Hire the best freelance 2D Analysis expert designers for your company

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA s... Read more

• Mechanical design engineer with a master’s degree in mechanical engineering from Iowa State University • Over 4 years of working experience in 3D modeling and structural analysis using CAD and FEA software programs • Thorough understanding of design and analysis procedures, and proper material selection to ensure safety and optimal functionality of final product • Demonstrated proficiency in using SolidWorks, CATIA and Ansys through various school projects and past internship experiences • My capstone project required me to design a compact device, from a bulkier version, which harnessed nano aqueous ozone generator device components. The device intends to replace commercial detergents in the market with nano aqueous ozonated water to kill microbes • My internship at Albabtain Power and Telecommunication Co. saw me design components such as base flange, poles, and other accessories and assembled these components together, created drawing sheets ready to be used by fabricators, and worked on optimizing the components for optimal performance and cost reduction • At ITW, I used Ansys to compare the performance of a regular steel dowels used in concrete to a waveform shaped joint and conducted a full factorial DoE on the said waveform joint to determine the design with optimal results. Also, I suggested configurations and solutions to a production machine's rotary disc that failed due improper constraint based on intensive FEA analysis and design optimization

Professional designer with 8 years experience Ph.D. Candidate in machine design and manufacturing Visiting Professor

Professional designer with 8 years experience Ph.D. Candidate in machine design and manufacturing Visiting Professor

Punctual, self-motivated, adaptable, collaborative, disciplined, and flexible. I have redesign equipment and led engineers on projects for #1 rolling mill at Steel of West Virginia. I have 5 years of... Read more

Punctual, self-motivated, adaptable, collaborative, disciplined, and flexible. I have redesign equipment and led engineers on projects for #1 rolling mill at Steel of West Virginia. I have 5 years of equipment designing and reverse engineering experience.

My speciality is mechanical design for manufacturing. My current program is SolidWorks (but I have experience with Inventor, Creo, Onshape). I have 10 years of experience in mechanical design in manuf... Read more

My speciality is mechanical design for manufacturing. My current program is SolidWorks (but I have experience with Inventor, Creo, Onshape). I have 10 years of experience in mechanical design in manufacturing companies as Garrett Advancing Motion, PBS, European Cryogenics. I have masters degree in power engineering.

I have experience working with memphis Architectural firms and i'm currently a student at TCAT i am studying autoCAD/Drafting

I have experience working with memphis Architectural firms and i'm currently a student at TCAT i am studying autoCAD/Drafting

𝐄𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞𝐝 𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 𝐑𝐞𝐚𝐝𝐲 𝐭𝐨 𝐁𝐫𝐢𝐧𝐠 𝐘𝐨𝐮𝐫 𝐈𝐝𝐞𝐚𝐬 𝐭𝐨 𝐋𝐢𝐟𝐞 Greetings! I'm Engr. Muhammad Mubashir, a passionate mechanical design engineer with a proven track record of turning concepts... Read more

