Hire the best ANSYS Maxwell experts for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I am Automobile Engineer working as a design engineer in automotive industry mainly in the field of powertrain engineering

I am Automobile Engineer working as a design engineer in automotive industry mainly in the field of powertrain engineering

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conver... Read more

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conversion, battery power, and audio. I have designed, built, and shipped multiple successful, high and low volume products for retail, industrial, and research markets.

Professional Summary Experienced Electrical Engineering Designer with 15 years of expertise in designing electrical systems. Strong proficiency in AutoCAD and EPLAN for schematic design, panel layout,... Read more

Professional Summary Experienced Electrical Engineering Designer with 15 years of expertise in designing electrical systems. Strong proficiency in AutoCAD and EPLAN for schematic design, panel layout, and system documentation. Holds a Master’s degree in Electrical Engineering with a deep understanding of power distribution. Adept at collaborating with cross-functional teams to deliver efficient and compliant designs. Technical Skills Software: AutoCAD, EPLAN Design Expertise: Power distribution, control panel design, schematic drawings, wiring diagrams Industry Standards: IEC, NEC, IEEE, UL, etc. Other Skills: Project management, cost estimation, technical documentation Work Experience: Lead electrical design projects for industrial and commercial applications Create detailed electrical schematics and panel layouts using AutoCAD and EPLAN Ensure compliance with industry standards and safety regulations Collaborate with mechanical and automation teams for seamless integration Conduct design reviews and provide technical support to installation teams Designed electrical systems for more than 200 projects. Developed BOMs, wiring diagrams, and specifications for procurement and installation Assisted in troubleshooting and optimizing existing electrical designs Education Master’s Degree in Electrical Engineering [kashan university ], [2011] Bachelor’s Degree in Electrical Engineering –Hormozga university Languages (if applicable) English (Fluent)

I am a Mechanical Design Engineer with over 15 years experience offering 2D and 3D solutions for all areas of Design and Drafting. Everything from Concept to Photo Realistic Renderings and Manufacturi... Read more

I am a Mechanical Design Engineer with over 15 years experience offering 2D and 3D solutions for all areas of Design and Drafting. Everything from Concept to Photo Realistic Renderings and Manufacturing Drawings. I am 6 Sigma qualified to a Black-Belt level and have experience in Lean Design including FMEA's, Quality Control Procedures and Lean Manufacturing. I have experience in many software packages which include: - Pro-Engineer - Solidworks - Autodesk Inventor - 3d Studio Max - Maxwell Render - AutoCAD - Photoshop I look forward to working with you.

         

         

I have Strong Design and Front-End Concept skills with specialised experience and knowledge of BIM and 3D Art, as well as extensive experience of the building process. I have exceptional skills and ex... Read more

I have Strong Design and Front-End Concept skills with specialised experience and knowledge of BIM and 3D Art, as well as extensive experience of the building process. I have exceptional skills and experience in planning, designing detailing, and coordinating projects both in the public and private sectors on projects within multi-disciplined international practices. developing master-plans and mixed use schemes, residential schemes; offices; and airports.

I started my cad drafting career in telecommunications drafting inside outside plant cable designs for Sprint, Siemens, and Time Warner. I started drafting early during my junior high school years ear... Read more

I started my cad drafting career in telecommunications drafting inside outside plant cable designs for Sprint, Siemens, and Time Warner. I started drafting early during my junior high school years earning awards at the trade fairs. Major clients for campus installs where Bowling Green University, Kent State, placed fiber optic installs in eastern southern and western Ohio. I then started working for architects in central and northern Ohio gaining experience in commercial, health care, and residential, construction. I then freelance mechanical, electrical and architectural drafting services to clients in central Ohio and the east coast of Texas. I also with a team designed automated assembly lines for the tire industry Firestone, BF Goodrich, Goodyear. The tire plants where located in the US Mexico and Canada. I also draft additions, house plans, and renovations for local builders I submitted the plans to codes and permits for approval when tasked to do so. During the 80’s I was an armor tank crewman in the United States Army. I grew up in the construction trades my father was a contractor I also did and still do on occasion contract construction in central Ohio.

2016 Graduate from University of Nairobi, Bachelor of Construction Management

2016 Graduate from University of Nairobi, Bachelor of Construction Management

MS in Aerospace Engineering (Computational Fluid Dynamics) with extensive knowledge of the field and strong technical background. Experienced in solving engineering problems related to propulsion syst... Read more

MS in Aerospace Engineering (Computational Fluid Dynamics) with extensive knowledge of the field and strong technical background. Experienced in solving engineering problems related to propulsion systems (starting from component design to optimization of the system as a whole), Computational Fluid Dynamics (CFD), Structural Design, Analysis(FEA) and Optimization of complex systems, Research and Development (R&D), 3D modeling using a number of software, deep understanding of AeroAcounstics(Turbulence modeling) problems and their analysis based solutions. -Machine Learning software expertise includes: ANSYS modules(ANSYS Fluent, ANSYS CFX, ANSYS Static Structural, ANSYS EXPLICIT DYNAMICS, ANSYS MAXWELL, ANSYS APC, ANSYS MODAL, ANSYS TurboGrid, ICEM), CATIA V5, AutoDesk Inventor, AUTOCAD, SolidWorks, Floor Planner, MATLAB, Simulink, RDS(Raymer Design Software), AAA(Advanced Aircraft Analysis), XFLR5, Mission Planner, System Toolkit, Tensor Flow. -Python -C++ -C Programming

Licensed Architect living abroad.

