New Pizza SlicerBlind

in Homeware Design held by Bruce Gordon2
Contest Ended, Winner(s) have been selected.
Description:
we have created a new pizza slicer. This is a base wood board like a bread board with aa attached wire frame slicer which will cut the pizza into 8 slices like a cheese slicer.

I attach a drawing of the product and require a realistic picture of the product which we can use to do some further market research to receive comments on the product and registration for future information on the product when launched.

This is a very small project which should require no more that 2 hours drawing.


Hopefully there will be further projects as the product is fianlised and produced.
Wants:
Realistic picture of the product which can be shown to potential customers to obtain feedback
Don't Wants:
I don't need a complete set of drawings just a single representation. this can then be refined and more detaied drawings competed after the next round of market testing.
Ask for Sample:
only require once realistic picture for Market research purposes.
Software:
  1. na - As only need a soft copy of the product pictures

Entries

1st Winner
#5 Pizza Slicer by ahmadnazree
Hi, please find the attached model and the rendering for your idea. I will submit a more realistic rendering if given the chance. Thank you very much
more
Mar 27, 2019 6:19
#1 Pizza Cutter by Jim81
Mar 26, 2019 20:49
#3 Pizza Cutter by Byonyx
This design of the pizza cutter is to the correct scale with proper offsets for the blades to fit into the wood and for the outer ring and hinge to clear the wooden base. This is an easily editable design broken into separate layers. Please reach out If you have any questions.
Best Regards,
Kris
more
Mar 27, 2019 1:17
#4 Pizza slicer by jreyesza
Pizza slicer
more
Mar 27, 2019 2:50
#6 Pizza Cutter by HARUTYUNYANS
Mar 27, 2019 8:00
#7 Pizza Cutter by Nishanth P
A 1:1 scale model. The model is very easy to assemble.
more
Mar 27, 2019 10:44
#8 New Pizza Slicer by kesiganparam
Hey Bruce!
Love the idea and please find attached my 3D rendered output for your New Pizza Slicer design. The dimensions follow those stated in your attachment and the design does not clash, with the hinge being able to close with no obstruction and the blades fitting perfectly into the slits on the board.
Good Luck, and I hope to work with you in the future.
KC
more
Mar 27, 2019 11:42
#10 cutter design by Adriano Ordoz Barissa
Simple and easy to manufacture product.
Wooden base with welded stainless steel hinge. The top ring is also made of stainless steel with fixed knives.
I used a wooden handle, the same one used at the base.
more
Mar 27, 2019 12:52
#11 16" Pizza Slicer by Chris Brennan
Initial concept of pizza slicer based on provided sketch.
more
Mar 27, 2019 14:30
#12 Pizza Slicer by AryaPratopo
in the file that I sent, I included a soft file with step format and jpg results from my rendering, if you need improvements or even you like my original design, thank you for the opportunity
more
Mar 27, 2019 16:41
#13 pizza slicer by AryaPratopo
in the file that I sent, I included a soft file with step format and jpg results from my rendering, if you need improvements or even you like my original design, thank you for the opportunity
more
Mar 27, 2019 16:45
#15 Pizza Slicer by Faizan Raza
Dear Bruce,
The design is basic and can be modify upon request,
Looking forward to hear from you.
Thank you.
more
Mar 27, 2019 18:32
#16 PIZZA SLICE CUTTER by Parth Hingu
I have submitted preliminary design as asked.
Attached pictures are self explanatory as the design is quite simple.
If required, we can design the part with replaceable/ interchangeable blades as well.
more
Mar 27, 2019 18:36
#17 Pizza slicer by Fadi Sayegh
Hi sir,
Please find the attachment drawings.
Kind regaeds
more
Mar 27, 2019 18:55
#18 Pizza Cutter by RS2018
Detachable cutter for easy cleaning.
more
Mar 27, 2019 20:42
#19 Pizza slicer by Fadi Sayegh
Hi sir,
Please find the attachment drawings with some edits on the previous one.
Kind regards
more
Mar 27, 2019 21:51
#26 Pizza Cutter Rendering by Don T
Thank you for the opportunity to submit this rendering.
more
