Stand Alone Cash Drawer
in
Product Design
held by
sal
Last seen:
2013-11-20 17:30:35
Contest Closed
Description:
Flip Top medal cash box for street and food venders. cdn.barcodegiant.com/images/models/lg/APG/flip-top.jpgLooking for a way to lock this to a table, ability to mount on a wall, or temp way to fasten to table.
Wants:
cdn.barcodegiant.com/images/models/lg/APG/flip-top.jpgL=9.5 inches
H=3.5 inches
D=3.5 Inches
Don't Wants:
Want something that I can give a medal shop or manufacturer. This cash drawer does not have to connect to a pos or register system.
Software:
- AutoCAD
Additional Information
The actual plastic insert that would go in to hold paper money and change would have to be changed. So the plastic insert that divides the bills should be for 1's ,5's 10' 20' 100's with only 2 coin holders
Im looking for a very detailed design that can be given to a manufacture for production
flip top should flip opened when key is turned.
also this design should show how would be locked to a table some sort of screw in mechanism so the box can be locked to a table and removed
Entries
Discussion
will you accept a pro engineer design ???
i can give that in SW2012 will that be ok?
Medal 1/8 -2/8
Which material is you are looking for. May I know the thickness if the material
OK I will update and send you. Please give your email id or shall I upload one more time
The actual plastic insert that would go in to hold paper money and change would have to be changed. So the plastic insert that divides the bills should be for 1's ,5's 10' 20' 100's
with only 2 coin holders
Im looking for a very detailed design that can be given to a manufacture for production
flip top should flip opened when key is turned.
also this design you have given doesnt show how would be locked to a table some sort of screw in mechanism.
with only 2 coin holders
Im looking for a very detailed design that can be given to a manufacture for production
flip top should flip opened when key is turned.
also this design you have given doesnt show how would be locked to a table some sort of screw in mechanism.
yes h and D are the same
The actual plastic insert that would go in to hold paper money and change would have to be changed.
Im looking for a very detailed design that can be given to a manufacture for production
The actual plastic insert that would go in to hold paper money and change would have to be changed.
Im looking for a very detailed design that can be given to a manufacture for production
Are you looking for 3d model or 2d drawing?
H=3.5 inches
D=3.5 Inches
H & D Dimensions are same ?
D=3.5 Inches
H & D Dimensions are same ?
Similar Contests on Cad Crowd
Hollow ball that can open
I need a plastic prototype design in 3D. This object is a hollow ball (20mm in diameter, 1mm in thickness). The ball is composed of 2 parts (top and bottom piece). The top piece will slide into the bottom piece. On the top of the ball are small air vents (0.7mm) that form the shape of a circle. The bottom of the ball will have an opening (4mm diameter). There is a small arch inside the ball that sits at the base. The arch will extend from one end of the opening to the other. The arch will will be 1 mm in thickness. I have attached images I created with paint.
Plastics Engineer Needed
I am working out a proof of concept for a marine habitat and need an expert who understand techniques of pvc/vinyl or other plastic joinery, using specific glues and (initially) existing extruded shapes. I will provide sketches and my ideas. The plastics engineer will provide feedback and (later on) CAD.
Oyster Cage
I need some oyster pots. The wire mesh will be 1/2" and the sides and center support will be made out of plywood. The mesh will be plastic coated steel from Riverdale Mills (1/2" center to center). Cage will be a cylinder with a 12" radius and a length of 4 feet. There will be a 3/4" rod passing through the center. Unlike other cages, one end will open for loading and unloading the oysters. See theoysterguy.com faq pdf for an idea of what I am looking for. Also see attached picture. I have come up with one idea for closing the ends, but any other ideas will be appreciated. The parts will be cut out of 1/4" plywood and cut out on a cnc machine (shopbot). Parts will then be coated in epoxy to make them waterproof. I want ease of assembly. Notches to align wire mesh. Longitudal arms should notch into center piece and have tabs to align outer ends. There should be hole in the sides to allow for waterflow and leverage when closing and opening one end.
Smart Bracelet - CAD Designer Contest for New Product
The e-touch
The e-touch is a smart bracelet that has to be synced to your mobile device, when entering an event, meeting or club. When the connection between your mobile device and the e-touch is made, you can go ahead and 'e-Shake'.
How does it work?
When entering an event you’ll receive an e-Touch bracelet. By shaking hands with other people wearing an e-Touch, the bracelets connect and sync information trough your handshake, called the ”e-Shake”. The information received trough e-Shaking will be sent to an app, called Shake-on, on your mobile device which will store the information on your phone. Depending on your app settings/preferences the new information/friendship will be published on your Shake-on account (your personal page on the Shake-on social website).
BBladez
a dual kidney shaped tubular design to fit the contours of human buttocks and support up to 300 lbs.
danial