje... Read more

I have over five years of hands-on experience in the construction industry, coupled with a proven track record of leadership and expertise in precast detailing, rebar detailing, steel detailing, project management and quantity surveying. During my tenure at Elluc Projects Philippines, Inc. as a Team Leader for Precast Detailing, I honed my skills in team management, project scheduling, and meticulous attention to detail in precast detailing, rebar detailing and steel detailing. My responsibilities included ensuring the accuracy and integrity of drawings, collaborating with clients to meet their specifications, and effectively leading a team towards project success. Prior to this role, I served as a Quantity Surveyor and BIM Modeler at Monocrete Construction Philippines, Inc., where I developed expertise in bid planning, Modelling of Concrete, Steel and Rebar through Tekla Structures and quantity take-offs. Moreover, my previous role as a Project-in-Charge at Cutting Edge Materials Processing Corporation equipped me with valuable experience in supervision, risk management, and quality control, particularly in architectural steel installation projects. Ensuring project integrity, and maintaining a safe and efficient work environment. My ability to seamlessly transition between collaborative teamwork and self-reliant tasks has consistently enabled me to deliver high-quality results within deadlines. I am eager to bring my technical skills, problem-solving abilities, and dedication to excellence to your esteemed team.

I have 12+years experience in the home improvement industry. Product knowledge in cabinetry, plumbing, electrical, building materials, hardware, wall and floor coverings makes me your ideal candidate... Read more

I have 12+years experience in the home improvement industry. Product knowledge in cabinetry, plumbing, electrical, building materials, hardware, wall and floor coverings makes me your ideal candidate using 2020 Design. My education through junior high and high school included mechanical and architectural drafting. While in college coursework included design, architectural drafting, landscape drafting, interior design and consumer and family sciences. My BS is in Consumer and Family Sciences. Courses in CFS included Kitchen, Bath and Utility Design and Lighting. I would love the opportunity to start this adventure with you. I currently have a lease for 2020 Design.

Analytical, results-oriented engineer with experience across structural departments in residential, commercial, healthcare, education, energy, and mining sectors.

Analytical, results-oriented engineer with experience across structural departments in residential, commercial, healthcare, education, energy, and mining sectors.

HNC in civil engineering. Over 15 years experience as a consultant. Specialist in Civil 3D Revit Cads RC Navisworks Tekla Dynamo Python

HNC in civil engineering. Over 15 years experience as a consultant. Specialist in Civil 3D Revit Cads RC Navisworks Tekla Dynamo Python

Professional Radio-Controlled Model Airplane Designer With over 8 years of dedicated experience in the field of radio-controlled model airplane design, I bring a wealth of knowledge and expertise to... Read more

Professional Radio-Controlled Model Airplane Designer With over 8 years of dedicated experience in the field of radio-controlled model airplane design, I bring a wealth of knowledge and expertise to every project. My specialization lies in 3D design, where I meticulously craft model airplanes with precision and passion. Skills and Expertise: Radio-Controlled Model Design: Extensive experience in designing a wide range of radio-controlled model airplanes, from beginner-friendly models to advanced aerobatic aircraft. 3D Design: Proficient in using industry-standard software such as SolidWorks, AutoCAD, and Blender to create highly detailed and accurate 3D models. Aerodynamics: Deep understanding of aerodynamic principles to optimize the performance and stability of model airplanes. Prototyping: killed in rapid prototyping techniques to quickly iterate and refine designs, ensuring the highest quality end product. Materials Selection: Knowledgeable in selecting the most suitable materials for construction, balancing durability, weight, and performance requirements. Remote Control Systems Integration: Experience in integrating and fine-tuning remote control systems for seamless operation of model airplanes. Approach: My design process is driven by a combination of creativity, technical expertise, and a genuine passion for model aviation. I collaborate closely with clients to understand their specific requirements and preferences, ensuring that each design meets their expectations and exceeds industry standards, except military purposes. Portfolio Highlights: For inquiries regarding access to my previous projects, including detailed portfolios and examples of my work, please feel free to reach out. I am happy to provide further information and discuss how my expertise can align with your project needs. Please contact me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ to initiate a conversation about viewing my past projects and exploring potential collaboration opportunities. Client Satisfaction: Throughout my career, I have built a reputation for delivering exceptional results and providing top-notch client satisfaction. I am committed to delivering projects on time, within budget, and to the highest quality standards. Let's Collaborate: Whether you're a hobbyist looking for a custom-designed model airplane or a company seeking professional design services, I am here to bring your vision to life. Let's collaborate and create something truly extraordinary together.

