Hire the best freelance CADWorx Plant expert designers for your company

Have been working the past 13+ years in the gas processing world of global energy. Have worked several international jobs. Main focus is on structural/civil work. Providing detailed structure fabricat... Read more

Have been working the past 13+ years in the gas processing world of global energy. Have worked several international jobs. Main focus is on structural/civil work. Providing detailed structure fabrication drawings and ready to build foundation drawings. Looking to find side work to fill in down times.

I am mechanical/Piping design engineer. I studied Industrial Mechanical Engineering and continued my education with training in the field of engineering for the design of mechanical and hydraulic syst... Read more

I am mechanical/Piping design engineer. I studied Industrial Mechanical Engineering and continued my education with training in the field of engineering for the design of mechanical and hydraulic systems. My Skills: - Mechanical design with Autodesk Inventor. - Structural design with Advance Steel. - Pressure vessel design under ASME SECTION VIII DIV 1 with AUTOPipe Vessel. - Atmospheric storage tank design based on API 650 and API 12F with AMETank. - Design of process piping, cross-country piping, and gas distribution based on ASME B31.3, B31.4, B31.8, and industrial plants with AutoCAD Plant 3D and Pipe Flow Expert. - Flexibility analysis and pipe stress calculation with CESAR II. I am dedicated to the design, modeling, and drawing of mechanical equipment such as flares, skids, shelters, handrails, ladders, storage tanks, KOD, vessels, scrubbers, silos, metal structures, industrial plants, flexibility analysis, and pipe stress loads.

CAD Technician with over 11 years experience, 3D modelling point cloud data for piping, structural and survey data for the completion of BOM's, dimensional control and plans - engineering and isomet... Read more

CAD Technician with over 11 years experience, 3D modelling point cloud data for piping, structural and survey data for the completion of BOM's, dimensional control and plans - engineering and isometric - for both green and brownfield projects. I have also completed topographical & cadastral plans - building change of use, renovation, subdivision, R.P.O. & Old Law - for private and commercial clients to either register or have plans approved by the Director of Surveys or Town & Country Planning Division. Implementing various CAD suites - AutoCAD, Civil 3D, CADWorx and Cyclone.

Professional Summary Piping Designer and Stress Analysis Engineer with over 24 years of experience in piping design and detailed engineering for chemical, petrochemical, oil & gas, and refinery proje... Read more

Professional Summary Piping Designer and Stress Analysis Engineer with over 24 years of experience in piping design and detailed engineering for chemical, petrochemical, oil & gas, and refinery projects. Extensive expertise in developing both 2D and 3D piping models for new installations, as well as performing comprehensive piping stress analysis since 2008. Highly capable of independently handling all activities within the piping discipline, from conceptual design to detailed engineering and stress verification. Core Qualifications Piping Design Development of 3D models and 2D drawings using CadWorx Plant and AutoCAD Plant 3D Review and coordination of 3D models using Autodesk Navisworks Verification of 3D models, orthographic, and isometric drawings Preparation of piping isometric drawings Creation of piping layouts, plans, sections, and detailed drawings Preparation of equipment and vessel drawings using CadWorx Equipment and AutoCAD Validation of piping isometrics against P&IDs and project specifications Piping layout design, 3D modelling, and isometric extraction Development and maintenance of piping specifications databases using CadWorx Spec Editor and AutoCAD Plant 3D Piping Stress Analysis Pipe stress analysis using CAESAR II Vessel nozzle verification using FEA methods (FE NozzlePro) Preparation of Stress Critical Line Lists Development of initial load data for pipe racks and supporting steel structures Nozzle qualification for vessels, drums, and rotating equipment Review of piping isometrics with engineering recommendations Review of project specifications and technical requirements Preparation of piping layouts and detailed drawings aligned with stress requirements Review and validation of third-party and internal stress calculations Flange leakage analysis in accordance with equivalent pressure methods and ASME Section VIII, Division 1

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

✔ Piping Design & Drafting: Isometric drawings, P&IDs, piping layouts ✔ CAD Software: AutoCAD (2D & 3D), CADWorx Plant ✔ Technical Drawings: As-built drawings, fabrication drawings, material take-off... Read more

