Structure Rendering 1000Blind

in 3D Modeling Design held by Airemos
Contest Ended, Winner(s) have been selected.
Description:
Hello and thank you for viewing our project,
We need a scaled, hi resolution, photo realistic renderings of our three structures which are different sizes. We need a working model which will allow each component to be manipulated for color, material or surface printing. Each structure and components will be $300 for first place. There will be 3 projects total.
Wants:
We need each component to be individual so we may manipulate as needed.
Structures = 3x Sizes (10'x10', 12'x12' and 20'x20')
Components = Frame - Roof - Side panels (4x panels total)
File format = Any file format that can be used extracted into Trimble Sketchup OR Adobe Dimensions.
Material composition = Frame and Panel material to match actual (photo match)
Don't Wants:
We do not need an image file.
Ask for Sample:
Please submit a sample of one of the structures for consideration.
Software:
  1. Adobe Dimensions (Dimension)

Entries

1st Winner
#15 1000 1200 2000 by unocuatro
Regards, waiting for your feedback.
more
May 3, 2018 20:51
#12 SUBMISSION#2 by Narasimha Chary
Please find .dae files and .obj files in zip files for opening the model in SketchUp and Adobe Dimensions respectively.
Thank you.
more
Apr 28, 2018 16:20
#9 Structure Rendering by Mahbub
Please check sample of my designed similar structure. If you're interested then I will do your structure. Thanks
more
Apr 26, 2018 4:16
#14 1000 by unocuatro
Regards,
I have managed to convert files to .dae and .obj, I hope these are useful. Let me know, thank you.
more
Apr 30, 2018 0:24
#6 tent structure by SW Cad
Apr 22, 2018 10:39
#4 Endeavor v1 by Milan Borovic
Please find attached the renderings and zipped adobe dimension file for your review.
Any feedback is welcome.
more
Apr 22, 2018 10:10
#1 For Project: Structure Rendering 1000 by Akuma X
Kindly review the attached Adobe Dimension file.
Thank you.
more
Apr 19, 2018 12:14
#5 tent by SW Cad
STL file upon request
more
Apr 22, 2018 10:25
#7 sketchup file by SW Cad
Apr 22, 2018 11:27
#3 Simple modelling - All 3 sizes by Decker
See attached for your modelling request. Good luck in finding what you need. Any questions please ask.
more
Apr 21, 2018 15:33
#10 Structure Rendering -Said Cad by Said cad
You find attached my proposal
The model is in standard format of 3D (.stp)you can use it under sketch Up or adobe dimension.I'm waiting for your comments to modify the model.
more
Apr 27, 2018 17:45
#8 For Project: Structure Rendering 1000 by Akuma X
Kindly Rate. Thanks!
more
Apr 24, 2018 11:35
#11 ENDEAVOR 1000 STL by helghast
Created in Solidworks then converted to STL for Sketchup.
more
Apr 28, 2018 1:46
#16 10´x10' by Ayham Bitar
i´m ready for any modification
more
May 8, 2018 0:21
#17 1200 by unocuatro
Regards, please contact me if there is any modification to do.
more
May 9, 2018 20:38

Discussion

Narasimha Chary

Designer

Fri, 20 Apr 2018 18:42:49 +0000
Hello Ryan,
I am working to make a better model than my 1st sample submission. Before that, let me just know whether the .dae files that I submitted are properly getting imported into the Abode Dimensions or I have to change the format?
Regards.

Airemos

Buyer

Thu, 19 Apr 2018 11:32:06 +0000
Hello Milan,
We need 3d model which look as close as possible to our product from the pictures, so we can play with colors and materials. We will be using adobe dimensions to place client logos and colors on the 3D model.
This is NOT for manufacturing purposes.
We do not need "renderings" of our product. We need a 3D model that we can render from.

Thank you for you interest.
-Airemos

Milan Borovic

Designer

Thu, 19 Apr 2018 10:06:43 +0000
Hi Airemos,
Do you need only 3d model or you need renderings also, because you stated you dont need image files.
Also, do you need 3d model which look as close as possible to your product from the pictures, so you can play with colors and materials? Or you need product ready for manufacturing with all bits and pieces?