I am a specialized Structural Designer focused on the analysis and design of reinforced concrete infrastructures. I provide reliable, code-compliant, and constructible solutions for bridges, buildings... Read more

I am a specialized Structural Designer focused on the analysis and design of reinforced concrete infrastructures. I provide reliable, code-compliant, and constructible solutions for bridges, buildings, and complex foundation systems. My approach combines rigorous structural analysis with practical engineering logic to ensure structural integrity while optimizing material usage. Core Areas of Expertise: 1. Bridge Design: Design of reinforced concrete bridges (Slab, T-Beam, Box Girder). Analysis of moving loads and traffic interactions. Compliance with AASHTO standards for highway and pedestrian bridges. 2. Reinforced Concrete Buildings: Design of gravity and lateral load resisting systems (Shear walls, Moment frames). Seismic analysis and detailing for ductility. 3. Foundation Engineering: Design of shallow foundations (Spread footings, Combined footings). Deep foundations and pile caps for high-load scenarios. Mat foundations and soil-structure interaction analysis. Technical Toolkit: Analysis Software: SAP2000, CSI Bridge, ETABS, MIDAS Civil. Codes: ACI (American Concrete Institute), AASHTO, AISC. Whether you need a complete structural design for a building or a specific calculation for a bridge component, I deliver precise engineering backed by solid analysis.

CAD outsourcing is growing faster than ever, for one reason. Firms are realising it is more efficient to outsource CAD Services. If you need a single drawing, a whole package then contact GW CAD Servi... Read more

CAD outsourcing is growing faster than ever, for one reason. Firms are realising it is more efficient to outsource CAD Services. If you need a single drawing, a whole package then contact GW CAD Services. We are a team of technicians from London, UK with HS2, Network Rail and Transport for London experience. passionate about CAD & Designing. Based on our knowledge in Rail/Infrastructure, Tunnelling and Geotechnics, we are offering a range of services such as Drawing production, General Arrangements, Sections/Elevations, 2D/3D Models, Plans & Profiles, Steelwork Detailing, RC Detailing and Location/Site Plans.

Civil/Structural Engineer with six years of experience in AutoCAD-based technical drafting, reinforced concrete design, structural detailing, and engineering documentation. Founder of MHA Proje Mühend... Read more

Civil/Structural Engineer with six years of experience in AutoCAD-based technical drafting, reinforced concrete design, structural detailing, and engineering documentation. Founder of MHA Proje Mühendislik, delivering structural engineering and drafting services for residential, commercial, industrial, and existing-building projects in Türkiye and abroad

I am 17 years of experience in the drafting. I am skilled at following tools MicroStation - 2D & 3D Revit Structure AutoCAD - 2D & 3D CADS - RC - Rebar Scheduling Barbending Sceduling

I am 17 years of experience in the drafting. I am skilled at following tools MicroStation - 2D & 3D Revit Structure AutoCAD - 2D & 3D CADS - RC - Rebar Scheduling Barbending Sceduling

I am a Structural Engineering Technician with 11 years’ experience working in a busy engineering consultancy office. I achieved my qualifications by studying part time while working full time hours to... Read more

I am a Structural Engineering Technician with 11 years’ experience working in a busy engineering consultancy office. I achieved my qualifications by studying part time while working full time hours to completing Level 7 BEng Tech in Civil Engineering and more recently a Level 8 HDip. in BIM (Building Information Modelling) for Civil Engineering. I have worked on a range of projects which include traditional and rapid build schools (steel frame/masonry/precast concrete), residential housing and apartment developments, hospital MRI room extensions, building refurbishments. I have been responsible for providing structural general arrangement and detail drawings, detailing of rebar drawing packs & providing bent bar schedules and weights and attending site for routine inspections. • AutoCAD • Revit Structures • Rebar Detailing with the CADS RC package • Autodesk Vehicle Tracking • Good knowledge of structural aspects of buildings • Microsoft Word & Excel

I am a Structural Design Engineer based in London, U.K. I have over 4yrs experience in the industry, mainly working on residential projects in central London. I have worked for 3 of the top Structura... Read more

I am a Structural Design Engineer based in London, U.K. I have over 4yrs experience in the industry, mainly working on residential projects in central London. I have worked for 3 of the top Structural Engineering firms in the city on projects of various sizes. I have strong structural design capabilities in steel, concrete, timber and masonry and also have excellent project management skills and interpersonal skills. Services: - Structural sketches - Structural CAD drawings - Outline structural designs - Final detailed structural designs

Mechanical Engineering student (NIT Durgapur) with hands-on CAD experience across precision engineering and creative product design. I work in Fusion 360 and SolidWorks to build accurate, manufacturin... Read more

Mechanical Engineering student (NIT Durgapur) with hands-on CAD experience across precision engineering and creative product design. I work in Fusion 360 and SolidWorks to build accurate, manufacturing-ready 3D models — from detailed mechanical parts to product-specific designs with custom textures and material call-outs. My background includes internships in defense electronics manufacturing (Bharat Electronics Ltd.) and naval shipbuilding (Mazagon Dock Shipbuilders), so I understand both engineering precision and real-world manufacturing constraints — not just how something looks, but how it gets made. Recent client work includes a parametric TPU component design built to exact tolerance specs, and a fully detailed RC tire model (Bridgestone Desert Dueler) with accurate tread geometry. I also do photorealistic KeyShot rendering if you need your model to look client-ready, not just CAD-ready. I take feedback seriously and iterate fast — happy to do revisions until the model matches your exact intent, not just your initial brief.

