Sunglasses
in
Product Design
held by
Paul
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
Hello, my name is Paul and I hope you can make a production-ready sunglasses. The surface has to be matt but You will find all the details in the word document.
Wants:
The sunglass need to be very professional but I've looked at you're work and that was really good.
Don't Wants:
I don't want a crapy 3D model.
Ask for Sample:
I would like an example so I can check if everything is good.
Software:
- SolidWorks (2014)
- SolidWorks (2013)
- SolidWorks (2012)
Additional Information
The work that you designers profide is really good and I hope you can make this sunglasses the same!!!If any other type of software is prefered please send me a mail.
Entries
#3 sunglass black
by sendil kumar
Download Files
- SolidWorks 2012 — sunglasslegleft hand2 red
- SolidWorks 2012 — sunglass red
- SolidWorks 2012 — sunglasslegright hand2 black
- SolidWorks 2012 — sunglasslegright hand2 blue
- SolidWorks 2012 — sunglasslegright hand2 green
- SolidWorks 2012 — sunglasslegleft hand2 red
- SolidWorks 2012 — sunglass
- SolidWorks 2012 — sunglass1
- SolidWorks 2012 — sunglass2
- SolidWorks 2012 — sunglasslegleft hand1
- SolidWorks 2012 — sunglasslegleft hand2
- SolidWorks 2012 — sunglasslegright hand1
- SolidWorks 2012 — sunglasslegright hand2
- SolidWorks 2012 — sunglass screw
- SolidWorks 2012 — nut sunglass
- SolidWorks 2012 — sunglass black
- SolidWorks 2012 — sunglass blue
- SolidWorks 2012 — sunglass green
- SolidWorks 2012 — sunglass2 black
- SolidWorks 2012 — sunglass2 blue
- SolidWorks 2012 — sunglass2 green
- SolidWorks 2012 — sunglass2 red
- SolidWorks 2012 — Assem4 sunglass2 red
- SolidWorks 2012 — sunglasslegleft hand2 green
- SolidWorks 2012 — Assem1 sunglass1 black
- SolidWorks 2012 — Assem3 sunglass1 green
- SolidWorks 2012 — Assem4 sunglass1 red
- SolidWorks 2012 — Assem6 sunglass1 blue
- SolidWorks 2012 — Assem1 sunglass2 green
- SolidWorks 2012 — Assem2 sunglass2 black
- SolidWorks 2012 — Assem2 sunglass2 blue
- SolidWorks 2012 — sunglass black
- SolidWorks 2012 — sunglass blue
- SolidWorks 2012 — sunglass red
- SolidWorks 2012 — sunglasslegleft hand1
- SolidWorks 2012 — sunglasslegleft hand2 blue
- SolidWorks 2012 — sunglasslegleft hand2 black
- SolidWorks 2012 — sunglass
- SolidWorks 2012 — sunglasslegleft hand1 red
- SolidWorks 2012 — sunglasslegleft hand1 blue
- SolidWorks 2012 — sunglasslegleft hand1 black
- SolidWorks 2012 — sunglassleg
- SolidWorks 2012 — sunglassleg red
- SolidWorks 2012 — sunglassleg blue
- SolidWorks 2012 — sunglassleg black
Apr 25, 2014 11:19
Discussion
No I prefer solidworks autocad or maya.
Thu, 01 May 2014 01:44:28 +0000
Could I use NX unigraphics?
Mon, 28 Apr 2014 07:12:07 +0000
do you intend to close this contest early \?
Buyer
thats ole but I'll first have to download software to open it but I think it will be ole.
Mon, 21 Apr 2014 15:44:41 +0000
how if we provide you example via 3D pdf?
Buyer
Solidwork 10 will also do the job so yes!!
Mon, 21 Apr 2014 14:55:52 +0000
how about Inventor or Solidwork 2010,Paul?
Buyer
Catia V5 is also good
Similar Contests on Cad Crowd
Titanium Nails Design
We are Resinbees, a smoking accessories company based in Montreal ,Quebec Canada.We are looking to design a new nail.
The nail is to be placed at the****of a glass pipe and the tip heated with a butane torch till its red hot.We will send the design to be manufacture (Milling Machine) so please be as detailed as possible.Feel free to ask some questions if you need more information.
Design a product = censer
To take idea about the censer
https://en.wikipedia.org/wiki/Censer
you can search google to see the ordinary shape of censer.
Main idea:
create a ( new + modern + Sleek + simple ) design for censer.
I will put the inspiration for what I am looking in the next pages.
I need your creativity and your sense of beauty.
Here I not looking for the industrial design, I'm looking for the beauty of the external product design. your output I will give to industrial engineer to fabricated
The requested out put:
The original files
1. High render images for the product from different angles
2. some photos shows the parts combine and other shows the parts uncombined
3. I need also the Palette of the colors you used
SEE THE ATTACHED FILE FOR FULL EXPLANATION
Firearms storage case
Hi,
I need a 2D and 3D CAD design for a firearms storage case made out of a soft fabric such as canvas or ballistic nylon.
My intention is to have something (drawing/rendering with dimensions) available to show a manufacturer so they understand what I want.
I've attached a drawing of the case and it's dimensions. I'd like it to be padded (similar to a typical laptop case). It needs to have pouches on the outside for storage of pistol magazines, ammunition, etc.
It also needs to have a shoulder strap and carry handles.
The lid needs to be opened from the front of the case and "hinged" at the back.
On the inside, the case should have some compartments divided by padded dividers (like a typical laptop case).
I've attached some pictures of typical range bags that show examples of what I'd like.
If it can have a military/law enforcement look to it it'd be great.
The pouches can be Velcro or zippered closures.
A dark gray color would be great for the case.
Those are the basic requirements. I'll leave the rest of the design up to you. If you have any ideas to enhance it I'd appreciate it.
Thank you,
Carlos
Small Animal Harness
I would like to have someone draw my basic cat harness for me with my very basic logo included.
This harness should be fully adjustable with a snap buckle.
The girth should adjust from 15 inches to 25 inches and the neck should adjust from 10 inches to 20 inches ( at the minimum ). Please note that I'm not sure if these dimensions are important as far as actually drawing the harness is concerned but I've included the dimensions to be as detailed as possible.
I would like this harness to be a cloth material ( nylon ) but I would like the strip of fabric that connects the neck area to the girth area to be a leather material because I plan to personalize these harnesses. This product should be designed in black.
I would like the width of the fabric to be no more than 2.5 cm and the thickness should be about 2 mm.
The logo should be on a piece of fabric which includes two paws and the words BOBO New York.
3D Product Design for Lipgloss/Lipstick Component
I need a 3d product design for a lipstick and lipgloss component that i am having made custom so i need a 3d concept design for the manufacturers to make the mold for this packaging. The shape of the component will resemble a crystal and very geometric. I will attach a photo of what i envision but just in 3d. Also the technology of the component is a push button pop up style, with a spring on the inside im assuming to have it released out and also clicked back in. Chanel's allure lipgloss/lipstick technology is exactly what im looking for.
This is generally everything that i am looking for but feel free to be creative and go above and beyond in terms of the shape. Anything geometric and edgy looking i would love. I want this lipstick/lipgloss packaging to be very cutting edgy and modern. Very out there in style and eye catching.
Just a rough concept design of the exterior shapes.
I want a 3d design that you are able to spin and rotate around to see all edges and shape of it because the design i want will not be uniform all around.
Thank you. Have fun with designing!
Paul
Buyer