Bucket CouplerBlind

in 3D Animation Services held by williamm5
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
I'm trying to illustrate how my product will be assembled and its various configurations... In this initial animation, I just want to see the parts come together... This device is basically a short cylinder with seals on each side that allows a standard 5 gallon bucket to be attached in order to create one large container...
Wants:
I'm going to keep this simple... I will provide a few different cad files, and I just want an animation of the completed container come together from the individual parts
Ask for Sample:
This should not be a difficult task for an expert

Entries

= Buyer's Rating
1st Winner
#52 Bucket coupler V6 by Flaviano Crespi
Aug 19, 2022 20:49
2nd Winner
#49 Bucket Coupler_002 by Burhanuddinn
Aug 19, 2022 10:14
#57 Bucket Coupler_003 by Burhanuddinn
Aug 22, 2022 9:51
#55 Bucket Coupler by Pavan Patel
Aug 20, 2022 20:11
#37 Bucket Coupler by Fadi Sayegh
Aug 16, 2022 5:06
#50 Bucket Coupler by Fadi Sayegh
Aug 19, 2022 17:45
#19 Bucket Coupler_001 by Burhanuddinn
Aug 14, 2022 19:51
#54 Bucket Coupler by raniljoseph
Aug 20, 2022 18:02
#32 Bucket coupler animation V4 by Flaviano Crespi
Aug 15, 2022 15:55
#1 Bucket coupler animation by Flaviano Crespi
Aug 13, 2022 21:18
#48 Bucket Coupler by abhi007
Aug 18, 2022 17:20
#47 Bucket coupler animation V5 by Flaviano Crespi
Aug 18, 2022 16:44
#36 Bucket Coupler by Fadi Sayegh
Aug 16, 2022 0:14
#53 Bucket Coupler Assembly updated with internal pipes by abstar25
Aug 20, 2022 11:41
#15 Bucket Coupler 3D Animation Video Rendering. by M_GAMAL_AWADELNOUR
Aug 14, 2022 14:47
#14 Bucket Coupler by CDdesignSTUDIO
Aug 14, 2022 13:29
#46 Animation of Buckel Assembly by HamidrezaNosratpour
Aug 18, 2022 16:21
#10 Best_Bucket_Coupler_Design by dha
Aug 14, 2022 10:20
#8 Bucket Coupler by CDdesignSTUDIO
Aug 14, 2022 9:10
#6 Bucket Coupler by Gregorius Giga
Aug 14, 2022 7:27
#3 Bucket Coupler Rendered Animation GIF by M_GAMAL_AWADELNOUR
Aug 13, 2022 22:33
#43 New animation+ added some extra parts by HamidrezaNosratpour
Aug 17, 2022 18:20
#39 Bucket Coupler #1 by RRM
Aug 16, 2022 20:21
#45 Bucket Coupler by taposray_rt
Aug 18, 2022 3:24
#44 Submission #3 by Franson SilverRock
Aug 18, 2022 1:32
#33 Bucket container assembly by abstar25
Aug 15, 2022 16:28
#29 Bucket coupler assembly; Submission 2 by Franson SilverRock
Aug 15, 2022 12:39
#27 container coupler1 by ayushk
Aug 15, 2022 8:09
#26 Bucket Coupler by abhi007
Aug 15, 2022 6:19
#25 Bucket Coupler by abhi007
Aug 15, 2022 5:56
#13 Animation of Assembly by HamidrezaNosratpour
Aug 14, 2022 13:23
#11 Bucket Assembly by haroona1
Aug 14, 2022 11:28
#30 Bucket coupler animation by Mandar Salunkhe
Aug 15, 2022 14:44
#58 Bucket Coupler Assembly R1 by Routhians
Aug 22, 2022 16:58
#42 container coupler1 by ayushk
Aug 17, 2022 17:11
#35 Bucket Coupler by Mecanikad
Aug 15, 2022 19:58
#34 Bucket coupler by REDA
Aug 15, 2022 19:54
#28 Final version by haitham
Aug 15, 2022 8:36

Discussion

williamm5

Buyer

Mon, 22 Aug 2022 06:58:04 +0000
I have started my new contest, and i'm going to be adding more prizes... It is just a continuation of this project... If you need some ideas, just let me know and I will give you some suggestions...