Airemos

Buyer

Wed, 18 Apr 2018 13:34:01 +0000
Hi Narasimha,
These formats will be perfect. They will both import to SketchUp.
Please let me know if you have any questions about the model itself.
The dimension of the structure are;
10'x10'x8.5' (LxWxH)
The beam diameter is 11"
The frame material is; Sailcloth https://www.sailrite.com/Insignia-Adhesive-Backed-Black-54
The Roof and Side panel material is woven polyester
For more pictures of the structure for reference you can check out www.airemos.com. It's the Endeavor 1000 with the A-Frame beams.
Thank you very much,
-Ryan

Narasimha Chary

Designer

Wed, 18 Apr 2018 11:18:27 +0000
Hi
Can I submit the model in .dae format or .3ds format ? please check and inform whether they can be imported into Sketchup.
Thank you.

Similar Contests on Cad Crowd

Headphone Redesign
We want to upgrade the design and shape of our Ultra Light Headphone. We would like to keep the dimensions and weight of the headphone including ear cups similar to the existing one. Type: Ultra Light wired headphone Target Audience: Students in classroom Material: ABS Plastic ensuring maximum durability. Chew resistant fabric cable to prevent damage from toughest chewers Please find attachments for existing design and dimensions. Headphone specifications for your reference: Specifications: – Driver Unit: 40mm – Power Handling Capacity: 100mW – Frequency Response: 20-20000Hz – Impedance: 32ohs – Sensitivity: 105FB+/-3dB – Cord Length: 1.5m – Cord Material: Braided fabric – Plug: 3.5mm stereo – Warranty: 1 year Any further questions, please feel free to comment.
Simple Re-design of Front Cover Housing
We are looking to redesign the front cover only of our housing. The cover should keep the same dimensions so it still snaps into and works with the back housing. The back housing will be an industrial white. The front housing will be clear. See the sketch concept (MRX design version 2 - Setra file) file to see what we are moving to. We want to move away from the curved look of the front cover in favor of a flat face with a bezel (see the BAPI product for inspiration). The sticker label will have a rectangle cutout where a new, larger backlit display will be featured. The sticker will have a slight industrial texture to it. Please note we are considering adding a blue LED inside the housing to illuminate the clear edges of the front cover housing. Please try to mockup up the product with and without a blue light glow. Please also have a backlight effect on the display. All entries should be on a white or transparent background. Attached are current CAD files. Note the front cover will now have a flat face, the back housing will not change except for the color which will be safety/industrial white. Also attached are images of our current product (the MRX) and competitor products. We like the BAPI design the best. One final note, we also wanted to change the locking hinge to have more of a rounded shape instead of the squared shape. We also want to add a small hole in the latch (and a new hole in the back housing) for a small cotter key type lock or set screw. Thanks and I am happy to provide clarification.
Design a gas powered compact weapon
This gadget is for arm to arm combat, for military use. It is a Carbon Dioxide powered punching tool that will dispense its gas load into the recipient of the punch. James Bond would have one of these discreetly hidden for any unexpected fight :) The 25 gram CO2 gas canister is housed in a metal sleeve that is held in the palm of the hand, there is a hollow blade that protrudes out between the middle fingers that dispenses the gas. The finish can be stainless steel, aluminum, cold steel, anything that looks good. The arrow head is interchangeable. The canister is pierced by a hollow pin on the top of the inside vessel. If this could be 3D printed that would be great.
Brush Cleaner
I would like a electric brush cleaner which has a base that fits into the palm of your hand and multiple detachable head pieces. Must be either rechargeable or battery operated. Base: - approx. 3 inches in width - has mechanics to rotate head piece both ways - possible liquid containing compartment that can dispense foam cleanser through head piece - strap that secures base to palm of hand Head: - approx. 3inches in width - Flat top with a short lip to retain liquid - Should have various sized bumps to help with cleansing brush head - can attach securely to base Similar construction to a clarisonic skin cleaner, but without the handle. Please see attached images
Can crusher design ( will pay)
Hello I am a student in need of serious help with a can crusher design will pay and need it done right away