𝐄𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞𝐝 𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 𝐑𝐞𝐚𝐝𝐲 𝐭𝐨 𝐁𝐫𝐢𝐧𝐠 𝐘𝐨𝐮𝐫 𝐈𝐝𝐞𝐚𝐬 𝐭𝐨 𝐋𝐢𝐟𝐞 Greetings! I'm Engr. Muhammad Mubashir, a passionate mechanical design engineer with a proven track record of turning concepts into reality. With a keen eye for detail and a dedication to innovation, I specialize in providing top-notch mechanical design solutions across a wide range of industries. 🔧 𝐄𝐱𝐩𝐞𝐫𝐭𝐢𝐬𝐞 𝐚𝐧𝐝 𝐒𝐩𝐞𝐜𝐢𝐚𝐥𝐢𝐳𝐚𝐭𝐢𝐨𝐧𝐬: ✅ 𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥 𝐃𝐞𝐬𝐢𝐠𝐧:From concept development to detailed design, I excel in creating robust mechanical solutions tailored to meet your project requirements. ✅ 𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐃𝐞𝐯𝐞𝐥𝐨𝐩𝐦𝐞𝐧𝐭: I thrive on transforming ideas into tangible products, ensuring functionality, manufacturability, and market success. ✅ 𝐂𝐀𝐃 𝐌𝐨𝐝𝐞𝐥𝐢𝐧𝐠: Proficient in industry-leading software such as Solidworks, Autodesk Inventor, and Fusion 360, I craft precise 3D models and assemblies with meticulous attention to detail. ✅ 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬: Leveraging tools like Ansys and Comsol, I conduct comprehensive simulations to optimize designs for performance, reliability, and cost-effectiveness. ✅ 𝐏𝐫𝐨𝐭𝐨𝐭𝐲𝐩𝐢𝐧𝐠 𝐚𝐧𝐝 𝐓𝐞𝐬𝐭𝐢𝐧𝐠: With hands-on experience in prototyping and testing, I ensure that designs meet or exceed expectations before final production. ✅ 𝐑𝐞𝐯𝐞𝐫𝐬𝐞 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠: Capable of reverse engineering existing components or systems to improve performance, compatibility, or efficiency. ✅ 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐃𝐨𝐜𝐮𝐦𝐞𝐧𝐭𝐚𝐭𝐢𝐨𝐧: Skilled in generating detailed technical documentation, including 2D drawings, assembly instructions, and bill of materials (BOM), to streamline the manufacturing process. ✅ 𝐈𝐧𝐝𝐮𝐬𝐭𝐫𝐲 𝐊𝐧𝐨𝐰𝐥𝐞𝐝𝐠𝐞: With a deep understanding of various mechanical engineering fields, including machine design, thermodynamics, fluid dynamics, and heat transfer analysis, I bring valuable insights to every project. ✅ 𝐃𝐞𝐬𝐢𝐠𝐧 𝐒𝐨𝐟𝐭𝐰𝐚𝐫𝐞 𝐄𝐱𝐩𝐞𝐫𝐭𝐢𝐬𝐞: - Solidworks - Fusion 360 - Geomagic Design X - Autodesk Inventor - AutoCAD - PTC Creo 8.0 - PTC Onshape ✅ 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬 𝐚𝐧𝐝 𝐒𝐢𝐦𝐮𝐥𝐚𝐭𝐢𝐨𝐧 𝐒𝐨𝐟𝐭𝐰𝐚𝐫𝐞: - Ansys - Comsol - Therm (Heat Analysis) ✅ 𝐑𝐞𝐧𝐝𝐞𝐫𝐬 𝐚𝐧𝐝 𝐕𝐢𝐬𝐮𝐚𝐥𝐢𝐳𝐚𝐭𝐢𝐨𝐧 𝐒𝐨𝐟𝐭𝐰𝐚𝐫𝐞: - Keyshot - Blender - Rhino ✅ 𝐏𝐚𝐫𝐚𝐦𝐞𝐭𝐫𝐢𝐜 𝐌𝐨𝐝𝐞𝐥𝐢𝐧𝐠 𝐒𝐨𝐟𝐭𝐰𝐚𝐫𝐞: - Python Cadquery - FreeCAD - OpenSCAD 🏆 𝐖𝐡𝐲 𝐂𝐡𝐨𝐨𝐬𝐞 𝐌𝐞? ✨ 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐀𝐬𝐬𝐮𝐫𝐚𝐧𝐜𝐞: I am committed to delivering high-quality work that exceeds your expectations and meets project deadlines. ✨ 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧:Clear and prompt communication is key to project success. I ensure that I understand your needs and keep you updated throughout the process. ✨ 𝐂𝐨𝐥𝐥𝐚𝐛𝐨𝐫𝐚𝐭𝐢𝐯𝐞 𝐀𝐩𝐩𝐫𝐨𝐚𝐜𝐡: I believe in collaboration and welcome your input and feedback at every stage of the project. ✨ 𝐂𝐥𝐢𝐞𝐧𝐭 𝐒𝐚𝐭𝐢𝐬𝐟𝐚𝐜𝐭𝐢𝐨𝐧: Your satisfaction is my priority. I go above and beyond to ensure that you are delighted with the result. Let's collaborate to bring your mechanical engineering projects to fruition. Whether you need assistance with product design, analysis, visualization, or parametric modeling, I'm here to help. Feel free to reach out, and let's discuss how we can turn your ideas into reality! With Best Regards, 𝕰𝖓𝖌𝖗. 𝕸𝖚𝖍𝖆𝖒𝖒𝖆𝖉 𝕸𝖚𝖇𝖆𝖘𝖍𝖎𝖗

