Achilles
in
3D Modeling Design
held by
Achilles
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
Create a new Innovative and High-Tech Design for a Seated Calf Raise Machine. (Gym equipment)
Wants:
• Futuristic Design• Heavy duty Commercial grade construction
• Seated Calf machine must be able to handle up to 600 Pounds
• Plate loaded (Olympic weight plates)
• Plate Capacity 6-45 lb plates per weight rod
• Angled handles for user comfort during exercise
• Pull-pin thigh pad adjustment to accommodate different size users
• Machine design emphasizes the Soleus calf muscle
• Ergonomic design Rubber Foot pads (Prevent Sliding)
• Comfortable thigh pads while using heavy weight
• Weight release lever
Don't Wants:
I do not want copies of designs that are already on the market
Company Logo:
Yes
Software:
- Autodesk Inventor, Solid Edge, Pro-E, Catia, Solid Works
Additional Information
This video provides an example of how a Seated Calf machine works:www.youtube.com/watch
Wants:
• All Designs will be 3D Solid Models
• Units: Inches
• Unilateral design: meaning each calf will work independently.
• Designs will be judged by:
Uniqueness
High-tech design
Functionality
Comfort
Software that can be used:
• Autodesk Inventor
• AutoCAD
• Solid Works
• Solid Edge
• Pro-E
• Catia
• Autodesk Fusion 360
• Unigraphics
File submissions:
• 3D CAD file
• 3D Step
• Engineering Cad Drawings
• Rendered JPG image
Prepaid PrizeEntries
Discussion
Designers, The seated Calf raise machine design should have a Unilateral design: meaning each leg will have it's own thigh pad and weight stack.
Can you tell us approximately your desired overhall size? Thanks
Hi dear buyer, please do not end the contest earlier than the date like i saw on other contest, its really bad To work for nothing at all, work in progrèss! Thanks, best regards. JJ
Hi everyone,
Please note that submitting entries just with the logo, blank images or a very small part of the product isn't allowed and all the entries which doesn't follow the rules will be deleted.
If you are worried about the confidentiality or plagiarism by other users, you can ask Achilles to make the contest blind. Otherwise, even if the contest is not blind, you still need to upload visible designs/screenshots of the entire product.
So @sherifelsheikh, @Pablo Gosso, @NabilZer, @Fedenko, @Akuma X, @Steven INA : please re-submit your entries with a visible screenshot.
Lucian
P.S. There is no need to answer to my comment here, to avoid off-topic messages. Just send me a message if you will have any questions.
Please note that submitting entries just with the logo, blank images or a very small part of the product isn't allowed and all the entries which doesn't follow the rules will be deleted.
If you are worried about the confidentiality or plagiarism by other users, you can ask Achilles to make the contest blind. Otherwise, even if the contest is not blind, you still need to upload visible designs/screenshots of the entire product.
So @sherifelsheikh, @Pablo Gosso, @NabilZer, @Fedenko, @Akuma X, @Steven INA : please re-submit your entries with a visible screenshot.
Lucian
P.S. There is no need to answer to my comment here, to avoid off-topic messages. Just send me a message if you will have any questions.
intresting contest ,i'll submit my design ASAP
Designers, The seated Calf raise machine design should have a Unilateral weight arm design: meaning there will be 2 weight arms and each arm will work independently.
Designers, The seated Calf raise machine design should have a Unilateral design: meaning there will be 2 independent weight arms. Each leg will have it's own thigh pad and work independently.
Can I use Unigraphics NX?
You are correct. The seated calf raise machine should haves two different arms, with two rotation points and two different Weights stocks.
Hello sir, interesting contest! With thé unilatéral design if i understand, any of this design are good ? U want something new wé canot see on ur example, it means there is two différent arm with two rotation point and two différent Weights stocks ? Thanks
Designers, The seated Calf raise machine design should have a Unilateral design: meaning each leg will have it's own thigh pad and work independently.
Should the seat be fixed as shown on the video or movable as in the attached pictures?
Designers, you may use Autodesk Fusion 360
is it only for product design, not mechanical design? I mean not need stress analysis and simulation.
can i use Autodesk Fusion 360?
can i use Autodesk Fusion 360?
Please make the contest blind so we cannot see each others works.
