e-cigarette concept design
in
3D Modeling Design
held by
Steveuk
Last seen:
August 20, 2014
Contest Ended, Winner(s) have been selected.
Description:
Looking for someone to design a concept ecig and then into in to real life 3d render of your design we would also require a 3d model to pass to the mechanical designer. This does not require any mechanical designs it's a concept only.The materials that will be used are black gloss Carbon Fibre as the outer casing tube, with a pattern cut out exposing a rose gold plated tube that can be seen throughout the cuts in the carbon.
Other fittings like top & bottom covers, rings and bottom button in rose gold.
Wants:
Sizes ; Diameter : 22mm
Length : 72 mm
Don't Wants:
Only Innovative cool designs required please, the designs attached are boring and this is where we want you to show us what you got !
Software:
- 3D Modeling
Additional Information
Please not the ecig has to be a cylindrical tube shape as the photos due to the batteries, bends in the tube is not possible. Look at battery image attached and you can see why.For the top liquid tank/mouth piece, there does not need to be one designed, people choose there own style and screw it in to the top of the device.
Search " ecig tanks" you will see a vast array of choices, so no design is required for the top, but however for illustration purposes we need one on. I have attached a tank image you can copy or look on the net to choose one that suits your design.
The button must go at the bottom of the tube as it's spring loaded to make the connection, this is a mechanical device not electronic "Mechanical ecig mod" is what they are called.
You must search " Mechanical ecig mods" to see whats around and it will give you a much better understanding or otherwise you could be wasting your time.
Prepaid PrizeEntries
#1 e-Cigarette
by Simon
concept design for an e cigarette please let me know if im on the right track cheers
Jul 10, 2014 10:14
#2 E-cigarette by mcluka
by Luka B.
Hello,
This is my first entry for the "e-cigarette" competition. Unfortunately for some reason solidworks didn't allow to use the rose gold type, so I had to go on with standard gold. I hope this is okay for the means of presentation.
If you have any questions regarding my entry please send me a private message.
Regards, mcluka
This is my first entry for the "e-cigarette" competition. Unfortunately for some reason solidworks didn't allow to use the rose gold type, so I had to go on with standard gold. I hope this is okay for the means of presentation.
If you have any questions regarding my entry please send me a private message.
Regards, mcluka
Jul 13, 2014 12:51
#4 ECIG-WITH ROTATING SWITCH
by sharan.m
this design will have the battery setup tank in the black portion and the golden cap will act as the switch which will not be activated until the golden cap has been placed.
the upper golden color portion will generate the give the effect of filter to place inside mouth.
the upper golden color portion will generate the give the effect of filter to place inside mouth.
Jul 25, 2014 20:31
#5 E-cigarette version 2 by mcluka
by Luka B.
This is my second entry, an updated version of my first attempt. If you have any questions or suggestions please let me know.
Jul 26, 2014 19:29
#6 E-cigarette version 2 and 3 by mcluka
by Luka B.
This is my third version of the E-cigarette.
Jul 28, 2014 17:42
#9 ecig - 2
by vinya
ecig - 2
hi!
i wish to send 2 more designs, if u have feedback let me know.
Thanks,
vinya
hi!
i wish to send 2 more designs, if u have feedback let me know.
Thanks,
vinya
Aug 1, 2014 10:56
#18 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:24
#19 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:24
#20 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:25
#21 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:26
#22 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:27
#23 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:27
#24 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:28
#25 e*cig
by KenCad
NOTE: Thickness of carbon fiber tube can be reduced depending on outer diameter dimensions of the gold tube inside or the battery inside the casing.
Aug 9, 2014 14:29
#27 E-cigarette tiger skin V3
by Luka B.
Similar to V1 but with a bit smaller pattern.
Aug 9, 2014 15:44
#34 Updating models
by Razvi.N
I wanted to make a rendering of the models without the carbon fiber texture because with the texture you cant exactly see the shape of the casing very clearly so the rendering without the texture is very large and it includes all the models that i made so the details can be seen aproprietly, the Rhino 5 file includes all of them as well. The button for the mechanism is in the screenshot picture at the bottom of the tube, i this way the cases can stay verticaly when not in use so the cannot roll on the table or whatever surface they are placed on when they are placed horizontaly. The 3Ds Max file contains the ''WeaverBird'' design, it is like this because I used 3Ds Max to rafine the surface so the model would look like the one in the images.
Aug 9, 2014 22:38
#40 e*cig
by KenCad
another variation for the gold and chrome combination with carbon fiber trims, i will attach solidworks files upon request.
Aug 10, 2014 23:35
#41 e*cig
by KenCad
chrome and carbon fiber trim, i will attach solidworks files upon request.
Aug 10, 2014 23:36
#42 e*cig
by KenCad
gold and carbon fiber trim, i will attach solidworks files upon request.
Aug 10, 2014 23:37
Discussion
Thank you
Yes 22 outer
Hello Steve,
i want to verify if the 22mm diameter is for the outer or inner diameter of the tube?
Thanks!
i want to verify if the 22mm diameter is for the outer or inner diameter of the tube?
Thanks!
Look forward to it
I will post my new updated version in few days time.
ok, i am a mechanical designer. When you chose the concept, you can contact me
Similar Contests on Cad Crowd
Riding Glasses - Motorcycle
A new line of motorcycle riding glasses using elements from 3 different existing products to create a new and improved style of Glasses. Photochromic Lenses required.
Design of 3d photography studio
Design a small 1.5 m x 1.5 m booth that will be an "add on" to the back of our current photography studios. These studios are in the middle of shopping centres. Single profile only. We have a specific design in mind so if your are good at CAD you won't have a problem doing this with ease
Leather bracelet design
Hello
I need to design a stylish and interesting leather bracelets or leather and steel bracelets with the emphasize on a leather. I will attach some pictures with the similar items to what I want. It should be original and elegant. If I like the design, we will develop further relationship, as I will be ordering design continuously. I am looking forward for someone, who is passionate about leather jewelry.
Spa/health club annex
Convert a 2D, basic floor plan of spa/health facility into a 3D floor plan of spa/health facility. The project will require some creative adjustments to accentuate the look and feel of the facility to align with a spa-like environment. The addition of furniture items typical to spa/health settings will be required. This is a concept project and dimensions may change in the future as the project develops. The final objective/goal is a 3D model that can be used to confirm final dimensions, details, and other information with a larger stakeholder group as the project develops to a final stage of execution.
Chief Architect Designer - Exterior and Roof Design
Would like a prairie style modern home roof and exterior design based on floor plans. May be creative and please MUST use Chief Architect software. I have version X5 and X6. I have attached pictures of examples of what we are looking for.
Please incorporate:
-30" overhangs
-Low pitch
- Raised Entry
-Raised Rear Deck
KenCad
Designer