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and... Read more

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and 6 axles vehicle. -Already available analytical approaches were studied: Elastic Curve Equation, Three-Moment Equation, and Beams on Elastic Foundation. - Experimental Rig setup was devised and results were compared with the computational methodology. - A research paper of this study was published in IBCAST-2016 Conference. b. FEA Study of Crane Out trigger Mat -Developed a finite element analysis procedure for simulation of stiffness behavior of foundations under large-scale loads. -The study was required for criteria building of ATPs for safe handling of the crane and its outriggers. -It was also published in the International Conference on Structural Dynamics & Vibrations (ICSDV-2014). c. Mathematical Modeling of 8 Axle Vehicle Steering - Mathematical modeling in MATLAB/SIMULINK for an eight- axle steering system to simulate the behavior while turning for 6DOF Steward Platform Motion Simulator. Mechanical Design Projects a. Landing Gear of a Light Aviation Grade RC Plane (Ongoing Project) - Mathematical modeling of landing gear placement and finalization of its configuration. - Mechanical component design of the nose and main landing gear deploying mechanisms with locking and unlocking arrangements at deployed and retracted positions as per QMS of AS-9100C. - Closing/Opening of landing gear stowage bay door with the same EMA of the nose landing gear. b. Mechanical Design - Modeling and designing of various mechanical structures/mechanisms using CAD modeling software. - Preliminary and detailed engineering calculations at the conceptual and detailed engineering phase of the project. -Validation of modeled systems through the aid of FEA tools (ANSYS/ABAQUS). -Taking projects through the Phases of Product Development Cycle (PDC) as per QMS of ISO or AS- 9100C.

Senior Civil Engineer and BIM Specialist with over 10 years of professional experience, specializing in the design and modeling of Reinforced Concrete (RC) buildings. I bridge the gap between traditio... Read more

Senior Civil Engineer and BIM Specialist with over 10 years of professional experience, specializing in the design and modeling of Reinforced Concrete (RC) buildings. I bridge the gap between traditional structural engineering and modern BIM workflows to deliver precision-driven results. Expertise: Structural Analysis, RC Building Design, BIM Coordination, and Technical Drafting. Software Mastery: Expert-level proficiency in Autodesk Revit and AutoCAD. Technical Focus: High-accuracy 3D modeling, clash detection, and detailed construction documentation. Senior BIM Lead: 3+ years leading BIM execution for complex RC residential and commercial structures. Structural Optimization: Successfully managed large-scale building projects, ensuring 100% compliance with structural codes and BIM standards. Efficiency: Streamlined design-to-construction workflows, reducing site errors through detailed Revit modeling.

I am a CAD and aerospace design specialist with a strong focus on drone design, aerodynamics, 3D modeling, and engineering-oriented CAD work. I can help with the complete development of drone and UAV... Read more

I am a CAD and aerospace design specialist with a strong focus on drone design, aerodynamics, 3D modeling, and engineering-oriented CAD work. I can help with the complete development of drone and UAV components, from initial concepts and 3D CAD modeling to aerodynamic considerations and manufacturing-ready designs. I also have experience working with STL and mesh files, preparing models for 3D printing, modifying existing designs, and creating accurate parts for prototyping. My services include: • Drone and UAV 3D design • Aerodynamic modeling and optimization • CAD modeling and mechanical components • STL editing, splitting, and repair • 3D-printing-ready model preparation • Design modifications and reverse engineering • Assembly and fitment considerations • Prototyping and manufacturing support I focus on accuracy, clean geometry, practical manufacturability, and maintaining the original design intent. Whether you need a new drone component designed from scratch or an existing 3D model modified and prepared for manufacturing or 3D printing, I aim to deliver precise and reliable results.

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flash... Read more

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flashlight enclosure. I have also designed in sculptress but you probably don't want to hire me for that. If you want to 3D print what I designed (or others) just go to my website. I am soon going to work on designing a 3D printer and am thinking about a organic car design-and getting it printed full scale. I also have a provisional patent for a self closing watch band.

Hi, Thank you for considering me for your project! I am a Mechanical CAD Designer with experience designing multiple RC aircraft as well as functional mechanical parts for real-world use. I create ac... Read more

Hi, Thank you for considering me for your project! I am a Mechanical CAD Designer with experience designing multiple RC aircraft as well as functional mechanical parts for real-world use. I create accurate 3D models, technical drawings, and print-ready STL files using Onshape. My hands-on experience with 3D printing gives me a strong understanding of tolerances, fitment, and manufacturability. I also use Blender to create high-quality renders and animations of my designs. I can apply materials and colors, set up lighting, and produce realistic visualizations to help showcase your product or concept. I look forward to helping bring your ideas to life! Nate