Hire the best Piping Isometric Drawing experts for your company

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential bu... Read more

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential buildings, C-Store, Fuel System, frames, plumbing -piping, fixtures, etc. I can work on plumbing and Fire protection drawings and MEP coordination. Aware of Plumbing design codes like IPC UPC, have used NFPA. I can do COMcheck, HVAC load calculations, plumbing pipe sizing, grease interceptor calculations, and permit plans.

I am a Professional Piping Stress Engineer with strong experience in Static & Dynamic Stress Analysis and Piping Design for critical process piping systems. I have worked on Heat Exchanger, Reactor, C... Read more

I am a Professional Piping Stress Engineer with strong experience in Static & Dynamic Stress Analysis and Piping Design for critical process piping systems. I have worked on Heat Exchanger, Reactor, Column, Pump, and other critical equipment connected lines where thermal flexibility, support optimization, and nozzle load control are highly important. I perform detailed stress analysis using CAESAR II, including sustained load, thermal expansion, occasional load, and dynamic analysis. I also provide detailed stress reports, support recommendations, and practical engineering solutions to ensure safe, reliable, and code-compliant piping systems. In addition, I work on piping design, routing, and drafting using AutoCAD and AutoCAD Plant 3D. ✔ Piping Stress Analysis ✔ Static & Dynamic Stress Analysis ✔ Detailed Stress Reports & Recommendations ✔ Critical Equipment Connected Lines ✔ Nozzle Load & Support Evaluation ✔ Hanger Support Design ✔ Piping Design & Drafting ✔ CAESAR II / AutoCAD / Plant 3D Expertise

Process piping engineer with 15+ years of work experience in Oil&Gass, Chemical Industry. · Capable for handling complete basic and detailed engineering piping activities, ensure the management and ex... Read more

Process piping engineer with 15+ years of work experience in Oil&Gass, Chemical Industry. · Capable for handling complete basic and detailed engineering piping activities, ensure the management and execution of engineering work in accordance with the agreed budget and schedule. Experienced in Oil&Gas, chemical, biochemical market. · Piping Layout, Equipment Layout, Piping Isometric dwg, 3D Design Material Take Off, Bill of Quantities. · Proficient in use of AVEA E3D, AVEVA PDMS, AutoCAD Plant 3D, Navisworks

Over 12 Years of experience producing working drawings in the field of Civil, Electrical, Piping, Instrumentation & Telecom. Over 9 years of experience with Autocad & Microstation. A team player and T... Read more

Over 12 Years of experience producing working drawings in the field of Civil, Electrical, Piping, Instrumentation & Telecom. Over 9 years of experience with Autocad & Microstation. A team player and Team Leader working with engineers and co-workers to accomplish the tasks. Highly skilled with the ability to plan ahead and complete the projects in the most efficient way. Skilled in AutoLisp Programming. Knowledgeable in the usage and programming of Microsoft Office Suite programs.

Choose RSSP ENGINEERING SOLUTIONS as your trusted partner for all your engineering design and drawing needs. With our expertise by your side, you can drive successful project outcomes while saving tim... Read more

Choose RSSP ENGINEERING SOLUTIONS as your trusted partner for all your engineering design and drawing needs. With our expertise by your side, you can drive successful project outcomes while saving time and resources. At RSSP ENGINEERING SOLUTIONS, we specialize in providing comprehensive engineering design and drawing solutions for mechanical, civil, and electrical projects. With years of experience in the industry, our firm is dedicated to delivering high-quality services that meet the unique needs of our clients. With a focus on precision and attention to detail, we utilize advanced software tools to create accurate 2D and 3D drawings that facilitate seamless project execution. Our commitment to excellence extends throughout every stage of the design process – from conceptualization to finalization.

My name is Momin Abdullah , and I am a passionate and detail-oriented CAD Engineer with over three years of professional experience in autocad (2D, 3D,Piping Isometric Drawings, SolidWorks, and Sketc... Read more

My name is Momin Abdullah , and I am a passionate and detail-oriented CAD Engineer with over three years of professional experience in autocad (2D, 3D,Piping Isometric Drawings, SolidWorks, and SketchUp. I specialize in mechanical design, Plant Piping P&ID Drawings , and solar panel installation design for residential, commercial, and industrial applications. My journey as a design professional is built on precision, continuous learning, and a deep commitment to translating ideas into accurate, build-ready technical drawings. Since the beginning of my engineering career, I have been fascinated by the power of design to connect imagination and practicality. Each project I complete — whether a piping isometric, an equipment layout, or a solar installation — strengthens my belief that good design is not just about lines and dimensions; it’s about enabling progress, safety, and efficiency in the real world. --- Professional Philosophy I believe engineering design is both an art and a science. It demands creativity, attention to detail, and an understanding of functionality and cost-effectiveness. My work is guided by a simple principle: to deliver designs that are not only accurate but purposeful. I approach every project with curiosity, precision, and a focus on understanding the client’s goals. Over the years, I’ve realized that a great drawing doesn’t just show information — it communicates it clearly. Whether it’s a fabrication drawing, an assembly layout, or a solar panel arrangement, clarity and accuracy are always my top priorities. My role as a CAD Engineer is to bridge the gap between concept and construction, ensuring that each drawing adds real value to the project.

