I will design injection molded plastic parts and electronic enclosures
About this service
Plastic parts that are not designed for molding cause sink marks, warping, failed tooling and expensive mold rework. I design injection-mold-ready plastic parts and electronic enclosures that factories can tool and produce without surprises.
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting line planning
- PCB, battery and connector fit for electronic products
- DFM review of your existing parts
- STEP, IGES, native files and 2D drawings for toolmakers
Why work with me: my electrical engineering background means I design enclosures around real electronics, with correct clearances, cable routing and heat considerations.
Send me your concept, PCB or existing part and I will confirm scope today.
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting line planning
- PCB, battery and connector fit for electronic products
- DFM review of your existing parts
- STEP, IGES, native files and 2D drawings for toolmakers
Why work with me: my electrical engineering background means I design enclosures around real electronics, with correct clearances, cable routing and heat considerations.
Send me your concept, PCB or existing part and I will confirm scope today.
Plastic parts that are not designed for molding cause sink marks, warping, failed tooling and expensive mold rework. I design injection-mold-ready plastic parts and electronic enclosures that factories can tool and produce without surprises.
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting line planning
- PCB, battery and connector fit for electronic products
- DFM review of your existing parts
- STEP, IGES, native files and 2D drawings for toolmakers
Why work with me: my electrical engineering background means I design enclosures around real electronics, with correct clearances, cable routing and heat considerations.
Send me your concept, PCB or existing part and I will confirm scope today.
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting line planning
- PCB, battery and connector fit for electronic products
- DFM review of your existing parts
- STEP, IGES, native files and 2D drawings for toolmakers
Why work with me: my electrical engineering background means I design enclosures around real electronics, with correct clearances, cable routing and heat considerations.
Send me your concept, PCB or existing part and I will confirm scope today.
Plastic parts that are not designed for molding cause sink marks, warping, failed tooling and expensive mold rework. I design injection-mold-ready plastic parts and electronic enclosures that factories can tool and produce without surprises.
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting l... read more
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting l... read more
Plastic parts that are not designed for molding cause sink marks, warping, failed tooling and expensive mold rework. I design injection-mold-ready plastic parts and electronic enclosures that factories can tool and produce without surprises.
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting line planning
- PCB, battery and connector fit for electronic products
- DFM review of your existing parts
- STEP, IGES, native files and 2D drawings for toolmakers
Why work with me: my electrical engineering background means I design enclosures around real electronics, with correct clearances, cable routing and heat considerations.
Send me your concept, PCB or existing part and I will confirm scope today. read less
What I deliver:
- Plastic part and enclosure design with proper draft, wall thickness, ribs and bosses
- Snap fits, screw bosses, living hinges and parting line planning
- PCB, battery and connector fit for electronic products
- DFM review of your existing parts
- STEP, IGES, native files and 2D drawings for toolmakers
Why work with me: my electrical engineering background means I design enclosures around real electronics, with correct clearances, cable routing and heat considerations.
Send me your concept, PCB or existing part and I will confirm scope today. read less
Service offer categories
Product Engineering Services
Mechanical Design Services
Injection Molding Design
Software & skills
3D Design
3D Modeling
3D Product Design
3D Sheet Metal Design
3D Solid Modeling
+2 more
This service includes
| Service tiers | Simple $250 | Standard $650 | Advanced $1,400 |
|---|---|---|---|
| Summary | Single Plastic Part | Enclosure Design | Full Product Housing |
| Details | 1 injection-mold-ready plastic part with draft, ribs and bosses, STEP + native. | 2-part electronic enclosure around your PCB with snap fits/screw bosses, DFM review, STEP + drawings. | Multi-part housing (up to 6 parts), PCB/battery/connector fit, parting lines, toolmaker drawings, renders. |
| Delivery time | 4 days | 7 days | 14 days |
| Number of revisions | 2 | 3 | 3 |
★ 5.0 (1)
Lagos, Lagos, Nigeria – 4:13 a.m. local time
Member since
November 2026
Languages
English
Avg. response time
1 hour
Product Designer and CAD Engineer | Manufacturing-Ready 3D Models, Drawings and Renders
Most design projects fail in one of two places. Either the 3D model looks good on screen but falls apart when the factory tries to quote it, or the files arrive incomplete and the manufacturer comes back with a list of questions that should have been answered before the model was built. I bridge that gap. I take a concept, sketch, rough prototype, or existing product and deliver manufacturing-read...
read more
Questions and answers
Yes. Send your PCB STEP file or board outline with connector and component heights and I design the enclosure around it, with clearances, mounting bosses, cable routing and openings for ports, buttons and LEDs.
Yes. I design with proper draft angles, uniform wall thickness, ribs, bosses and parting lines, and flag anything that would raise tooling cost before you send it to a factory.
STEP and IGES for toolmakers, native CAD files, 2D drawings with critical dimensions, and STL files for 3D printed prototypes.
Yes. Send the part and the factory feedback and I will revise the design to solve the issues they raised.
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More from Valentine Emmanuel A.
More similar services
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 2D & 3D Design services
- CAD Modeling services
- 3D CAD Modeling services
- 2D & 3D Modeling services
- Engineering Design services
- Drafting services
- AutoCAD services
- Mechanical Design services
- 3D Models services
- Mechanical 3D Design services
- 2D Drawing services
- Design for Manufacturing services
- 2D Drafting services
- 2D AutoCAD services
- Product Design services
- Rendering services
- SolidWorks services
- Mechanical Engineering services
- 3D Rendering services
- 3D Solidworks services
- Manufacturing Drawings services
- 2D/3D AutoCAD services
- Assembly Design services
- Concept Design services
- 2D & 3D Modeling Solidworks services
- Engineering Drawing services
- 3D Printing Design services
- Design Engineer services
- Mechanical Engineer services
- Industrial Design services
- AutoCAD Mechanical services
- Product Development services
- Product Design and Development services