Welcome! I am a Mechanical Engineer and certified Professional in AutoCad 2D & 3D, 3d Studio Max and Solidworks with the Experience of 5+ years. I will create Floor Plans, Architectural Buildings, pro... Read more

Welcome! I am a Mechanical Engineer and certified Professional in AutoCad 2D & 3D, 3d Studio Max and Solidworks with the Experience of 5+ years. I will create Floor Plans, Architectural Buildings, product design, Mechanical Modelling, Sheet Metal work, 3D prototype and do 3D Rendering of Landscapes Sceneries and any industrial product for your Projects. I also have experience in CNC Machining and very handy to generate G codes and M codes. I have a strong grip in Software like AutoCad, 3D Studio Max, Solidworks, Autodesk Inventor and Lumion. Completion of Projects in time is my top most Priority. You will find me very cooperative. I'll take the opportunity and convert it into results. I have special and unique skills in the above mentioned software which separates me from others. Feel free to contact me if my skills suits your Project. Thank you. Regards, Aurang Zeb Shadab

I'm a mechanical engineer , i hope i can help you with solidworks , Autocad and comsol I can help with 3D modeling , simulation , Heat transfer and fluid flow analysis

I'm a mechanical engineer , i hope i can help you with solidworks , Autocad and comsol I can help with 3D modeling , simulation , Heat transfer and fluid flow analysis

Degree: Dipl.-Ing. Study: Mechanical Engineering; Department of Machine and Industrial Product Design / Department of Polymer Engineering; Budapest University of Technology and Economics

Degree: Dipl.-Ing. Study: Mechanical Engineering; Department of Machine and Industrial Product Design / Department of Polymer Engineering; Budapest University of Technology and Economics

2 years as Mechanical Structural Aerospace Engineer for ASTRIUM ST (as APSIDE consultant). Design military and civilian mechanical finite elements models (1D, 2D, 3D, linear, non-linear, buckling,... Read more

2 years as Mechanical Structural Aerospace Engineer for ASTRIUM ST (as APSIDE consultant). Design military and civilian mechanical finite elements models (1D, 2D, 3D, linear, non-linear, buckling, resonance). Designed 3D FEM of Ariane 5 head auxiliate propulsor with SAMCEF Field, calculed max tempeture on ground and flight and determined the new thermical protection to gain load. 6-months internship at MBDA Missile Systems on the very high speed vehicule LEA as simulation and design system engineer. Open to new jobs opportunities around the world.

Mechanical Design Expert, Catia, FEM Analysis, tubing design, aircraft design, mechanical part design, installation design, tolerancing

Mechanical Design Expert, Catia, FEM Analysis, tubing design, aircraft design, mechanical part design, installation design, tolerancing

I am a broadly skilled Mechanical Design Engineer with a Bachelors Degree. I have worked in a variety of industry sectors over the past 6-years having worked within the Water and Waste Water, Power G... Read more

I am a broadly skilled Mechanical Design Engineer with a Bachelors Degree. I have worked in a variety of industry sectors over the past 6-years having worked within the Water and Waste Water, Power Generation, Oil and Gas, and Electronics Manufacturing sectors. My primary skills are 3D CAD, Detail Manufacturing Drawings and FEA Analysis. I am experienced with Machined Component, Castings, Sheet Metal, and Plastic Part Design.

I've completed my graduation in Mechanical Engineering. Total years of experience in industry is 5.5 years. Out of which 4 years in design, 6 months in production assembly and 1 year in quality assura... Read more

I've completed my graduation in Mechanical Engineering. Total years of experience in industry is 5.5 years. Out of which 4 years in design, 6 months in production assembly and 1 year in quality assurance.

Hello! If you looking for fast solution of your problem - Contact me! I am a site engineer with MSc degree, working as a general contractor, having experience in various areas of construction proc... Read more

Hello! If you looking for fast solution of your problem - Contact me! I am a site engineer with MSc degree, working as a general contractor, having experience in various areas of construction process. Serious CAD skills with few years experience.

Began work fabricating Drawbar trailers and demountable systems for UK road use. Then moved into the design office when I was 17 and began work designing the systems completing all associated design c... Read more

Began work fabricating Drawbar trailers and demountable systems for UK road use. Then moved into the design office when I was 17 and began work designing the systems completing all associated design calculations and 3D drawings. I then moved to the largest Offshore cargo carrying unit manufacturing company in the world and began designing all types of units to transport all types of equipment in the offshore oil market. Conducting customer design survey, full design calculations, drawing submission to relevant body, and final 3D working drawings for manufacture. Fully conversant with DNV 2.7-1 Offshore design standard.