Piping Design Engineer with 18+ years of experience in oil & gas, chemical, and industrial projects. Proficient in SmartPlant 3D, PDS, and 2D/3D modeling across all project phases — from concept to co... Read more

Piping Design Engineer with 18+ years of experience in oil & gas, chemical, and industrial projects. Proficient in SmartPlant 3D, PDS, and 2D/3D modeling across all project phases — from concept to commissioning. Skilled in generating and checking piping isometrics, material take-offs (MTO), and 2D piping layouts. Contributed to major international projects including Boysun Gas Plant, Samarkand Fertilizer Plant (both Uzbekistan), Kharyaga Refinery (Russia), Alcor Hydrogen Unit (Netherlands), Umm Shaif Offshore (UAE), Revithoussa LNG terminal (Greece), Metinvest Air Separation Unit (Ukraine), etc. Strong focus on technical quality, code compliance, and coordination with multidisciplinary teams.

Pressure vessel design per ASME codes, Piping Design, piping Isometrics, Pressure vessel Drawing,3D&2D Design for Skid, Bill of material

Pressure vessel design per ASME codes, Piping Design, piping Isometrics, Pressure vessel Drawing,3D&2D Design for Skid, Bill of material

Piping Engineer with 10 years of experience in Offshore and Onshore Oil and gas projects. With experience in Stress Analysis and 3D Design

Piping Engineer with 10 years of experience in Offshore and Onshore Oil and gas projects. With experience in Stress Analysis and 3D Design

1)3D modeling with solid works. 2) 2D drawing in auto cad. 3) Plant layout in 3D. 4) piping isometric drawing. 5) piping stress analysis.

1)3D modeling with solid works. 2) 2D drawing in auto cad. 3) Plant layout in 3D. 4) piping isometric drawing. 5) piping stress analysis.

I am a Mechanical CAD Draftsman with experience in 2D drafting, piping layouts, P&ID creation, piping isometric drawings, plant layouts, and fabrication drawings. I have experience working on industr... Read more

I am a Mechanical CAD Draftsman with experience in 2D drafting, piping layouts, P&ID creation, piping isometric drawings, plant layouts, and fabrication drawings. I have experience working on industrial projects, including process piping and plant layouts. I focus on creating accurate, clear, and practical drawings according to project requirements. My services include: • 2D CAD Drafting • Mechanical & Fabrication Drawings • Piping Layouts • Piping Isometric Drawings • P&ID Drafting • Plant Layouts • Equipment Layouts • BOM Preparation • Drawing Revisions I am detail-oriented and committed to delivering accurate drawings within the agreed requirements and timeline.

Success-driven and detail-oriented Mechanical Engineer with hands-on experience supporting complex oil and gas documentation in a remote, corporate environment. Background includes reviewing and updat... Read more

Success-driven and detail-oriented Mechanical Engineer with hands-on experience supporting complex oil and gas documentation in a remote, corporate environment. Background includes reviewing and updating piping isometric drawings using AutoCAD, validating design accuracy against P&IDs, and ensuring drawings meet strict quality and drafting standards. Regularly involved in identifying inconsistencies, coordinating clarifications with engineering teams, and maintaining reliable as-built documentation. Known for a methodical approach, strong attention to detail, and the ability to work efficiently with multidisciplinary teams while meeting quality and schedule expectations.