That way you will have more original ideas rather than variations of one product.
That way you will have more original ideas rather than variations of one product.
800$? how important is this project for you? would you like to start a production?
If what you are looking for is a great product and not a concept design, you can hardly get something like that with such a low price.
A complex job like this takes a long time and requires many skills.
Please let us know what your intentions are. Thanks
If what you are looking for is a great product and not a concept design, you can hardly get something like that with such a low price.
A complex job like this takes a long time and requires many skills.
Please let us know what your intentions are. Thanks
Designers, The seated Calf raise machine design should have a Unilateral design: meaning each leg will have it's own thigh pad and weight stack.
I have also attached an AutoCAD file of the Achilles logo, which should be placed on the seated calf raise machine.
Designers, there are quite a few seated calf raise machines on the market. I want a design that is totally different but still has the strength to handle up to 600 pounds.
I have attached images of various types of seated calf raise machines. These are just go-byes of what a seated calf raise machine looks like.
I have attached images of various types of seated calf raise machines. These are just go-byes of what a seated calf raise machine looks like.
Similar Contests on Cad Crowd
PCB Design
Design PCB from BOM and board dimensions. Circuit design should resemble photos.
Provide all files necessary to manufacture PCB. Schematic, Gerber, etc.
motorcycle build
im currently modeling a motorcycle in 3ds max and looking for someone to work with to finish the project.
iPod / iPhone Case with integrated right angle lens.
Design and prototype an iPhone and iPod touch case that incorporates a right angle lens and 2x zoom lens. Also maybe model a cavity for extra battery pack if possible. A laser pointer would be a bonus.
I realize the components will result in a somewhat bulky design. I am ok with that.
Also, not sure how to budget here. Putting 1000 to start.
Euler Motors
Govt. of India has introduced new category of Vehicle - E Rickshaw last year primarily to uplift the working condition of rickshaw-pullers (from an otherwise physically taxing mode of commute, rickshaw pullers and drivers now have an easier and greener alternative.) E Rickshaw comes in two variant - Passenger Vehicle and Goods Carrier. Euler Motors is working on 3 Wheeler Electric Good Carrier variant for Indian Market - Tier 3/4 Markets { Villages, Small Townships }.
Here is specification according to government :-
1. Top Speed = 25 Km/H
2. Load Capacity = 310 Kgs
3. Length x Width x Height = 2.8 m x 1 m x 1.8 m . (Dimensions are in Meters)
Here are some of the existing version of E Rickshaw Goods Carrier :-
https://goo.gl/kTx6ho
https://goo.gl/vWCgjm
https://goo.gl/wFLdQZ
https://goo.gl/SSYsfy
https://goo.gl/3FTk7n
https://goo.gl/p2xjS3
Salient Features That Euler Motors is working on :-
4.3” Inch Digital Display { Link = https://goo.gl/5EJFuw } instead of Regular Dial based display { Link = https://goo.gl/CpC4fv }. This display will display stats around Speed, Battery Left, Temp., Headlights, Indicator
Reverse Backup Camera : To enhance Safety of the vehicle and driver, a reverse backup camera will be attached to the rear - centre of the vehicle. Display from camera would appear on the 4.3” Digital display when vehicle reverses.
Li Ion Battery will be placed in front of the vehicle {below the driver’s seat}. However the structure should be made in a way that the battery can taken out from enclosure within 2 minutes if required. Entire battery back will consist of 2 modules. Each module will be of following dimensions
Each Module’s Weight = 12 Kgs
Each Module’s size : Length x Width x Height = 220 mm x 210 mm x 355 mm
2 Modules can be arranged along the width of vehicle or height in the battery pack.
Required Items inside the Vehicle:-
Li Ion Charging Spot needs to be on the vehicle installed.
Vehicle needs to include
First Aid Box
Mini Fire Extinguisher
Vehicle Charging Point needs to be on vehicle { https://goo.gl/Ngp8KZ , https://goo.gl/5p7buC }
Standard vehicle parts - Front head light {LED headlight}, Front Indicator, Tail Lights, Rear Indicator, brake pedal.
Accelerator in the conventional 3 wheeler are along the handle.
Building of 3D models using parametric
Hi,
We need to develop 3D models using the parametric method. 3D models in fashion accessories.
Achilles
Buyer