Specializing in injection molded electronics enclosures. Waterproof enclosures which meet IP68 standards. I will design and prototype an enclosure, test it for required IP rating, modify the design fo... Read more

Specializing in injection molded electronics enclosures. Waterproof enclosures which meet IP68 standards. I will design and prototype an enclosure, test it for required IP rating, modify the design for the injection molding process and deliver the manufacturing documents. I will also work with your factory to ensure quality. Over 15 years of design for manufacturing experience. I'm a problem solver with a proven track record of successfully bringing products and projects to market. Proficient in Computer-Aided Design (CAD), prototyping, design for manufacturing (DFM), Computer-Aided Manufacturing (CAM) programming, creative direction, and production management. I have a well-rounded skill set, including in-depth knowledge of DFM, hands-on experience, a strong background in sales, and a high degree of creativity. I'm committed to driving operational excellence by actively engaging with all facets and levels of the organization, a results-oriented team player with a focus on achieving success through collaborative efforts. I have a passion for mechanical engineering, 3d modeling, designing mechanical assemblies, and physically building prototypes using a wide-range of manufacturing processes. I'm skilled in DFM for additive, injection molding, machining. and sheet metal. I work in cutting-edge technology in the medical industry but have worked on project in many different industries. I design and prototype on a daily basis and using PLA, SLA, and SLS printing as well as cnc machining for quick turn-around proof-of-concept prototyping. I am experienced in validation testing and moving to production phase. I offer a proven successful design process with project management software taking your product ideas from concept - to prototype - to validation - to DFM pre-production - to production - and through to product launch. I will generate all the required manufacturing documents and assemble a complete product package. I will communicate with your manufacturing partners (factory) to ensure accuracy and a smooth process. My services include but are not limited to: - Engineering - 3D modeling - Mechanical Assemblies - Electrical Routing Design, PCB protection - Casings, Housing - Mechanical Systems Design - Product Design - FEA - Product Lifecycle Management - Production Management - Design for Manufacturing - Generative Design - Parametric Modeling - CAD and CAM - Quality Systems Management - Materials Applications - Motion Studies - Thermal Analysis - Stress Simulation Studies GD&T - 3D Renderings - Tech Packs - Technical Drawing - GD&T - BOM (Bill of Materials) creation and maintenance - Hardware selection and design (McMaster- Carr) - Sheet Metal Design - Lattice structure design and Carbon 3D Design Engine SOFTWARE: - Fusion360 - Inventor - AutoCAD - Solidworks - MasterCAM - Carbon 3d Design Engine "Mechanical Engineer", "Mechanical Design Engineer", "Product Design Engineer", "3D CAD Engineer", "2D Drafting Specialist", "SolidWorks Expert", "AutoCAD Expert", "Fusion 360 Designer", "CATIA Designer", "Creo Engineer", "Autodesk Inventor Specialist", "Manufacturing Design Engineer", "GD&T Specialist", "Engineering Drawing Expert", "BOM Creation Specialist", "DFM Engineer", "DFA Engineer", "FEA Engineer", "Stress Analysis Engineer", "Thermal Analysis Engineer", "CFD Engineer", "Motion Analysis Engineer", "ANSYS Specialist", "Structural Analysis Engineer", "CNC Machining Engineer", "Sheet Metal Design Engineer", "Injection Molding Design Engineer", "Die Casting Engineer", "Rapid Prototyping Engineer", "3D Printing Specialist (FDM, SLA)", "Prototype-to-Production Engineer", "Industrial Equipment Design Engineer", "Automotive Component Design Engineer", "HVAC Design Engineer", "Robotics & Automation Engineer", "Consumer Product Design Engineer", "Machinery Design Engineer" MANUFACTURING EXPERIENCE: * Additive - Design for and operation of PLA and SLA resin printers. Design for SLS & MJF. Experienced with generative design and lattice structures. * CNC Machining - CAM toolpath and operation of cnc milling, set-up, and fixturing. Experience with Haas, Fadal, and Laguna. * Plasma Cutting, Laser Cut, Water-jet - Design and nesting in CAD including sheet metal bend. Operation of plasma cutting, CO2 laser cut/etch, and water-jet cutting. * Injection Mold - Design for large-scale plastic mold injection production. Hands-on experience with APSX small-scale injection mold machine. * Assembly and Prototyping - Prototyping assembly and documentation of complex mechnical and electrical systems. Documentation preparation for transition to production phase. * Electrical Systems and Cable Routing - PCB layout, component selection and orientation, connector selection, cable routing and management. * Fabrication - Preparation of technical drawings in accordance with GD&T standards.

