I will perform CAESAR II pipe stress analysis with a technical report
About this service
Evaluate thermal expansion, stress and support loads in industrial process piping using CAESAR II. I help engineering teams turn an agreed design basis into a traceable model, useful result tables and a technical report. My demonstrated piping work includes ASME B31.3, pressure and thermal load cases, support reactions and modal assessments. I also bring four years of mechanical FEA experience.
The first step is an input and scope review: isometrics, materials, pressure and temperature cases, pipe and insulation weights, support arrangements, equipment connections, imposed displacements, code edition and acceptance criteria. Missing information and assumptions are recorded before detailed analysis.
Depending on the scope, deliverables can include the CAESAR II model, load-case matrix, stress and displacement summaries, support-reaction tables, comparison of support alternatives and a concise calculation report. Modal analysis, flange checks and support FEA are agreed separately when needed. Findings that need further review are reported explicitly.
Hourly work is quoted at USD 45/hour. Before starting, we agree the system boundaries, expected hours, milestones, file formats and review rounds. Changes to input geometry or operating cases can change the scope.
I am an advanced Mechanical Engineering student at UTN Argentina; my degree is pending. The service provides technical analysis and documentation, without professional stamping or regulatory certification. Availabilit... read more
The first step is an input and scope review: isometrics, materials, pressure and temperature cases, pipe and insulation weights, support arrangements, equipment connections, imposed displacements, code edition and acceptance criteria. Missing information and assumptions are recorded before detailed analysis.
Depending on the scope, deliverables can include the CAESAR II model, load-case matrix, stress and displacement summaries, support-reaction tables, comparison of support alternatives and a concise calculation report. Modal analysis, flange checks and support FEA are agreed separately when needed. Findings that need further review are reported explicitly.
Hourly work is quoted at USD 45/hour. Before starting, we agree the system boundaries, expected hours, milestones, file formats and review rounds. Changes to input geometry or operating cases can change the scope.
I am an advanced Mechanical Engineering student at UTN Argentina; my degree is pending. The service provides technical analysis and documentation, without professional stamping or regulatory certification. Availabilit... read more
Evaluate thermal expansion, stress and support loads in industrial process piping using CAESAR II. I help engineering teams turn an agreed design basis into a traceable model, useful result tables and a technical report. My demonstrated piping work includes ASME B31.3, pressure and thermal load cases, support reactions and modal assessments. I also bring four years of mechanical FEA experience.
The first step is an input and scope review: isometrics, materials, pressure and temperature cases, pipe and insulation weights, support arrangements, equipment connections, imposed displacements, code edition and acceptance criteria. Missing information and assumptions are recorded before detailed analysis.
Depending on the scope, deliverables can include the CAESAR II model, load-case matrix, stress and displacement summaries, support-reaction tables, comparison of support alternatives and a concise calculation report. Modal analysis, flange checks and support FEA are agreed separately when needed. Findings that need further review are reported explicitly.
Hourly work is quoted at USD 45/hour. Before starting, we agree the system boundaries, expected hours, milestones, file formats and review rounds. Changes to input geometry or operating cases can change the scope.
I am an advanced Mechanical Engineering student at UTN Argentina; my degree is pending. The service provides technical analysis and documentation, without professional stamping or regulatory certification. Availability is up to 30 hours per month. Meetings: 14:00-18:00 Argentina time (UTC-3), or earlier by arrangement. read less
The first step is an input and scope review: isometrics, materials, pressure and temperature cases, pipe and insulation weights, support arrangements, equipment connections, imposed displacements, code edition and acceptance criteria. Missing information and assumptions are recorded before detailed analysis.
Depending on the scope, deliverables can include the CAESAR II model, load-case matrix, stress and displacement summaries, support-reaction tables, comparison of support alternatives and a concise calculation report. Modal analysis, flange checks and support FEA are agreed separately when needed. Findings that need further review are reported explicitly.
Hourly work is quoted at USD 45/hour. Before starting, we agree the system boundaries, expected hours, milestones, file formats and review rounds. Changes to input geometry or operating cases can change the scope.
I am an advanced Mechanical Engineering student at UTN Argentina; my degree is pending. The service provides technical analysis and documentation, without professional stamping or regulatory certification. Availability is up to 30 hours per month. Meetings: 14:00-18:00 Argentina time (UTC-3), or earlier by arrangement. read less
Evaluate thermal expansion, stress and support loads in industrial process piping using CAESAR II. I help engineering teams turn an agreed design basis into a traceable model, useful result tables and a technical report. My demonstrated piping work includes ASME B31.3, pressure and thermal load cases, support reactions and modal assessments. I also bring four years of mechanical FEA experience.
