EVO mantrap

in 3D Modeling Design held by grantanator
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
This is a male chastity device
Cage size
S – A= 42mm B=28mm C=8mm Oval shape*
M – A= 62mm B = 33mm C=10mm Oval shape*
L – A= 92mm B = 35mm C=12mm Oval shape*
XL – A = 110mm B = 39mm C=13mm Oval shape*
XXL – A = 112mm B = 44mm C=15mm Oval shape*

Total cage length
S: 60mm
M: 80mm
L: 110mm
xL: 128mm
xxL: 135mm

Base Ring sizes
40mm
45mm
50mm
55mm
Wants:
Copy and change the design of competitive produce see photos
Software:
  1. format of STP or IGS
Additional Information
Please see the attachments..... the lock mechanism shown on the red devices is great, because it is only 2 piece construction making production cheaper, but we like contoured design of the base ring on the black one, would like to make one design out of the two styles mainly changing design enough to make the entire thing look unique, so you can design it any way you want, we encourage your creativity....Hence we are copying an existing product. please submit design in one size.....we can scale the different sizes later, the finished product will be made out of plastic.
The winner will have the opportunity to draw all of the other sizes and earn extra money from this project.

Entries

= Buyer's Rating
1st Winner
#8 EVO CHASTITY DEVICE 7.1 UPDATE by 25ART
Jun 2, 2016 15:25
#1 EVO CHASTITY DEVICE 1 by 25ART
May 31, 2016 17:02
#2 EVO CHASTITY DEVICE by 25ART
Jun 1, 2016 1:43
#3 EVO CHASTITY DEVICE 3 by 25ART
Jun 1, 2016 6:47
#4 EVO CHASTITY DEVICE 4 by 25ART
Jun 1, 2016 6:50
#5 EVO CHASTITY DEVICE 5 by 25ART
Jun 2, 2016 6:45
#6 EVO CHASTITY DEVICE 6 by 25ART
Jun 2, 2016 6:54
#7 EVO CHASTITY DEVICE 7 by 25ART
Jun 2, 2016 7:35

Discussion

25ART

Designer

Wed, 01 Jun 2016 15:59:09 +0000
Hi grantanator,
Yes, of course can. Will do after new submission.

grantanator

Buyer

Wed, 01 Jun 2016 15:26:11 +0000
try to make on that is just 2 pieces it will be cheaper to reproduce

25ART

Designer

Wed, 01 Jun 2016 06:58:30 +0000
Hi grantanator,
Thanks for ur feedback, will be update upcoming design base on ur comment.

grantanator

Buyer

Wed, 01 Jun 2016 04:18:54 +0000
urination hole needs to be bigger, point on top of base ring will poke the body may need to be thinner and no points, over all looks great, lock design interesting and well conceived.

grantanator

Buyer

Fri, 20 May 2016 21:59:16 +0000
None of the photos should be offensive

MacKenzie Brown

Administrator

Fri, 20 May 2016 13:08:29 +0000
Hi All, please note it's a family friendly site, so please use attachments (rather than primary image) that don't fall in that category. Thanks!

Similar Contests on Cad Crowd

simple packaging artwork convert to packaging illustration
We make packaged product and new packaging haven't arrived for the photoshoot of the packaging for our website. We need to convert artwork of our packaging (attached) to be converted to a replica of our packaging for our website. We have 5 different flavors and need one extra illustration for all flavors lined up together. So 6 illustrations in total. Attached: 1. artwork of each flavor 2. example of how lineup of all flavors should look like
Power SPDT Relay implemented with MOSFETS
I am currently using the following relay in a product: http://www.digikey.com/product-detail/en/te-connectivity-potter-brumfield-relays/RT424024/PB969-ND/1095293 It is a DPDT, non-latching relay rated for 8A switching, and a 24Vdc coil voltage. The problem: The "clicking sound." This is for a home audio application, so we need it to be silent. I am looking for a silent version, using MOSFETS for example, built onto a daughter board (PCB) with the same footprint and pin-out as the relay. Note - I only need SPDT capability (I tie the two poles of the DPDT relay via on the board that the relay is installed onto). One side of the relay coil (pin 1) is always tied to 24V. And the other side is either set to 24V or GND via this chip: http://www.digikey.com/product-search/en?keywords=296-19046-5-ND (which is controlled by a PIC micro) Requirements: - An electrical schematic of the new design - A BOM of all the parts required - Gerbers for the PCB daughter board - Same footprint and pin-out as the RT424024 relay. Note, for this SPDT version, the following pins will be tied together (12 & 22, 11 & 21, 14 & 24). They are already tied together on the PCB that the relay currently is soldered to. - Same 24Vdc "coil voltage" (pin 1 always tied to 24Vdc, and pin 2 is controlled externally to be 24Vdc or GND via the external chip mentioned above). - When the relay is not activated, pins 12 & 22 are connected to pins 11 & 21). When the relay is activated, pins 11 & 21 are connected to pins 14 & 24. - Use high current MOSFETs (the lower the turn on resistance, the better! Should be able to handle > 25 Amps continuously (ideally > 50 Amps continuously). - Must have full protection from ESD / over-voltage on every pin. - There must NOT be 'cross-conduction' of the pins. - Must be very reliable - Must be silent switching - Must be the same footprint and pinout as the relay that it is replacing (Mentioned above). Max. height is > 1 inch (we are only limited by the footprint, not the height). - Layout software can be whatever you want as long as I can get the PCB gerbers to send to my PCB house. - BOM should be in a spreadsheet (excel) - Electrical schematic can be in PDF
Premium Headphone Design
We want a premium vintage design for our new product line. It represents, vintage, traditional, formal style, high-tech, metal finish for day to day rugged use. Type: Over-ear Bluetooth Premium Headphone Target Audience: 20- 50 year olds Competitors: Bose, Sennheiser, JBL, KEF, Marshall Kilburn Design: 90° swivel earcups, extendable, foldable headphone Material: Leather headband, metal earcups (Partially plastic is also welcome) Specification Details: Driver Unit: 40mm / 50mm Bluetooth and 3.5mm plug LED Indicators to show battery, Power button with light indicators, Volume button/s (But not limited to your design, please feel free to be creative) Any software is acceptable, if STL format file can be provided. Any further questions, please feel free to comment.
Survival gear/Knife design
Working on a survival oriented product, Looking for a professional preferably with experience in the niche to finalize a design and make realistic HQ renderings of the finished product/product parts.
Engineering design: extending foundation pile support
3 different components need to join together to form 1 piece. The combined assembly is a clamp on system, that clamps onto 36" diameter pipe, then when hydraulic pistons are activated the arms extend and lock out to approximately 45deg. I have attached schematics showing in 2d what I am after. Potential for significant future work for winning designer.