Highly creative and upbeat Piping Engineer with 3 years experience in EPC (Engineering Procurement Construction ) companies specialized in oil and gas industries, producing 3D Plant Model and drawing... Read more

Highly creative and upbeat Piping Engineer with 3 years experience in EPC (Engineering Procurement Construction ) companies specialized in oil and gas industries, producing 3D Plant Model and drawing using P&ID's, and providing Stress Analysis according to project specifications. skils: • Preparing 3D models and 2D drawings using CADWorx Plant. • Revieving 3D models using Autodesk Navisworks Review software. • Developing piping isometric drawings. • Producing vessel drawigns using CADWorx Equipment, AutoCad. • Checking piping isometrics per P&ID and specifications. • Creating piping specifications-database using CadWorx specification editor. • Pipe stress analysis using software Caesar II. • Preparing the Stress Critical Line list.

I'm an engineer with a knack for analysis and design. I'm keen to solve engineering problems across industries using a broad spectrum of analytical and numerical techniques. I have over five years of... Read more

I'm an engineer with a knack for analysis and design. I'm keen to solve engineering problems across industries using a broad spectrum of analytical and numerical techniques. I have over five years of experience designing and analyzing new products using SolidWorks.

I am a Structural & Mechanical Analysis Engineer with advanced experience in finite element methods (FEA), composite structures, and mechanical design for aerospace, defense, and automotive applicatio... Read more

I am a Structural & Mechanical Analysis Engineer with advanced experience in finite element methods (FEA), composite structures, and mechanical design for aerospace, defense, and automotive applications. I hold a bachelor’s degree in Mechanical Engineering and I am currently pursuing a master’s degree in Solid Mechanics. I specialize in the complete structural analysis workflow, including geometry preparation, meshing, composite layup modeling, load definition, contact modeling, result evaluation, and engineering reporting. I have strong hands-on experience with ANSYS Mechanical, APDL, SpaceClaim, Ansys Composite Pre-Post, and MSC Apex. My technical expertise includes: • Linear & nonlinear static analysis • Modal, buckling, frequency, and vibration simulations • Composite material modeling, failure criteria, and damage tolerance • Contact, meshing optimization, and complex assembly preparation • Load case development and structural performance evaluation • APDL scripting and automation of analysis processes • Weight estimation, optimization, and structural improvement studies Selected project experience: • Structural analysis of UAV components (wings, tails, fuselage sections, brackets, landing gear) • Composite layup modeling and strength evaluation for aerospace structures (AKINCI, TB-3, KIZILELMA) • Modal and damage resistance analysis of avionics brackets and landing gear components • Flow simulation over NACA airfoil using RBVMS formulations • Crash management system optimization for automotive applications • Flight control surface and actuator design, dynamic modeling, and system simulation • Rocket launch and landing equations and dynamic modeling studies I am highly detail-oriented, analytical, and passionate about solving complex engineering problems. My goal is to deliver precise and reliable FEA results supported by clear technical documentation and practical engineering recommendations. If you need professional support in structural analysis, composite structures, FEA modeling, or mechanical design, I can help you achieve accurate and high-quality results.

I am an energetic, ambitious person who has developed a mature and responsible approach to any task that I undertake, or situation that I am represented with.

I am an energetic, ambitious person who has developed a mature and responsible approach to any task that I undertake, or situation that I am represented with.

Catia, NX, Creo, ANSYS, Fusion, AutoCAD. Comsol Multiphysics, Altair Simsolid, Novice Researcher ( Currently only preprints, no peer review papers)

Catia, NX, Creo, ANSYS, Fusion, AutoCAD. Comsol Multiphysics, Altair Simsolid, Novice Researcher ( Currently only preprints, no peer review papers)