Small Animal HarnessBlind

in Product Design held by Lisa Z
Contest Closed
  • Open
  • Choosing Finalist
  • Ended
Description:
I would like to have someone draw my basic cat harness for me with my very basic logo included.
This harness should be fully adjustable with a snap buckle.
The girth should adjust from 15 inches to 25 inches and the neck should adjust from 10 inches to 20 inches ( at the minimum ). Please note that I'm not sure if these dimensions are important as far as actually drawing the harness is concerned but I've included the dimensions to be as detailed as possible.
I would like this harness to be a cloth material ( nylon ) but I would like the strip of fabric that connects the neck area to the girth area to be a leather material because I plan to personalize these harnesses. This product should be designed in black.
I would like the width of the fabric to be no more than 2.5 cm and the thickness should be about 2 mm.
The logo should be on a piece of fabric which includes two paws and the words BOBO New York.
Wants:
I included the design details and dimensions in the description box but if I missed any important details please feel free to email me and ask any specific questions that I might have missed.
Don't Wants:
I do not want any velcro closures and no bulky snap buckle.
Ask for Sample:
I would like each freelancer to finish the design as a sample so I can pick which design I like the most the complete the project.

Entries

= Buyer's Rating
#8 Small Animal Harness by Mahbub
Jul 6, 2019 11:25
#5 Small animal harness by Dev shah
Jul 1, 2019 20:48
#3 Harness-render 1 by HaSwan
Jul 1, 2019 8:51
#1 Small Animal Harness #01 by ahmadnazree
Jun 19, 2019 18:54

Discussion

HaSwan

Designer

Thu, 11 Jul 2019 02:57:40 +0000
Hi,
1. It's clearly stated in your project description: "I would like to have someone draw my basic cat harness for me with my very basic logo included."
2. You were not giving any feedback on any of my submissions (Harry S), you're not even answer on someone comment here.
3. Your accusation of multiple accounts not proven.
Thanks.

Lisa Z

Buyer

Wed, 10 Jul 2019 20:21:51 +0000
ALL 10 ENTRIES ARE NOT EVEN HARNESS'S. ITS CLEAR THAT - NO - EFFORT WAS PUT INTO THIS AND IM SUSPICIOUS THAT ONE PERSON MADE ENTRIES FROM DIFFERENT ACCOUNTS BECAUSE ITS UNBELIEVABLE TO ME THAT 7 DIFFERENT PEOPLE MADE THE SAME MISTAKE. ALL HARNESS'S HAVE THE SAME BASIC STRUCTURE. HOW IS IT POSSIBLE TO GET IT WRONG 10 TIMES!!?!?!? WAS A SIMPLE GOOGLE SEARCH EVEN MADE??! PLEASE ISSUE ME A REFUND IMMEDIATELY. WOULD NOT RECOMMEND THIS COMPANY TO ANYONE.
Mon, 01 Jul 2019 20:03:47 +0000
It's better if you can add the logo to the attachments.
Mon, 01 Jul 2019 07:34:24 +0000
I'll definitely participate!

RF_

Sat, 22 Jun 2019 08:56:29 +0000
Hi, what type of harness are you looking for, one with simple straps, a more padded "vest" type or some kind of mix between both types?
Mon, 17 Jun 2019 04:31:00 +0000
It sounds like you need a simple 3d mockup of your design. I think you would do better to hire someone on Fivver as there doesn't seem to be any engineering needed here or need for actual CAD drawings. Perhaps building your own out of existing cat harnesses and taking a picture would suit you better?