✔ Piping Design & Drafting: Isometric drawings, P&IDs, piping layouts ✔ CAD Software: AutoCAD (2D & 3D), CADWorx Plant ✔ Technical Drawings: As-built drawings, fabrication drawings, material take-off (MTO) ✔ Oil & Gas Industry Knowledge: Refinery piping, equipment layouts, process plant drafting ✔ Engineering Standards & Compliance: Ensuring accuracy and adherence to safety regulations ✔ Technical Support: Assisting engineers, troubleshooting design issues ✔ Collaboration: Working with multidisciplinary teams, modifying and optimizing designs Deliverables: 📌 Detailed Piping Drawings (Isometrics, P&IDs, General Arrangements) 📌 As-Built Drawings & Design Modifications 📌 Fabrication & Construction Drawings 📌 Material Take-Off (MTO) Reports 📌 Optimized Piping Layouts for Oil & Gas Facilities 📌 CAD Models & 3D Visualizations

I have more than 10 years of experience as a Mechanical designer I am an expert in CAD 2D Drafting and 3D Modeling, Preparation of GA Drawings for process plants, Preparation of 2D, 3D Modeling and 3D... Read more

I have more than 10 years of experience as a Mechanical designer I am an expert in CAD 2D Drafting and 3D Modeling, Preparation of GA Drawings for process plants, Preparation of 2D, 3D Modeling and 3D Animation, Preparation of piping layouts and P&ID, Preparation of engineering drawing related to Rocketry and Space application.

13 years of experience in Multidisciplinary Projects for the Petrochemical, Oil & Gas Industry, mainly in Piping Design Engineering for Process Plants, handlign piping desing tools in 3D PDS, Cadworx... Read more

13 years of experience in Multidisciplinary Projects for the Petrochemical, Oil & Gas Industry, mainly in Piping Design Engineering for Process Plants, handlign piping desing tools in 3D PDS, Cadworx, and 2D software Autocad, Microstation. Excellent handling of the Cadworx plant version 2006 to 2015 for equipment modeling, piping design, and structural. Also handling Isogen software to produce isometric. Other sotfware using is PDS software - Modules: Equipment Modeling, Piping Designer, Isometric Drawing Manager, Drawing Manager (Piping Plans), SmartPlant Review, 3DS Orthogen, Q MicroStation, AutoCAD, MS Office

Design Engineer with several years of experience in design of piping, steel structure and pressure vessels. High level of expertise in piping analysis using AutoPIPE and CAESAR II. FEA expertise usi... Read more

Design Engineer with several years of experience in design of piping, steel structure and pressure vessels. High level of expertise in piping analysis using AutoPIPE and CAESAR II. FEA expertise using Ansys Workbench 3D modeling using Inventor and Solidworks.

Experienced Process Piping Engineer with 14 years of comprehensive experience in onshore plant engineering and offshore topside platform layout through various EPC projects, ranging from upstream... Read more

Experienced Process Piping Engineer with 14 years of comprehensive experience in onshore plant engineering and offshore topside platform layout through various EPC projects, ranging from upstream topside platforms to downstream refineries, petrochemical, gas processing and process chemical facilities. Well-versed in project execution of greenfield as well as brownfield upgrading projects, from Front-End Engineering & Design (FEED) to Detail Engineering stage. Strong experience collaborating with engineers from various disciplines to increase productivity and solve challenges. Highly organized to meet project deadlines and fulfill commitments.

A Professional design engineer can create 3D models and assemblies for conceptual, detailed design or manufacturing processes. I am providing modelling services to generate different types of technic... Read more

A Professional design engineer can create 3D models and assemblies for conceptual, detailed design or manufacturing processes. I am providing modelling services to generate different types of technical drawings as bellow: Layout Detail Drawings Fabrication Drawings Arrangements Structural detailing Bill of Material and purchasing lists

I am Mechanical Engineer, I have eight years of work experience, I've worked in 3D CAD designs projects, specially for the petroleum and petrochemical industry, however, I am not limited to this area.... Read more

I am Mechanical Engineer, I have eight years of work experience, I've worked in 3D CAD designs projects, specially for the petroleum and petrochemical industry, however, I am not limited to this area. If you something to make in 3D CAD software and also you need to do a mechanical analysys I can help you.

Senior Mechanical CAD Designer with over 30 years of experience in oil & gas, industrial, and plant design projects in Saudi Arabia. Specialized in 3D piping modeling using PDMS, CADWorx and AutoPlant... Read more

Senior Mechanical CAD Designer with over 30 years of experience in oil & gas, industrial, and plant design projects in Saudi Arabia. Specialized in 3D piping modeling using PDMS, CADWorx and AutoPlant 3D, with strong expertise in P&ID, isometrics, equipment layout, and detailed fabrication drawings. Experienced in delivering accurate, clash-free models and construction drawings for EPC projects. Known for reliability, fast turnaround, and high-quality drafting standards. Committed to meeting deadlines and supporting engineering teams from concept to as-built.

