X-Files FBI Badge - Freelance CAD Designer Project
in
3D Printing Design
held by
Schakal1701
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
I need the X-Files Badge in 3D image2 is the design of the original Badge of X-Files,image3 is the meassurements and the original FBI Badge image is for the design of the shield!
I needed a 3D design combined with the eagle of the X-Files Badge and the shield of the original Badge and the measurements of the X-files badge.
Wants:
Color should be Gold but i think that doesnt matter because its for 3D printing with shapeways.You have to use one of the aplications providet in the Link www.shapeways.com/tutorials/supported-applications
Software:
- http://www.shapeways.com/tutorials/supported-applications
Entries
1st Winner
#26 Final Model for Concept_2
by Hiren Patel
#15 fbi15b(eye+)
by IM3D
Download Files
#28 Concept_2_without_socket_2
by Hiren Patel
#27 Concept_2_Without_Socket
by Hiren Patel
#25 Final Model for Concept_1
by Hiren Patel
#24 Concept_2_Rev_1
by Hiren Patel
#23 Concept_1_Rev_2
by Hiren Patel
#22 Concept_1_Rev_1
by Hiren Patel
#21 Two Conceptional model as per your requirement
by Hiren Patel
#20 Revision_1
by Hiren Patel
#19 Front view of the model
by Hiren Patel
Download Files
#18 FOUR VIEWS
by Hiren Patel
Download Files
#17 FBI-BADGE_2
by Hiren Patel
#16 FBI_BADGE_1
by Hiren Patel
#1 FBI - X-FILE BADGE MODEL1 IMD23
by IM3D
#14 fbi15a(eye+)
by IM3D
Download Files
#13 fbi-statue-detail
by IM3D
Download Files
#12 fbi-eagle-detail
by IM3D
Download Files
#11 fbi13
by IM3D
Download Files
#10 fbi12
by IM3D
Download Files
#9 fbi11
by IM3D
Download Files
#8 fbi10
by IM3D
Download Files
#7 badge angled view
by IM3D
Download Files
#6 badge side1
by IM3D
Download Files
#5 eagle detail
by IM3D
Download Files
#4 FBI - X-FILE BADGE MODEL1 IMD23
by IM3D
Download Files
#3 FBI - X-FILE BADGE MODEL1 IMD23
by IM3D
Download Files
#2 FBI - X-FILE BADGE MODEL1 IMD23
by IM3D
Download Files
Discussion
added a new picture from x-files where could be seen how matches the eagle with the original style fbi badge and how deep the wings go into the shield
@Hiren Patel
Maybe you could make the wings of the eagle go a little bit deeper into the shield?
As seen in image2
Greetings
Maybe you could make the wings of the eagle go a little bit deeper into the shield?
As seen in image2
Greetings
@Hiren Patel:
This looks really amazing! Go ahead! This is exactly i was looking for.
Please finish the eagle head and the justicia statue in the middle of the shield.
Great work
This looks really amazing! Go ahead! This is exactly i was looking for.
Please finish the eagle head and the justicia statue in the middle of the shield.
Great work
have a great night !
* .. i really love this, i found .. * sorry
Please tell me it's much better now :D. i really won this, i fpund it very special :X
NEW UPDATES ! Please review and feedback :)
No sorry but the eagle must be better it looks not nearly like an eagle till now
Look at the photo... There is any detayl you need
Look at the photo... There is any detayl you need
hy ! let me know if the EAGLE is done good , if the " eagle model " i tried to reproduce pleased you and then i will continue with the statue. regards
Please look for the meassurements or it will not fit into the wallets
Added more meassurements.
Added more meassurements.
i have also added a meassurement to image3
Hy!
Till now your designe looks good! I have added 2 new Side View Pictures to the contest to show you that the eagle is not so deep. it has a little oblique where the wings of the eagle hit the shield. the height should be 5 mm without the writing and the statue. If you nee to know anything else please let me know!
Till now your designe looks good! I have added 2 new Side View Pictures to the contest to show you that the eagle is not so deep. it has a little oblique where the wings of the eagle hit the shield. the height should be 5 mm without the writing and the statue. If you nee to know anything else please let me know!
HY, Schakal107 ! It is unfinished and i want to know if this is ok for know ! i have to finish the eagle and the statue from center.i'm waiting feedback wit comment from you as soon as you can, please !
What do you mean? It will be only a replica and i will use it for myself... For my x-files wallets which has actually resin badges
Just a heads up, no copyright concerns ?
Similar Contests on Cad Crowd
8mm movie film reel modification
Our company is www.framediscreet.com
I'm looking to take an 8mm / super 8mm film movie reel and change the centre hub to a 16mm film core.
The centre hub will be wider then the 8mm reel. One side of the core can be flush with the reel, the other side can stick out.
Both products are commercially available and I have samples of each, they just need to be combined and printed. Fairly simple for someone who knows what they are doing.
BONUS - If you can do the 3D print.
BONUS - If you are located in Toronto, Canada or have a partner with a company in Toronto that can print the models for us to test.
Cosmetic Use
I have an idea for a makeup cleanser and I have no idea how to get it started and am a recent college graduate. Unfortunately the money is tight, but the idea is golden and I hope I can get somebody's help on starting a very successful idea line.
rahil
fuel cell 3-d printing design using creo
Generial electric TY34 fan and nose cone
I need a stl printable file for a 1/6 scale of the front fan and nose cone from the General Electric TF34 turbine motor for a project
6 Rendered Animations
I will provide a Navisworks 2013 NWD file that contains 6 animations that I need exporting as 1080 Avi's.
you will need to set the lighting to produce shadows and photorealistic flythroughs.
Textures will be already bound in....
You have the option to use another package as I can wire you the native DWG files, but you will need to re texturise the model...
Schakal1701
Buyer