Mar 28, 2019 12:07
#27 Slice Master 3000 by Fred Flintstone
Hello Bruce,
this is my slicer design. The center area of your sketch would create several problems (stability, production, slicing), so I altered it a little. Production of this design is quite easy and cheap, and you'd get a unique slice pattern.
more
Mar 28, 2019 13:11
#28 new pizza slider #dt by Davidtm
Hello, I am sending a .RAR folder with rendered images and animations. I added a "seat" around the wooden base for the steel ring. The hinges are welded and bolted. All dimensions are set according to your specifications, with some comments I can quickly modify the rendered images or any detail you want.
Best regards
more
Mar 28, 2019 13:31
#34 Pizza slicer by Kumudu
Pizza slicer with wooden cutting board, slicer blade frame with wooden base and a handle.
more
Mar 28, 2019 21:43
#35 Pizza Cutter.jpg by Don T
Thank you for the opportunity to create this rendering. 3d files are available for multiple platforms if requested.
more
Mar 29, 2019 1:48
#36 pizza by uumarfarooq
Mar 29, 2019 3:10
#37 designs 2 and 3 by Davidtm
Hello bruce I am sending some additional images for design 1 (same as for entry # 28), a design with cables instead of blades (design 2) and a last one with cables and a steel structure to stabilize them (design 3) ). I hope you like these representations of your idea. If necessary, I can send different angles or environments for any of the designs.
Best regards
more
Mar 29, 2019 5:03
#38 Dahlia75 by Peter Abramoff
Check this out. I believe this will do the trick for market research purposes. Let me know if you have any comments or feedback. Thank you!
more
Mar 29, 2019 5:20
#40 pizza slicer by tambat
this model comprise of ring fitted cutters .
the parallel hinge allows the straight horizontal movement of the blades to cut pizza.
the hinge between wooden base and hinge block allows 90 degree movement of cutter to open slicer.
there is central button about 60 mm dia to press the cutter on pizza to impose uniform pressure to slice pizza.
parts in white cullour are in stainless steel.
please massage if any query.
more
Mar 29, 2019 6:39
#41 Pizza Slicer by Iram
Hi I hope you like the design, it can be modified upon request if you need more information don't doubt contacting me
Thanks in advance
Iram
more
Mar 29, 2019 6:44
#42 New Pizza Slicer with Wire-Frame Blades by kesiganparam
Hi Bruce,
Just following up my previous submission that used solid 1/2" blades with one that now uses 1/2" wire-frame blades. I've also included a little surprise which I think you may find useful to attract potential customers for this product.
Hoping my design meets your requirements, and I'm always open to feedback or any modifications you may require.
KC
more
Mar 29, 2019 13:09
#44 Pizza Slicer by Mahbub
Please take the rendering images. Thanks
more
Mar 29, 2019 17:15
#47 Pizza Slicer 12 by RRM
Mar 29, 2019 17:25
#50 Hi Resolution Upload by ahmadnazree
Hi, please find the high resolution render for your use. Thank you very much.
more
Mar 31, 2019 16:01

Discussion

Thu, 28 Mar 2019 14:05:10 +0000
It won't work effectively in your current configuration. Your design relies on crushing vs slicing and the handle configuration won't generate the force required to cleanly slice thru. it can be done but not as presently configured

Davidtm

Designer

Thu, 28 Mar 2019 13:41:07 +0000
Hello Bruce, i sent a model with blades instead of wires becouse that is the instruction on the drawings you attached(1/2" metal blades), and just to check i tried to cut a slice of pizza with a cheese cutter and did not work very well. Anyway if you want to i can quickly modify the design and change blades for wires. This design is very easy to make and low cost

Davidtm

Designer

Thu, 28 Mar 2019 13:40:22 +0000
Hello Bruce, i sent a model with blades instead of wires becouse that is the instruction on the drawings you attached(1/2" metal blades), and just to check i tried to cut a slice of pizza with a cheese cutter and did not work very well. Anyway if you want to i can quickly modify the design () and change blades for wires. This design is very easy to make and low cost