T... read more
T... read more
Evaluate thermal expansion, stress and support loads in industrial process piping using CAESAR II. I help engineering teams turn an agreed design basis into a traceable model, useful result tables and a technical report. My demonstrated piping work includes ASME B31.3, pressure and thermal load cases, support reactions and modal assessments. I also bring four years of mechanical FEA experience.
The first step is an input and scope review: isometrics, materials, pressure and temperature cases, pipe and insulation weights, support arrangements, equipment connections, imposed displacements, code edition and acceptance criteria. Missing information and assumptions are recorded before detailed analysis.
Depending on the scope, deliverables can include the CAESAR II model, load-case matrix, stress and displacement summaries, support-reaction tables, comparison of support alternatives and a concise calculation report. Modal analysis, flange checks and support FEA are agreed separately when needed. Findings that need further review are reported explicitly.
Hourly work is quoted at USD 45/hour. Before starting, we agree the system boundaries, expected hours, milestones, file formats and review rounds. Changes to input geometry or operating cases can change the scope.
I am an advanced Mechanical Engineering student at UTN Argentina; my degree is pending. The service provides technical analysis and documentation, without professional stamping or regulatory certification. Availability is up to 30 hours per month. Meetings: 14:00-18:00 Argentina time (UTC-3), or earlier by arrangement. read less
The first step is an input and scope review: isometrics, materials, pressure and temperature cases, pipe and insulation weights, support arrangements, equipment connections, imposed displacements, code edition and acceptance criteria. Missing information and assumptions are recorded before detailed analysis.
Depending on the scope, deliverables can include the CAESAR II model, load-case matrix, stress and displacement summaries, support-reaction tables, comparison of support alternatives and a concise calculation report. Modal analysis, flange checks and support FEA are agreed separately when needed. Findings that need further review are reported explicitly.
Hourly work is quoted at USD 45/hour. Before starting, we agree the system boundaries, expected hours, milestones, file formats and review rounds. Changes to input geometry or operating cases can change the scope.
I am an advanced Mechanical Engineering student at UTN Argentina; my degree is pending. The service provides technical analysis and documentation, without professional stamping or regulatory certification. Availability is up to 30 hours per month. Meetings: 14:00-18:00 Argentina time (UTC-3), or earlier by arrangement. read less
Service offer categories
Mechanical Engineering
3D Design Services
3D Modeling
Software & skills
ASME B31.3
CAESAR II
Pipe Stress Analysis
Piping Engineering
Pressure Vessel Design
+2 more
Member since
October 2026
Languages
English,
Spanish
Avg. response time
1 hour
Mechanical Designer | Pipe Stress Analysis | CATIA CAD & Drawings
I help industrial teams develop mechanical CAD models, fabrication drawings and analysis packages with clear assumptions and practical deliverables. My main CAD tool is CATIA, with six years of experience, supported by four years of mechanical FEA/simulation and two years coordinating design teams.
Based in Cordoba, Argentina, I bring nearly five years of experience at TXN (formerly Texon SPI) in... read more
Based in Cordoba, Argentina, I bring nearly five years of experience at TXN (formerly Texon SPI) in... read more
Questions and answers
Please provide piping isometrics or model, line list, materials, design and operating cases, support details, equipment connections and allowable loads, required code edition and reporting deadline. I review missing inputs and agree the scope and estimated hours before starting.
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More from Ignacio A.
More similar services
From
$15/hr
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 3D CAD Design services
- 2D & 3D Design services
- CAD Modeling services
- 3D CAD Modeling services
- 2D & 3D Modeling services
- Engineering Design services
- AutoCAD services
- Drafting services
- Mechanical Design services
- 3D Models services
- Mechanical 3D Design services
- Design for Manufacturing services
- 2D Drawing services
- 2D Drafting services
- 2D AutoCAD services
- CAD Drafting services
- Product Design services
- Rendering services
- SolidWorks services
- Mechanical Engineering services
- Architectural Design services
- 3D Rendering services
- 3D Solidworks services
- Manufacturing Drawings services
- 2D/3D AutoCAD services
- Assembly Design services
- 2D & 3D Modeling Solidworks services
- Engineering Drawing services
- Mechanical Engineer services
- Design Engineer services
- Industrial Design services
- Interior Design services
- AutoCAD Mechanical services