Licensed Architect living abroad.

I was born in Buenos Aires, Argentina on September 19, 1975. Following my desire to create, I graduated in 2002 as an architect at the University of Buenos Aires. This natural impulse to create has le... Read more

I was born in Buenos Aires, Argentina on September 19, 1975. Following my desire to create, I graduated in 2002 as an architect at the University of Buenos Aires. This natural impulse to create has led me work into multiple and diverse artistic activities. From an early age I have been involved with architecture, writing, 3d illustration and musical composition.

I am an Architect and I have enjoyed a challenging and diverse range of experiences since qualifying in 1997. I have spent much of my career involved in interior design, working internationally in Ca... Read more

I am an Architect and I have enjoyed a challenging and diverse range of experiences since qualifying in 1997. I have spent much of my career involved in interior design, working internationally in Canada, the USA and most recently Turkey. The Projects have included Yachts, multi outlet Retail, Restaurants, Hospitality, Point of Sale and Residential. My direct responsibilities have varied over the years and projects, but duties have pretty much covered everything from initial Client Briefing, through Concept Design, Coordination with other Architects, Structural Engineers, General and individual Trade Subcontractors (incl. Plumbing, Electrical, Stonework) to final delivery to the Client. I have spent a great deal of my time on Site, controlling quality, providing additional information to Contractors and dealing with conflict resolution. I am knowledgeable and productive with the usual software packages, and have particularly good experience with 3D construction modeling for production (Rhino) and preparing conceptual renderings (Maxwell). I have spent many years working as an outside resource for various companies including conventional building architecture, naval architecture as well as yacht and hospitality design. I can offer the following services and would love to have a conversation about your requirements; • Concept and design development • Preliminary and final layouts, elevations, construction details and workshop drawings. • 3D modeling from 2D drawings • 3D conceptual renderings • Material and fixture specification

I am an expert in exterior architectural 3d renderings. In 1997, when I was still at school, I installed 3D Studio MAX R2 on my computer. I dreamed of making my home and my street and after 3 years of... Read more

I am an expert in exterior architectural 3d renderings. In 1997, when I was still at school, I installed 3D Studio MAX R2 on my computer. I dreamed of making my home and my street and after 3 years of studying I did it! Let and not very cool :). Since then, my whole life is dedicated to 3d graphics. I am very interested in plants and experienced user Grow FX - a wonderful tool to create high-quality plant models. I will make your exterior scenes alive and interesting and fill with plants appropriate to your climate.

I have 8+ years of experience in the field of Modelling and Simulation. My skills - Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), Noise Vibration and Harshness (NVH), Thermal An... Read more

I have 8+ years of experience in the field of Modelling and Simulation. My skills - Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), Noise Vibration and Harshness (NVH), Thermal Analysis, Electro-magnetics, Manufacturing process simulation (Injection molding, Thermoforming, Blow molding, Casting, Forging), Professional report writing Software - ANSYS, Abaqus, MATLAB Scripting, ANSYS Fluent, COMSOL Multiphysics, ANSYS Maxwell, Solidworks I have done multiple projects related to all major sectors such as automobile and hydraulics. Few of the projects are: 1. Air (Fluid) flow analysis of a ceiling fan for different blade designs and optimisation for uniform air distribution using CFD. Noise analysis using air pressure generated on the fan blades. Structural analysis for stresses and deformation caused at full RPM 2. Brake disc and pad assembly analysis - stress analysis, NVH analysis for different system parameters 3. Injection mold design - Filling, packing, warping and cooling analysis of a polymer (plastic) product. Optimization of cooling channels, reduce cycle time and optimize part strength depending on fiber orientation. Above mentioned projects are selected few from many that i have done till date.

We are a 3D Design and 3D print company based in Glasgow Scotland. We consist of 2 professional CAD designers, both with Masters degrees in Product Design Engineering. Check out www.st3p3d.com for... Read more

We are a 3D Design and 3D print company based in Glasgow Scotland. We consist of 2 professional CAD designers, both with Masters degrees in Product Design Engineering. Check out www.st3p3d.com for some examples of our work.

Results-driven electrical engineer with expertise in electromagnetics and electric machine design. Proficient in developing and optimizing Permanent Magnet Synchronous Motors (PMSM) and Brushless DC M... Read more

Results-driven electrical engineer with expertise in electromagnetics and electric machine design. Proficient in developing and optimizing Permanent Magnet Synchronous Motors (PMSM) and Brushless DC Motors (BLDC) for various industrial applications. Skilled in finite element analysis (FEA) and electromagnetic simulation with hands-on experience using Ansys Maxwell, Motor-CAD and COMSOL. Strong background in high-speed motor/generator design for energy storage application. Adept at prototyping and system-level optimization. Proven track record in cross-functional collaboration and driving innovation to enhance motor efficiency, reliability and performance. In addition to my engineering work, I am the creator of "Mind Your Motors", a LinkedIn newsletter dedicated to electric machine design. I launched this initiative to create a transparent, technical and accessible platform for sharing insights and engaging with the global engineering community. Through this platform, I aim to explore technical topics, share lessons learned from real-world projects and foster dialogue between professionals, students and researchers. I am passionate about advancing the state of electric motor technology through thoughtful engineering, sustainable design principles and open collaboration. Whether through project work, industry engagement or technical communication, my goal is to contribute meaningfully to the future of electrification. I am seeking opportunities to contribute to cutting-edge advancements in electric motor design. If you are working on electrification, electric machines or adjacent technologies and believe there’s an opportunity to collaborate, I welcome the connection.