williamm5

Buyer

Sat, 20 Aug 2022 00:02:00 +0000
I am an inventor, so this is just one out of MANY ideas that I have come up with... So stay tuned because there will be many more contests from me in the future...

williamm5

Buyer

Fri, 19 Aug 2022 23:59:21 +0000
I have a patent for this product, but I am still trying to convince investors to fund its development...

williamm5

Buyer

Fri, 19 Aug 2022 23:55:29 +0000
Since this device is air tight (when the port holes are plugged and/or connected with pipes or hoses), it can actually float on water to act as a buoy, or even pontoons (if at least a few of them are used)... If you partially fill it with water it can even become a ballast tank... this device can be buried in the ground or encased in concrete for a more permanent placement... it can be used as a filter, a portable septic tank, a fuel tank, and with the right configuration of internal and external pipes it can work in any orientation... I am going to create a new contest as soon as this one is complete, because I would love to see any of the ideas that I just mentioned illustrated by professionals, and extra points for new ideas about different ways this product can be used...

abhi007

Designer

Fri, 19 Aug 2022 12:25:41 +0000
Hi @williamm5, just here to let you know that you could also choose multiple winners by splitting the amount prize ;-) And thank you for those amazing words of appreciation. Means a lot for artists like us.

williamm5

Buyer

Fri, 19 Aug 2022 09:18:16 +0000
due to the fact that this is my first time using this platform, I didn't realize that there would be so many amazing entries, making it so extremely difficult to choose a single one as a clear winner... It makes me feel bad for all of the talented designers who still took the time to submit such incredible work, but won't be chosen as the winner... this website is unbelievably awesome, and yet it also presents the unpleasant predicament of disappointing all but one individual...

williamm5

Buyer

Thu, 18 Aug 2022 06:09:55 +0000
This can be done using standard pipe fittings... I have built a working prototype

shubhamworks

Designer

Thu, 18 Aug 2022 03:09:39 +0000
I don't get it, how these pipes are joined and how these are coming out of coupler in different directions?

williamm5

Buyer

Thu, 18 Aug 2022 03:00:41 +0000
I have added new attachments

williamm5

Buyer

Thu, 18 Aug 2022 02:47:21 +0000
With the container being slightly transparent so that you can see them

williamm5

Buyer

Thu, 18 Aug 2022 02:46:09 +0000
I want the pipes to be INSIDE the container

abhi007

Designer

Wed, 17 Aug 2022 16:28:52 +0000
Hi @williamm5, could you share any kind of reference for the modifications you mentioned below? Just to get an exact idea of what you actually needed.

Fadi Sayegh

Designer

Wed, 17 Aug 2022 16:08:44 +0000
Hello William,
could you explain more about the pipes exactly where should to be or if you can draw your idea on a paper would be good.
Thanks.

williamm5

Buyer

Wed, 17 Aug 2022 05:12:57 +0000
I would also like to add internal pipes, one from each of the two port holes going in opposite directions... since there are so many amazing animations to choose from, anyone who takes the extra initiative to add extra details like this will certainly get my attention... even pipes that are connected to the port holes on the outside of the container would create more value for consideration...

REDA

Designer

Mon, 15 Aug 2022 19:22:02 +0000
@Cadcrowd,
Hi,
i can't I participate in contests ....

taposray_rt

Designer

Sun, 14 Aug 2022 04:51:21 +0000
Hello william,
How much second the animation should be?
also resolution and fps?

williamm5

Buyer

Sat, 13 Aug 2022 20:14:47 +0000
Not sure what to use as background color... I will give you creative freedom on that detail...
Sat, 13 Aug 2022 20:11:10 +0000
On it !
Sat, 13 Aug 2022 19:42:38 +0000
Hello William
What background color will be best for this animation?

