create a parametric CAD model
in
3D Modeling Design
held by
sean
Last seen:
2017-05-01 05:29:29
Contest Ended, Winner(s) have been selected.
Description:
I have a 3d model of an upright that was produced using topology optimisation software. The optimised model provided must be used as a guide to create a parametric CAD model.The optimised solution will be provided as a solid works file and
I will require the finished CAD model as a SolidWorks file.
I will also provide the original upright design so that you can use it as a reference when creating the new design
I will need the job done by the 15th of october
Wants:
The new design must follow the contours of the optimised solution so that the mechanical properties of the new design match those of the optimised design. They must be better than those of the original designThe dimensions of the bearing sleeve and the bosses must remain the same. The total mass of the new design must not be less than 3.79 kg.
The new design must be as two parts (bearing sleeve and main body)
It will be made from AISI 4142 steel (bearing sleeve) and 7075-T6 aluminium alloy
Software:
- SolidWorks
Entries
#3 Sleeve and mainbody
by CADmate
The Bearing sleeve is 100% done while the Body is 80% done. the outer shape was done you can check on the picture and only the holes is not yet but I can work on it. All parts were fully parametric. you can edit anytime you want. I hope you satisfied on my work. Looking forward to hear from you. Thanks
Oct 12, 2014 14:52
Discussion
so, will you pick any-winner?
I'm only accepting entries up until the 15th of October.
Are you taking entries until 9 November as in the project info, or 15 October as in the description?
do you mean total mess is main body + bearing sleeve?

Hi
Nice work however your design is a lot heavier than the original. It should be a simiar weight to be considered optimised. Although it can't weigh any less.
Sean
I,ll submit dwgs within 12 hours
what about solidworks 2014
I need a new model created from the optimised design (not the original design). It must be the same mass and shape as the optimised design so that it has the same mechanical properties
again what about solidworks 2014
Hello. Do you accept the 3D model made in SolidWorks 2014?
As I understand,you have a model(R812 DA0483 A C )then you optimized it in optimized upright1 .And you want 3d model of that optimized design?
Will you upload the original .stl file of "optimized upright1"?
We can work to convert the original file, so it can be used by everyone
We can work to convert the original file, so it can be used by everyone
It would be useful to know under what kind of manufacturing (metal casting + CNC, CNC or only) the piece will be made
Actually uprights must be designed based on some loads that occur. can you explain Loads applied in each Mount/Stay?
perharps this link can help you provide a solid body for "optimized upright1"
https://grabcad.com/questions/how-do-i-convert-stl-graphics-to-a-solid-model
when it become solid body, it can be converted either .igs or .stp version
https://grabcad.com/questions/how-do-i-convert-stl-graphics-to-a-solid-model
when it become solid body, it can be converted either .igs or .stp version
So you want to create same model with "R812 DA0483 A C" but new model created in SolidWorks 2013 and must have historical drawing mechanism or featuremanager design tree so we can edit more easily in SolidWorks, so it will be parametric?
Sorry they are the only files I have
Can you Provide .stp file for optimized upright1? My Solidworks is 2012 version so it can't open 2013 version. please convert your file to .stp
Similar Contests on Cad Crowd
Large 3D bookshelf backstop
Inspired by the historical visual progression of mainboards, we are looking for an innovative design to use as the back of a large shelving unit.
We are looking for a design to go in a display case. The display case will then be used as a holder for glass shelves.
Think of it almost like a glass bookshelf. Except, instead of the back being a cheap piece of board held on with tack nails like a shelf from IKEA, the back will be the design you come up with.
Dimensions:
8ft wide
3ft high
1-3in deep
The case is being used to display tech items. So we would like the design to reflect technology. Think mother board but on our scale.
The original thought was to collect old motherboards, including ram and cpus. We were then going to lay them out on a 8x3 piece of plywood and glue them.
Instead of this, we now want to get a design that a CNC machine can make.
Material used:
Wood and old metal.
The design should induce a feeling of technological progression. So from left to right the design should transition from old circuit board tech, to current tech, to possible future tech (this part is open for interpretation)
As an example, in the attached picture, the green part is what we want to replace with our 3D circuit board idea. Please note that the picture is just one from google and does not represent the actual shelf we are building The entire shelf will sit on top of a table, meaning that it will be at eye level for the average person.
Medical Bin & Cover Re-design
Redesign of our medical storage bins and cover access methods. The overall industrial and mechanical design initiative should explore new methods and ways to reduce lid opening space. (See attached document for full details.)
Low Cost dental Chair Softgoods Design
The task at hand is to find an economic low cost method to manufacture and upholster adult dental chair soft goods. Quality and life of covering must be robust, 10+ year life. The dental chair soft goods typically consist of three major components; underlying support structure, many times this is a vacuum formed plastic element, the seat foam, and the upholstery itself (see attached photos). Dental chairs are normally divided into two main components; 1) The back structure, 2) The seating structure. Key to this design initiative, should include an alternate way of securing the leather to the underside of the chair. Most chairs currently utilize hundreds of staples to secure the fabric, this poses to problems: 1) High direct labor, 2) No way to easily replace the upholstery covering. We are seeking a new innovative design ideas for new methods of manufacture without using staples or typical snap fittings.
Bas Relief Panels
Create bas relief panel models to be CNC routed from MDF sheet. I will provide exact panel dimensions, sketches of the design and images to be modeled. Photos of similar examples attached.
Angled Keyboard Slide
The design requires a clean simple method with minimized parts and manufacturing costs. Product is low volume, 250 to 500 pieces per year. We are interested in minimizing capital tooling costs. Design challenge is to design a keyboard slide platform that sits at a 32.5 degree angle (see attached documents). Keyboard slide needs to easily lock in upward position when not in use, and needs to easily be released and slide downward when in use. The keyboard slide is on a cart platform, so when the cart is being moved around, if it gets bumped, we do not want the keyboard slide to dislodge and slip into the down position.
Albertus Putra
Designer