 From basic floor plans to complex 3D building models, I have the skills and talent to produce what you need.  Over 16 years of CAD experience in the Residential Building, Gas & Oil and gen... Read more

 From basic floor plans to complex 3D building models, I have the skills and talent to produce what you need.  Over 16 years of CAD experience in the Residential Building, Gas & Oil and general 3D modeling sectors.  Engineering Graphics Technology CAD course completed at Red Rocks Community College.  Bachelor of Arts degree from BIOLA University.  President/Owner of Alpine Design currently. www.AlpineDesignDrafting.com  Familiar with: project setups, coordinating XREF models, residential, general construction and piping specifications, naming conventions, as well as ANSI and ASME industry standards.  Willing and motivated to learn new techniques, software and/or industry and/or company standards.  Attention to detail, fast, reliable, honest, hard-working, strong analytical problem-solving.  Great professional people-skills, able to communicate and cooperatively work effectively w/other members of project team, strong verbal and written skills, quick learner, flexible, positive outlook.  Create 3D Residential building models, piping and equipment models.  Produce high-quality and accurate: Site Plans, equipment location plans, plan and section construction drawings, including PFDs and P&IDs, Equipment Schedules of materials.  Piping/Design fabrication of upstream & mid-stream oil & gas.

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direc... Read more

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direct reduction plants, slurry transportation, cryogenic piping, etc.) and oil & gas projects (refineries, oil fields). Developed competences in most important piping codes (including ASME B31.1, ASME B31.3, EN-13480, etc.), and acquired proficiency in all aspects of static and dynamic pipe stress analyses (seismic, PSV transients, water hammer, harmonic vibrations, high-frequency vibrations, etc.) including generating critical line list, preliminary route studies and equipment arrangements, building load cases to satisfy code requirements, support design and analysis and fatigue assessments. In-depth knowledge of piping layout design using 3D software. In addition to pipe stress analysis and piping design, which is the primary field of expertise, during the work at the University of Belgrade (as PhD candidate), developed skills in pressure vessel analysis (ASME VIII-1, ASME VIII-2 and EN-13445), process equipment sizing, process design and optimization, heat and mass transfer calculations, fluid flow calculations (steady state and transient, including interaction with the stress analysis), CFD calculations, programming as well as advanced measurement and research techniques which has all proven extremely valuable in the practice. First author and co-author of several engineering and scientific research papers.

I am providing as individual Engineering Cad, Design & Drafting services include large range 2D & 3D CAD drafting, paper to CAD conversion, raster to vector conversion for engineering drawings (civil,... Read more

I am providing as individual Engineering Cad, Design & Drafting services include large range 2D & 3D CAD drafting, paper to CAD conversion, raster to vector conversion for engineering drawings (civil, structural, mechanical, electrical, piping & instrumentation), architectural and facility drawings (floor plans, section & elevation plans, 3D modeling and rendering), contour maps, ground cadaster plans and Utility distribution networks maps for electric, gas, water, sewage and telecom. CAD Application Available 1. AutoCAD 2d & 3d 2. Revit BIM (Architecture, MEP & Structure) 3. Plant 3d Design (Process Plant Design & Piping) 4. Intergraph Cadworx (Process Plant Design & Piping) 5. Solidworks (Products & Parts Design) 6. 3d Studio Max (Interior Design) Regards Freelance CAD Designer and Draftsman mumairali90 (at) ▒▒▒▒▒▒▒ (dot) com ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ : + 9 2 3 1 5 4 2 9 9 3 8 4 ▒▒▒▒▒▒▒▒▒ : umair.ali400

- Over 13 years of experience in engineering with a strong focus on piping design. - Proficient in tools such as Cadworx, Navisworks, and Microstation for 3D modeling and layout. - Skilled in crea... Read more

- Over 13 years of experience in engineering with a strong focus on piping design. - Proficient in tools such as Cadworx, Navisworks, and Microstation for 3D modeling and layout. - Skilled in creating piping isometrics, plot plans, and line lists. - Expertise in pipe supports and MTO, contributing to efficient project execution.