Similar Contests on Cad Crowd

Design a product = censer
To take idea about the censer https://en.wikipedia.org/wiki/Censer you can search google to see the ordinary shape of censer. Main idea: create a ( new + modern + Sleek + simple ) design for censer. I will put the inspiration for what I am looking in the next pages. I need your creativity and your sense of beauty. Here I not looking for the industrial design, I'm looking for the beauty of the external product design. your output I will give to industrial engineer to fabricated The requested out put: The original files 1. High render images for the product from different angles 2. some photos shows the parts combine and other shows the parts uncombined 3. I need also the Palette of the colors you used SEE THE ATTACHED FILE FOR FULL EXPLANATION
Firearms storage case
Hi, I need a 2D and 3D CAD design for a firearms storage case made out of a soft fabric such as canvas or ballistic nylon. My intention is to have something (drawing/rendering with dimensions) available to show a manufacturer so they understand what I want. I've attached a drawing of the case and it's dimensions. I'd like it to be padded (similar to a typical laptop case). It needs to have pouches on the outside for storage of pistol magazines, ammunition, etc. It also needs to have a shoulder strap and carry handles. The lid needs to be opened from the front of the case and "hinged" at the back. On the inside, the case should have some compartments divided by padded dividers (like a typical laptop case). I've attached some pictures of typical range bags that show examples of what I'd like. If it can have a military/law enforcement look to it it'd be great. The pouches can be Velcro or zippered closures. A dark gray color would be great for the case. Those are the basic requirements. I'll leave the rest of the design up to you. If you have any ideas to enhance it I'd appreciate it. Thank you, Carlos
Modern and innovative cat tower
We are a small start up business focusing on bringing the outdoors inside for indoor cats. Indoor cats like to climb and feel safe when selecting a preferred level to perch at. Indoor cats like their outdoor cousins, need exercise, plants (especially grass) and access to view out of windows to keep them stimulated. If the cats requirements aren't enough of a challenge then the winning design must fit seamlessly with the ultra modern home interior. We invite you to submit your designs based upon shelves fitted to the ikea stolmen post, a floating shelf design or your own unique concept. Your design may be cat centric or multi purpose for both cat and pet parent.
Photo Booth
Greetings, As a commercial photographer I was getting sick of this DIY Photo Booth market. So I've spent the past 2 years prototyping different products to combine to make a reliable product for the market. While doing this we built a company that would let our products be tested in the real world. We will be as detailed as possible, if you need any more info please send me a mail. What we are looking for: We want to build a product that is innovative, stylish, light weight, collapsable yet durable.  We want a unit that is free standing and curtain-less. I would love a stainless steel or aluminum face, but are open to other ideas. We don't want the end product to break the bank when it comes to manufacturing so would like materials to be widely available.  Height - We would like the unit to be at its tallest 70" would like it to have removable sections so height could vary. Free standing Collapsable/mobile - END GOAL would love for the entire unit to break down in to ONE 1650 Pelican Case. Simply assembly - would like this process to go quick, maybe pins/magnets/dovetails maybe power integration from base to components.  Durable - This unit will be on the go, seeing 50-60 party's a year, thats 10,000 - 50,000 potentially drunk people a year and would love to get at least 5 years from it. Stream line - think of apples clean cut designs, would love for it to feel simple, not threatening. Products: Specs Available online or upon request. HITI 510L Printer - needs side access for paper and ink, can only print on a angle of up to 30 degrees, would love for paper to come out on the front under/lower then the screen. the printer can be removable or bolted to unit. (consider break down) Windows surface tablet - needs to be accessible for touch screen, needs to be mounted flush or minimal clearance for clean design. needs access to power and usb ports from the back. Camera - standard DSLR camera. would like to have a 77mm UV filter mounted for the camera to touch up against. a dovetail plate would be great to let the camera move back and forth for different lens (up to 8" of slide) Lights - would like to place LED's and a flash tube on either side of the camera so we will need holes and diffusion plexi/plastic for this as well. we will most likely be making our own boards to mount so there aren't any specs on this yet. Adjustable angle mount - would like it if the tablet/camera/light were mounted together with a potential of up to 20 degree horizontal tilt. (consider whats behind the faceplate, don't want gaps where fingers can get caught. Additional Information We only want to produce something thats original, please see scan of idea. We want it to be a free standing structure, don't worry about backgrounds, people will stand in front of it, with the horizontal tilt the camera can adjust size. We have finalized our hardware, although we appreciate feedback, we have tested my products over the years. Looking forward to hear from you. Thank you.
Whiskey Globes
I’m looking for CAD designs of a spherical ice cube mold that depicts the world map. The mold will be produced using food grade silicone as they’ll be marketed as whiskey ice balls. The ice globes should be embossed with a world map and measure 2.5 inches in diameter including the embossment. The embossment should be raised enough so that the earth will not immediately melt away in a drink. I have attached pictures of 3D globes as well as the highest rated amazon product of its kind which is also linked below: https://www.amazon.com/Zoku-Silicone-Stackable-Easy-Release-Phthalate-Free/dp/B07CJHCCW4/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1 If I've left out any details please feel free to contact me.