Ricky3DVFX

Designer

Thu, 28 Mar 2019 11:24:09 +0000
Hey Bruce, Feedback Please

Davidtm

Designer

Wed, 27 Mar 2019 13:25:13 +0000
hello, on the description you say a wire frame slicer, but on the drawings you say 1/2 inch metal blades, can you please explain a little bit more? thanks a lot
Tue, 26 Mar 2019 21:46:02 +0000
OK, if it take you 2 hours, why making a contest?

Similar Contests on Cad Crowd

Mompreneur needs 3D Drawings to rid the world of boring highchairs!
Our mission is to rid the world of boring highchairs & messy cleanups, one meal at a time! I need 3D drawings of two different styles of placemats that will custom fit the world’s most popular high chair – the IKEA Antilop high chair. They’ll be made from silicone FDA approved food-grade silicone. The drawings will assist with create product moulds in China. See attached file for dimensions - although I'd prefer to work with someone who has this exact high chair in their home (as it's difficult to communicate dimensions of edges and corners). Would also like to letterpress logo into design (see attached for example).
3D Printer Design
We are an early stage 3D printing startup looking for a concept to use in our pitch deck. There will likely be continued work opportunities with the winner. ------------------------------------------------------------------------------------------ Style: Sleek and minimalistic. No screen, just a power button. You can go for an ultra-modern design (apple) or a retro-futuristic 50's design (Jetson's TV show). Use the color scheme in the attached company logo. ------------------------------------------------------------------------------------------ Dimensions: **Print area must be 300mm wide by 200mm deep by 200 mm tall. **There needs to be an extra .02 cubic meters of room for electronics and other components either beneath the print area or behind it. -------------------------------------------------------------------------------------------- Other: **The front, right, and left sides should be all or mostly gray acrylic glass. Everything else should be solid. (leave the top 70mm solid to hide the extruder and motors) **Modeling motors and extruder is not necessary! **The print bed must move up and down so it needs one screw and two guiding rods behind it. (see attached picture) **Include the company logo somewhere on the printer.
Kitchen Waste Rack
Purpose is to make this an injection molded plastic item. Looking to get some CAD designs that include the core structures, which are: (a) precise top loop [that holds a slightly stretched plastic garbage bag], loop cutout is preferred, but optional if necessary. Loop Circumference: 28.5 inches. Can be irregular shape.; (b) bottom holder to support bag contents and hold roll of bags with some dispensing assistance to keep roll in center; and (c) a vertical component to maintain the precise distance from top and bottom components. Height 15.25 Inches; (d) two side hooks that hold a shopping bag in lieu of fitted bag. - The top and bottom can have individual mounting via 3-4 mm screws. - The unit would be best as a 2-3 piece construction for smaller shipping /retail box. - item must support appx 15 lbs distributed through top ring and bottom support. - reference www.extrufix.com for info and watch installation video for product views. - My sketches of a potential design are attached: "Sketch_1" and "Sketch_2". This is provided as an example only. - current, actual retail product designs attached: 2 wire plans and 1 retail package artwork. Other current product images and drawings are attached. Note: our company is interested in selling garbage bags that fit the rack. This is the critical mission. The shopping bag hooks are a minor feature that we include for a minority of our users.
Ice Pack Designs
Need unique designs in various sizes for ice packs. Small – .75lbs – 4.25″ x 6.25″ x 1.25″ Medium – 1.5lbs – 6.75″ x 7.75″ x 1.25″ Large – 2.5lbs – 7.5″ x 9.5″ x 1.25″ Extra Large – 5lbs – 10.925″ x 8.661″ x 1.85″
water heater adapter design
HI Goutam , our product is water heater geyser adapter , which can attach together with existing/new water heater geyser . our new adapter will have water pump , hot and cold water mixing valve, pcb with digital display etc.