Design Engineer with over 10 years of experience in detail engineering and design for Oil & Gas, Water Treatment, Chemical, and Industrial projects under EPC & EPCM environments. Strong expertise in p... Read more

Design Engineer with over 10 years of experience in detail engineering and design for Oil & Gas, Water Treatment, Chemical, and Industrial projects under EPC & EPCM environments. Strong expertise in process layout, piping design, equipment modeling, and multidisciplinary coordination. Proven ability to deliver high-quality 2D & 3D design outputs in compliance with international codes, project specifications, and client standards. Responsible for concept, basic, and detailed engineering activities Preparation and review of GA drawings, layouts, piping isometrics, and fabrication drawings Development and maintenance of 3D models using industry-standard software Clash detection, model validation, and design optimization Coordination with process, mechanical, electrical, instrumentation, and civil teams Review of vendor drawings and integration into the overall model Preparation of BOM, MTO, and material take-offs Compliance with ASME, API, ISO, IS, and project-specific standards Supporting construction teams during site execution and as-built updates

I am Tejas, a BIM professional with over 11 years of experience, specializing in delivering high-quality designs with reduced errors and ensuring timely project completion across the UK, UAE, Australi... Read more

I am Tejas, a BIM professional with over 11 years of experience, specializing in delivering high-quality designs with reduced errors and ensuring timely project completion across the UK, UAE, Australia, the US, and India. I excel in managing high-pressure situations by implementing innovative and efficient solutions to meet project deadlines effectively. My expertise spans BIM modeling and coordination, BIM standards and documentation, project management, construction, interior design, stakeholder management, mechanical design, and BIM digital design. As a BIM digital designer, I leverage cutting-edge digital tools and workflows to create and manage detailed 3D models, implement and maintain BIM standards, and ensure seamless coordination between project stakeholders. I focus on enhancing project delivery through advanced visualization, clash detection, and data-rich modeling that supports decision-making throughout the project lifecycle. I am proficient in industry-leading tools, including AutoCAD, Revit, Plant 3D, CADWorx, PDMS, E3D, AECOsim Building Designer, MicroStation, Navisworks Manage, Autodesk Recap, ProjectWise, and BIM 360. I am committed to transforming project visions into reality by delivering results that align with client expectations through precision, collaboration, and innovation.

Competent and reliable drafter for your project. Quick and accurate product definition data for marketing proposals, detailed engineering assessment, or drafting design work.

Competent and reliable drafter for your project. Quick and accurate product definition data for marketing proposals, detailed engineering assessment, or drafting design work.

I am in the process of trying to establish a new freelancing business out of my home office; found this site and thought this might be an awesome way to get a jump start in that venture. I have 5 yea... Read more

I am in the process of trying to establish a new freelancing business out of my home office; found this site and thought this might be an awesome way to get a jump start in that venture. I have 5 years experience in industrial ventilation design, a combined 2 years experience in commercial/residential HVAC design, and 1 year of Process & Mechanical Design.  I am well versed in Autodesk Inventor, AutoCAD Mechanical, CADWorx, SolidWorks, and have also had experience with Pro/Engineer.  I am good at creating 3D animations and renderings. I am also well versed in Inventor ilogic to create easily modified assemblies per design criteria given by client.

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industri... Read more

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industries for over 9 years with design experience of various facilities including: tank batteries, CVR systems, well testing systems, gas plants, water plants, dehydration plants, pump stations, equipment skids and pipe lines to name a few. My responsibilities have included, but have not been limited to, piping design, structural design, onsite as-built verification, 3D Laser Scanning, drawing production, and construction support. I’m proficient in multiple 2D and 3D softwares such as, AutoCAD, AutoCAD Plant 3D, CADWorx, Solidworks, and Aveva’s PDMS.

(12) years experience in piping design and drafting for,chemical ,fertilizer (Crystallization,evaporation and ammunium nitrate unite),Cement works,Oil & Gas and Petrochemical industries,. Conceptual... Read more

(12) years experience in piping design and drafting for,chemical ,fertilizer (Crystallization,evaporation and ammunium nitrate unite),Cement works,Oil & Gas and Petrochemical industries,. Conceptual plant layout from preliminary documents such as PFD’s, geological plans, preliminary vendor data to produce a 3D cadworx based model showing major equipment, structures, modules and main pipe routes and access volumes • Experience with EPC Company in detailed design and drafting. - The production of mechanical and piping drawings associated with turn-key wood fuelled boiler installations, ducting and district heating systems and heat pumps systems including: - 2D Plantroom Layouts & Sections - 2D Pipework & piping Service Layouts - Mechanical & piping Schematics • Piping layout, plot plans, equipment arrangement with piping flexibility. • Perform squad check of vendor equipment drawings and other discipline drawings. •CAD software like AutoPlant V8i (expert), AutoCAD & CADWorx. • Applies design standards and principles in compliance with all applicable Codes and Specifications such as API, ASME, ANSI, etc. my ▒▒▒▒▒▒▒▒▒▒▒▒:▒▒▒▒▒▒▒▒▒▒▒▒