I am a Mechanical Design Engineer with experience in mechanical drafting, SolidWorks 3D modeling, AutoCAD, manufacturing drawings, BOM preparation, and engineering documentation. In my current role, I... Read more

I am a Mechanical Design Engineer with experience in mechanical drafting, SolidWorks 3D modeling, AutoCAD, manufacturing drawings, BOM preparation, and engineering documentation. In my current role, I prepare and modify piping isometric drawings for the oil & gas industry, which has strengthened my attention to detail and revision control. My core interest is product design and manufacturing, and I'm looking for an opportunity where I can contribute to complete product development, from concept and CAD modeling to manufacturing documentation and engineering support

Highly creative and upbeat Piping Engineer with 3 years experience in EPC (Engineering Procurement Construction ) companies specialized in oil and gas industries, producing 3D Plant Model and drawing... Read more

Highly creative and upbeat Piping Engineer with 3 years experience in EPC (Engineering Procurement Construction ) companies specialized in oil and gas industries, producing 3D Plant Model and drawing using P&ID's, and providing Stress Analysis according to project specifications. skils: • Preparing 3D models and 2D drawings using CADWorx Plant. • Revieving 3D models using Autodesk Navisworks Review software. • Developing piping isometric drawings. • Producing vessel drawigns using CADWorx Equipment, AutoCad. • Checking piping isometrics per P&ID and specifications. • Creating piping specifications-database using CadWorx specification editor. • Pipe stress analysis using software Caesar II. • Preparing the Stress Critical Line list.

I am a professional Mechanical Engineering Drafter and 3D Modeler with over 4.5 years of experience in heavy industry and manufacturing sectors. I specialize in transforming engineering concepts into... Read more

I am a professional Mechanical Engineering Drafter and 3D Modeler with over 4.5 years of experience in heavy industry and manufacturing sectors. I specialize in transforming engineering concepts into high-precision technical documentation and manufacturing-ready layouts. My core expertise includes: - 2D & 3D CAD Drafting (AutoCAD, SolidWorks, Autodesk Inventor) - Industrial Piping Layouts & Piping Isometric Drawings - Fabrication, Assembly Drawings & Sheet Metal Detailer - High-accuracy Bill of Materials (BOM/BOQ) preparation I have a strong background in strict document control and version tracking. I am highly committed to maintaining clear communication and delivering precise, error-free work tailored to international standards. Ready to collaborate on your engineering projects!

Piping engineering for the front-end, conceptual, detailed engineering design and stress analysis of piping of various projects as large as a complete gas-oil processing plant. Supervision in the prep... Read more

Piping engineering for the front-end, conceptual, detailed engineering design and stress analysis of piping of various projects as large as a complete gas-oil processing plant. Supervision in the preparation of piping layouts and piping isometric drawings. Interconnecting piping between different units of oil, gas & petrochemical industry. Material estimation of piping systems for design proposals. Man-hours estimation of detailed engineering packages. Fast-paced working, result-oriented and motivated professional. Ability to work in a team to execute the project as per local and international standards, project quality, health and safety requirements and the schedule.

I am a professional Mechanical Draftsman with 19 years of hands-on experience specializing in industrial piping layouts, equipment general arrangements (GA), isometric drawings (with BOM), and structu... Read more

I am a professional Mechanical Draftsman with 19 years of hands-on experience specializing in industrial piping layouts, equipment general arrangements (GA), isometric drawings (with BOM), and structural steel detailing. Having worked extensively in the fertilizer and heavy chemical industries since 2007, I specialize in producing highly accurate fabrication and construction-ready drawings. I am proficient in AutoCAD, Plant3D, and Cadworx to deliver high-quality, precise engineering solutions. Areas of Expertise: - Piping Isometric Drawings & Bill of Materials (BOM) - Equipment General Arrangement (GA) & Piping Layouts - P&ID to 3D/2D CAD Conversion - Steel Support Structures, Platforms, & Ladders

I provide Professional Piping Drafting And Technical Documentation Services For Oil & Gas , Industrial , And Construction Project. My Services Include Piping Isometric Drawings, Weld & Joint Mapping ,... Read more

I provide Professional Piping Drafting And Technical Documentation Services For Oil & Gas , Industrial , And Construction Project. My Services Include Piping Isometric Drawings, Weld & Joint Mapping , Joint/Weld History ,As-Built Drawings, Piping Documentation , MTO/BOM Preparation , Quantity Take-Off , Progress Measurement , and Excel-Based Piping reports. I Can Work With Engineering and Construction Drawings, extract piping and joint information , organize technical data, and prepare and structured deliverables using AutoCAD and Excel. My main areas of service include : Piping Isometric drafting Weld & Joint Numbering /Mapping Joint & Weld History As-Built drawing and redline updates Piping MTO/BOM QTY Take-Off And progress measurement piping construction Documentation excel reports and technical data management AutoCAD 2D piping Drawings I Focus on accurate Drawings, organized technical documentation, and clear deliverables that can be used for construction , progress tracking , and project documentation.

