Generial electric TY34 fan and nose coneBlind
in
3D Printing Design
held by
Shannon Garcia
Last seen:
2021-02-26 03:13:09
Contest Ended, Winner(s) have been selected.
Description:
I need a stl printable file for a 1/6 scale of the front fan and nose cone from the General Electric TF34 turbine motor for a project
Wants:
Just need it as the real one in 1/6 scale
File Size Limit:
3 MB - 4.9 MB
Software:
- Fusion 360
Additional Information
i need the nose cone and fan as separate printable pieces and if posable the nose cone thread on the fan if not at least two parts so i can mod to screw together.
Prepaid Prize
Entries
1st Winner
#10 GE TF34 Nose Cone and Fan with threaded hole in nose cone
by Vimalgeorge10
Download Files
- Autodesk Fusion 360 2021 — GE TF34 Nose Cone and Fan with threaded hole in nose cone
- Autodesk Fusion 360 2021 — Nose Cone 1
- Autodesk Fusion 360 2021 — Fan 1
- Adobe Acrobat Pro — GE TF34 Nose Cone and Fan with Threaded hole in Nose Cone
- Rendering Images — GE TF34 Nose Cone and Fan with threaded hole in nose cone 1.4
- Rendering Images — GE TF34 Nose Cone and Fan with threaded hole in nose cone 1.6
Dear Shannon Garcia,
Thank you for your valuable feedback...
I have submitted 1st possible modified version of the design submission (#5) to meet your new design requirements. The STL files of the components and .F3d file of the whole design are submitted. Also, a pdf containing the details of the changes made to the first design submission is submitted along with the CAD files.
With Regards,
Vimal George
Thank you for your valuable feedback...
I have submitted 1st possible modified version of the design submission (#5) to meet your new design requirements. The STL files of the components and .F3d file of the whole design are submitted. Also, a pdf containing the details of the changes made to the first design submission is submitted along with the CAD files.
With Regards,
Vimal George
Feb 24, 2021 14:50
#2 GE turbofan 34
by Prajjwal Saxena
Hi,
I had made a rough design of the turbofan with a nose cone. In this design, I had shown 2 adjacent fans with an attached nose cone along with smooth surfacing of the fan blade.
I had made a rough design of the turbofan with a nose cone. In this design, I had shown 2 adjacent fans with an attached nose cone along with smooth surfacing of the fan blade.
Feb 22, 2021 12:10
#4 Fan TF34 General Electric
by firmanp
This is model 3D fan include nose cone, thanks
Feb 23, 2021 1:50
#5 GE TF 34 fan and nose cone model
by Vimalgeorge10
Dear Shannon Garcia,
Thanks for hosting this contest.
The STL and Fusion 360 files of the design model as per your requirements are submitted.
I have got a humble request for you..... Could you please go through the pdf file which is submitted along with the cad files and the attached pdf contains the details on what bases the CAD model of GE TF34's fan and the nose cone was created.
With Regards,
Vimal George
Thanks for hosting this contest.
The STL and Fusion 360 files of the design model as per your requirements are submitted.
I have got a humble request for you..... Could you please go through the pdf file which is submitted along with the cad files and the attached pdf contains the details on what bases the CAD model of GE TF34's fan and the nose cone was created.
With Regards,
Vimal George
Feb 23, 2021 21:44
#6 Fan TF34 General Electric
by firmanp
This is the second change my model, thanks
Feb 24, 2021 0:32
#7 GE TF34 Turbine Motor
by Gerard-4815162342
Modelled GE TF34 Turbine Motor Nose and Blades using Autodesk Inventor.
Feb 24, 2021 1:27
#8 GE TF34 Turbine Motor
by Gerard-4815162342
Modelled GE TF34 Turbine Motor Nose and Fan Blades using Fusion 360
Feb 24, 2021 11:36
#9 Fan TF34 General Electric
by firmanp
This is a model that I have repaired, I made standard parts such as bolts and nuts using the Ansi metric standard, thank you
Feb 24, 2021 13:05
Discussion
what is it mounting to?
So.. just the fan and nose? I can find some but... I don't want to be rude.. because there is a guy here which posted one..
https://www.cadcrowd.com/3d-models/tf34-ge-jet-engine
https://www.cadcrowd.com/3d-models/tf34-ge-jet-engine
What level of detail would you like in the model?
Hi Shannon Garcia,
Is it possible to share a dimension drawing ? Or a link to the drawing?
Regards,
Is it possible to share a dimension drawing ? Or a link to the drawing?
Regards,
Similar Contests on Cad Crowd
6 Rendered Animations
I will provide a Navisworks 2013 NWD file that contains 6 animations that I need exporting as 1080 Avi's.
you will need to set the lighting to produce shadows and photorealistic flythroughs.
Textures will be already bound in....
You have the option to use another package as I can wire you the native DWG files, but you will need to re texturise the model...
8mm movie film reel modification
Our company is www.framediscreet.com
I'm looking to take an 8mm / super 8mm film movie reel and change the centre hub to a 16mm film core.
The centre hub will be wider then the 8mm reel. One side of the core can be flush with the reel, the other side can stick out.
Both products are commercially available and I have samples of each, they just need to be combined and printed. Fairly simple for someone who knows what they are doing.
BONUS - If you can do the 3D print.
BONUS - If you are located in Toronto, Canada or have a partner with a company in Toronto that can print the models for us to test.
rahil
fuel cell 3-d printing design using creo
Cosmetic Use
I have an idea for a makeup cleanser and I have no idea how to get it started and am a recent college graduate. Unfortunately the money is tight, but the idea is golden and I hope I can get somebody's help on starting a very successful idea line.
1:32 scale farm animals with Barn
I am looking for a product to be designed that is a toy and for children. It is a barn with show cattle. Specifically show steer, cow and calf. I would like the animals to be able to stand on their own and have their legs placed like they are in the sample pictures. Confirmation must be true to the animal.
geraldb