I have over 10 years experience in the design of Oil and Gas industry. There is experience in large project organizations (STG Engineering) . Developing piping drawings, isometric drawings, material t... Read more

I have over 10 years experience in the design of Oil and Gas industry. There is experience in large project organizations (STG Engineering) . Developing piping drawings, isometric drawings, material take-off and stress analysis calculations of pipelines. Work with suppliers of equipment. Supervision of construction sites. Last project was carried out for the company TOTAL (Khatyaga EP-2 ) Professional skills in the work with the programs: AutoCAD, CADWorx Plant 3D, intergraph smart 3D (PDS), AutoPipe, Intergraph CAESAR II - Pipe Stress Analysis, Navisworks

RAMESH JAGANNATH LAKHAPATE Date: 22.12.2012 To, Personnel Manager, Dear Sir / Madam, I am a performance oriented professional with 31 years of exposure in the Water treatment and Petrochemical sectors... Read more

RAMESH JAGANNATH LAKHAPATE Date: 22.12.2012 To, Personnel Manager, Dear Sir / Madam, I am a performance oriented professional with 31 years of exposure in the Water treatment and Petrochemical sectors including 11 years of international exposure. I am a qualified Chartered Engineer (Mechanical Engg) from Institution of Engineers-Calcutta (India). I am CADWorx Plant Professional - 3D Modelling of Equipment & Isometric Generation from ImageGrafix, UAE (2009). I have undergone key professional courses like • The Layout of Piping System & Process Equipment, Howard Technology -Middle East, Abu Dhabi (2008) • Diploma in Welding & Lamination of Thermoplastics & GRP Materials, Hydro-Norway (2005) • Lead Auditor (ISO – 9000), International Register of Certified Auditors, UK (1995) I am skilled in pre-engineering & detail engineering of projects; design, selection, fabrication and installation of pipes & pipe valve supports of GRP & metal piping. I have exposure in conducting 3D modeling of piping design and fabrication; reviewing piping engineering plans & specifications for piping & equipments and conducting on-site inspections of projects. Lead Auditor for implementing and establishing ISO 9001 system procedures. Currently working as Technical Design Engineer with Qatar Vinyl Company Ltd. QSC, Qatar. I am responsible for designing new projects & modifying piping based on production requirements, construction codes and environmental restrictions; conducting 3D modelling of piping design and fabrication and reviewing piping engineering plans & specifications for piping & equipments. Prior to that, associated with Ion Exchange (India) Ltd., Mumbai, worked in several capabilities from Estimation Executive, Design Executive till Manager Design – Engineering Division. I was responsible for managing design activities within the Design Dept. during pre-engineering and detailed engineering of turnkey projects; estimating large turnkey projects; developing process design and estimation software packages. Acted as ISO 9001 system coordinator for implementing and establishing ISO system procedures. With my experience and skills, I am confident of offering significant value addition as a Senior level Management Professional in your esteemed organization. I have enclosed my resume for your perusal. I will appreciate an opportunity for an interview at your convenience. Thank you for your time and consideration. Sincerely, Ramesh Jagannath 

I am a Mechanical Draftsman. I have experience of 15 years as Piping and Mechanical structural Draftsman in a fertilizer industry. I have huge experience of Autocad and Cad works. I have experience of... Read more

I am a Mechanical Draftsman. I have experience of 15 years as Piping and Mechanical structural Draftsman in a fertilizer industry. I have huge experience of Autocad and Cad works. I have experience of drafting of piping plans, piping Isometric, piping supports, civil foundations for supports and equipment's drawings.

I'm a Mechanical Design Engineer for 8 years, Working in OIL & GAS Company, I'm Freelance CAD Outsourcing , I am proficient in 3D and 2D in AutoCAd, Autodesk Inventor, Pro E, Solid Works. and CADWORX... Read more

I'm a Mechanical Design Engineer for 8 years, Working in OIL & GAS Company, I'm Freelance CAD Outsourcing , I am proficient in 3D and 2D in AutoCAd, Autodesk Inventor, Pro E, Solid Works. and CADWORX Convert PDF to DWG, Paper sketch to DWG to 3D and FABRICATION Detailingexposed in different kind of discipline (Structural, Pressure Vessels, Mechanical, Electrical and Plumbing in line of technical practice. Turning mark-ups sketches in to .dwg/.dxf drawings.