Similar Contests on Cad Crowd

Wet Floor Warning Signal
The aim of this product is to provide a device that can be placed on a Wet Floor sign to provide additional protection by warning people walking by that the floor is wet and slippery. It must include the following features/functions: 1. A small and bright flashing LED light(s) that helps people walking by, to see and pay attention to the Warning Sign. The light should have a switch that can be set to On, Off, or Motion Sensor . 2. A speaker that can be heard from any direction that radiates up to 10 feet with a volume control switch. The pre-recorded message would play when people get within 10 feet of the sign and say "Caution, Wet Floor". Again, There must be a switch that can be set to On, Off, or Motion Sensor. 3. A micro USB receptacle for recharging. Attached Images show: FIG1 - Sample Wet Floor Signs currently on the market that this new device would need to attach to universally and not be easy to steal. FIG2 - Shows a sample of a light fixture that is an example of how this could look, but with only 1 flashing yellow light facing front and back. FIG3 - Is an example of how lights are attached to construction signs. This concept is a good example of how just adding the light helps avoid accidents. FIG4 - This is the art used currently to explain the concept. It is NOT what we want. It is too big and doesn't need to have any words on it. But it does show how the inventor was thinking about each of the above features coming together, Light and Sound. The purpose of the animation is to demonstrate to companies how it works as thoroughly as possible without manufacturing a prototype. So, it should show how someone approaching it activates the light and should to warn them to walk around the wet floor.
Wackñata
The Wackynata is a patent pending device for hanging peñattas from a vertical structure (poll, tree, etc.) when there is no low hanging horizontal apparatus to hang it from. The purpose of the animation and images is to properly demonstrate what the product will look like when it is "retail" ready. The inventor has created a working model using off-the-shelf products to demonstrate how it will work but now needs it to be made "pretty" and modified with 1 thing that she couldn't buy off the shelf, the buckle, in a cost effective but functional way. Please replace with a CAM Buckle as demonstrated here: https://www.uscargocontrol.com/1-Cam-Buckle-White-Zinc-550lbs I have attached 3 files for your consideration: 1. The image titled "Parts" lays out all the parts that need to come together in a 3D design. 2. The video titled "Bracket" shows a metal bracket she bought from the store to demonstrate how it could work but is not intended to be the final version. Instad, there is a cardboard design illustrated that would be made out of metal instead for use. 3. The "In Use" video is a demonstration for you to see how it all works together so that you will know how it should work in the animation. The 3D video should show 1. How it is easily attached to the tree (or) pole 2. How it is used
coat and reflect
I am interested in a short (15 sec) 3D animation which demonstrates adding a coating onto a 3D object and how the coating acts as a barrier to some elements. Object is a generic 384-well or 96-well deep well plate. 1. A coating is added to the slowly moving object on the entire exposed surface except for the underside. 2. Two different in-motion 3D elements are reflected off the newly coated surface with short text explainer bullets. Elements are "protein molecules" and "acetonitrile molecules". 3. A third element is shown to be blocked from passing through the coating from the originally uncoated object. This element is a polypropylene molecule.
3D Interactive Data Visualization for website
Project Description We need to render an animated 3D Data Visualization model of our company, it’s subsidiaries and the relationship it has with our clients and strategic partners. The 3D Data Visualization asset will be used on our marketing website and electronic marketing material (e.g. PowerPoint, eBrochures etc.). 3D Data Visualization model will continue to be updated as we increase our customers and expand our strategic alliances. Whatever approach is taken, we need to make sure that the data can be updated at anytime. Underlying data used by the model can be in any format, such as a database or text file (e.g. csv). Examples of 3D Animated Data Visualization we’re interested in are best represented by these two examples: https://www.youtube.com/watch?v=JsEm-CDj4qM https://www.youtube.com/watch?v=TE9qsYBu8MM We need the visualization to be interactive where the user can select a node, which could be our company, a subsidiary, client or strategic partner and obtain more information about the organization. Images for nodes can be the company logo or static graphic. The final output must be innovative in design, appearance and functionality on a website. Data Sample: Our Company |-> Subsidiary A |-> Subsidiary B |-> Client A |->> Client A - Subsidiary A |->> Client A - Subsidiary B |->> Client A - Subsidiary C |-> Client B |->> Client B - Subsidiary A |->> Client B - Subsidiary B |-> Strategic Partner A |-> Strategic Partner B Skills: 3D Data Visualization, 3D Animation for the Web Deliverables: 3D Interactive Data Visualization for the Web and for use in other collateral. Must be multi-browser and tablet friendly.
Take my Box for a spin
Animate my attached files based on the written script attached.