• Plant Engineering: Process Plant Equipment and Piping Layout • Equipment: Nozzle orientation marks up on Mechanical Equipment drawings • Structure: Structural modeling for Process units and Pipe rac... Read more

• Plant Engineering: Process Plant Equipment and Piping Layout • Equipment: Nozzle orientation marks up on Mechanical Equipment drawings • Structure: Structural modeling for Process units and Pipe racks • Skids: 3D Modeling and Optimizing Skid drawings. • Support: 3D Modeling of Piping support layout and drawings • Isometric Drawing: Extracting and Checking of Piping Isometric drawings • Bill of Quantity: Extracting and Checking of Piping Bill of Quantity • Piping Review: Reviewing and preparing review document for piping drawing • Cods and Standard: ASME, DIN, SMS, ISO and IS standard • Review: Review of several plant engineering deliverables as per project requirement. • Software: PDMS, AutoCAD Mechanical, AutoCAD Plant 3D, AutoCAD Navis Work Manage, Bentley Microstation, Bentley Triforma, Bentley Structure, Bentley Plant Space Design Series and Bentley ProjectWise, AutoDesk Vault • Operating System: Windows 10/7/XP

I am a Piping Design and Drafting Professional with a Post Graduate Diploma in Piping Design & Layout Engineering and 2 years of hands‑on experience in AutoCAD 2D/3D and AutoCAD Plant 3D. I specialize... Read more

I am a Piping Design and Drafting Professional with a Post Graduate Diploma in Piping Design & Layout Engineering and 2 years of hands‑on experience in AutoCAD 2D/3D and AutoCAD Plant 3D. I specialize in piping drawing preparation, 3D modeling, and material take‑off, with strong ability to read and interpret piping isometrics, piping GA drawings, schematics, and layout drawings. I have practical experience working on piping 3D models, generating piping isometric drawings, and extracting Bill of Materials (BOM) / Material Take‑Off (MTO) accurately for engineering and fabrication purposes. My work approach focuses on accuracy, clarity, and compliance with engineering standards. I am comfortable working with PDFs, hand sketches, P&IDs, and redline markups, converting them into clean and professional AutoCAD drawings. I understand the importance of drawing consistency, correct tagging, and quantity accuracy, especially for construction and procurement use. I am reliable, detail‑oriented, and committed to delivering quality work within agreed timelines. I am looking for freelance and remote opportunities where I can support engineering firms, EPC contractors, fabricators, and consultants with piping drafting, modeling, and documentation services.

Mechanical Engineer with 19+ years of experience in mechanical engineering, industrial maintenance, piping, steel structures, fabrication and installation, with extensive experience in the steel and p... Read more

Mechanical Engineer with 19+ years of experience in mechanical engineering, industrial maintenance, piping, steel structures, fabrication and installation, with extensive experience in the steel and process industries. I provide professional 2D and 3D CAD services using AutoCAD and SolidWorks, including: • Mechanical fabrication and assembly drawings • Piping layouts and piping isometric drawings • Steel structure drawings • Equipment and machinery drawings • Tank and vessel drawings • 2D drafting and drawing conversion/redrawing • 3D mechanical modeling in SolidWorks • BOM, Material Take-Off and Material Specifications • Manufacturing and installation drawings • Modification and updating of existing drawings I have around 25 years of experience working with technical drawings and approximately 10 years of experience with steel structures and piping fabrication/installation. My industrial background allows me to understand not only how to draw a component, but also how it will be fabricated, assembled, installed and maintained in a real industrial environment. I have experience working with DIN, ISO, ASME and API standards, depending on project requirements. I focus on accurate drawings, practical engineering solutions, clear documentation and reliable communication.

Hi, I am Ahmad Annasaai Osman professional Design from Malaysia. A well-educated person and highly motivated when comes to work time frame. I have gathered enormous efficiency in various editing tool... Read more

Hi, I am Ahmad Annasaai Osman professional Design from Malaysia. A well-educated person and highly motivated when comes to work time frame. I have gathered enormous efficiency in various editing tools that are helpful in creating any strong design by using; - AutoCAD - AVEVA Marine Outfitting (Piping) - Sketch Up - Adobe illustrator - Photoshop - Canva My working experiences in the various field (Quality Assurance Quality Control, Construction, Production, Engineering, Procurement, Designer) it has helped me to develop a technical skill that mastered in others software such as Microsoft PowerPoint, Microsoft Word, Microsoft Excel, Microsoft Project, Adobe Acrobat). My service included but not limited to; - As-Built Drawings - Approved For Construction Drawing - Piping Isometric Drawing - Graphic Design - Logo - Photo Editing - Data Entry - Virtual Assistant - Copywriting - Ghostwriting - Minute Meeting - Planning and Scheduling When I take any project in my hand, I would like to give it my 100% commitment and try to do my best work to fulfill my client's requirements. I'm still a keen learner who wants to create more new ideas and never hesitate to learn new things. I look forward to hearing your feedback. Please feel free to contact me if you are interested in hiring me. Thank you.

- Over 13years of experience in piping drafting and modeling. - Proficient knowledge in the oil and gas sector, specifically FPSO. - Skilled in preparing piping layouts for detailed engineering. - Cap... Read more

- Over 13years of experience in piping drafting and modeling. - Proficient knowledge in the oil and gas sector, specifically FPSO. - Skilled in preparing piping layouts for detailed engineering. - Capable of creating 3D pipe routing drawings for steam, water, and air piping. - Able to convert piping layouts into fabrication isometric drawings. - Experienced in modeling piping systems on PDMS/E3D, with an understanding of relevant codes and standards. - Proficient in piping modeling according to P&ID studies, including line slopes, instrumentation, valves, and special items in pre-assembled modular and shipping concepts using the E3D tool. - Skilled in equipment modeling based on Equipment GA’s. - Providing supports as per stress requirements and standards for critical and non-critical lines. - Responsible for preparing the required vessel platform and other structural drawings. - Utilizing Navisworks for clash and overlap checking. - Preparing piping layouts in PDMS/E3D. - Ensuring access and maintenance for valves. - Updating model review comments and tag closeouts. - Extracting IFC piping isometric drawings. - Coordinating with other departments.

Professional Summary Piping Designer and Stress Analysis Engineer with over 24 years of experience in piping design and detailed engineering for chemical, petrochemical, oil & gas, and refinery proje... Read more

Professional Summary Piping Designer and Stress Analysis Engineer with over 24 years of experience in piping design and detailed engineering for chemical, petrochemical, oil & gas, and refinery projects. Extensive expertise in developing both 2D and 3D piping models for new installations, as well as performing comprehensive piping stress analysis since 2008. Highly capable of independently handling all activities within the piping discipline, from conceptual design to detailed engineering and stress verification. Core Qualifications Piping Design Development of 3D models and 2D drawings using CadWorx Plant and AutoCAD Plant 3D Review and coordination of 3D models using Autodesk Navisworks Verification of 3D models, orthographic, and isometric drawings Preparation of piping isometric drawings Creation of piping layouts, plans, sections, and detailed drawings Preparation of equipment and vessel drawings using CadWorx Equipment and AutoCAD Validation of piping isometrics against P&IDs and project specifications Piping layout design, 3D modelling, and isometric extraction Development and maintenance of piping specifications databases using CadWorx Spec Editor and AutoCAD Plant 3D Piping Stress Analysis Pipe stress analysis using CAESAR II Vessel nozzle verification using FEA methods (FE NozzlePro) Preparation of Stress Critical Line Lists Development of initial load data for pipe racks and supporting steel structures Nozzle qualification for vessels, drums, and rotating equipment Review of piping isometrics with engineering recommendations Review of project specifications and technical requirements Preparation of piping layouts and detailed drawings aligned with stress requirements Review and validation of third-party and internal stress calculations Flange leakage analysis in accordance with equivalent pressure methods and ASME Section VIII, Division 1

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns.... Read more

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns. Towers, Steel Structure, Mechanical & Civil Drafting. Preparing propose initial conceptual design layouts for various projects. Ability to create detailed construction drawings independently which is included related specifications, and capable of enforcing such specifications. Involve in construction, supervision, inspection and material take-off. Involve with Auto CAD 2D & 3D,Bently open plant 3D-Modeler, Piping plan, piping Isometric Drawings, Sheet Metal Work, Mechanical Drawings, PFD, P&ID, and Civil Layout etc. A keen and dedicated Piping Designer having approx. 10+ years of experience in Oil & Gas, Petrochemical, and Mechanical equipment industries. My Responsibilities Includes: • Preparation and modification of Piping layouts. • Preparation of piping isometrics. • Extraction of isometrics form plan. • Piping of storage tank, vessel, heat exchanger, Pumps and Compressors  equipment layout and general arrangement drawings  Under Ground Piping Drawings  • Preparation and modification of support layout. • Preparation of M.T.O. (Weight Calculation) and B.O.Q. • Sketching to provide information and site conditions.  Preparing Steel Structure drawings for installation, proposed new Platform, Joints detail (Welded & Bolted) Bracing, ladders. • Fabrication detail drawings • Rigging plan views from PDS 3D model. • Site Supervision during Project execution and Turn Around. • Generation of bill of material for Projects. • Preparation and modification of Equipment drawings.  • Support marking as per stress analysis report.  Design the BOX UP for different kind of leakages  • PFD, P&IDs, MSDs.