Ikhide O.

Experience

• Architect /draftsman Ok design engineering and constructions · Full-time Jan 2018 – Present 7 yrs 11 mos DT, Nigeria OKHAWERE IKHIDE
  Tel: +2347067141246, +2348157917189
  Contact: No 2 location road NPDC YARD EMADADJA, UDU AREA, DELTA STATE.
  E-mail: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
  ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
  
  PROFILE: A dynamic, confident, enthusiastic, highly motivated, result-oriented, ambitions and creative graduate. Ability to work as part of a team as well as independently with minimum supervision to meet desired goals.
  
  AREA OF EXPERTISE
  Mechanical, component design, mechanical, civil, architect drawing, and layout drafting, structural, and using 2D and 3D solid, installation machines like rolling mill billet pusher, rolling mill guide, installation of farm tanks and compressor and welding and fabrication e.g fabrication of cylindrical farm tank. Engineering document’s controls ,Project director on crane and credle design, sequencial working principal design of tower crane design, supervision of fabrication of cradle platform, Product, mechanical component, building and interior design.
  
  OTHER EDUCATION AND QUALIFICATION
  • America project management ( leverage)
  • Diploma in AutoCAD 3D and 2D , Plant 3D for piping
  • National Association of mechanical Engineers student certificate. Lagos chapter
  • Welding and fabrication certificate ( Nysc)
  • NATE ( Nigeria Association of Technologies In Engineering) certificate
  • The Council for the Regulation of Engineering in Nigeria, COREN, in progress.
  
  PERSONSAL DATA:
  BIO-DATA
  Birth-date: 31st December, 1986 Gender: Male
  Nationality: Nigeria State Of Origin: Edo
  Local Govt. Area: Owan West Marital Status: married
  Interest/Activities: Making of Research, Reading book, and Travelling
  
  EDUCATION AND QUALIFICATION WITH DATE:
  Educational (Academic)
  Higher National Diploma (HND) in Mechanical Engineering (Manufacturing option)
  Lagos State Polytechnic Ikorodu Lagos, 2012
  
  National Diploma (ND) in Mechanical Engineering Technology
  Edo State Institute Of Technology And Management Usen 2010
  Senior School Certificate O’ Level (NECO):
  Uzebba Grammar School Uzebba 2001
  
  
  
  
  
  RELEVANT WORKING EXPERIENCE
  Premium steel and mine limited 2020 – date.
  Deoartement :- centre mechanical Mentainace.
  Position:- planning and drafting engineer.
  Job disruption:-
  • Rolling mill component development design and drafting for fabrication and matching.
  • Weafri oil well servicing component development design and drafting ( as contract to C.M.M)
  • Drafting and machine of shafts with transcoup PLC
  • Development design of T.M.T in rolling mill
  • Drafting of structural members in rolling mill.
  • Conversation of all the dsc drawing from hard copy to card (re drawing of all the equipment )
  Etc
  
  Premium steel and mine limited . 2019 – date.
  Position project planner and design.
  Department, design / drafting. In central mechanical cmm.
  Job description.
  Design of warehouses
  Design of tower buildings
  Drafting of mechanical components
  Building design/
  Scaffold design and installations.
  
  
  
  Ok design engineering and constructions (contractor). 2019– date.
  Position project planner and design.
  Department, design / drafting. In central mechanical cmm.
  Job description.
  Design of warehouses
  Design of tower buildings
  Drafting of mechanical components
  Building design/
  Scaffold design and installations.
  Height access Nigeria Limited 2017 - 2018
  Position: assistant technical manager
  Technical department
  Job disruption
  • Design of suitable breaker for cleaning cradle.
  • I design, supervision of project on installation of cranes and credle and costing
  Hand sketches base on the environment.
  • installation of tower crane, cradle and scaffolding
  • Mass machine design to suit the layout to installation
  (famfa tower building project) height access limited. Lagos
  • Mono- rail machine ( cleaning cradle ) from design to
  Installation process and commissioning (grey stone tower)
  • Achievement of scaffolding design to installation in grey tone tower
  • Achievement of scaffolding design to installation in PSML for DRI PLANT
  • machinist, installation of tower crane, cradle and scaffolding
  
  
  
  AFRICAN FOUNDRY NIGERIA LIMTED 2016- 2018
  POSITION: ENGINEERING DOCUMENT CONTROL GENERAL (UNIT HEAD or MANAGER)
  ENGINEERING DESIGN DEPARTMENT
  MECHANICAL, CIVIL AND ELECTRICAL DRAFTING
  Job Description
  • Development / design of T.MT in rolling mill and fabrication supervision
  I design and cost analyze based on information on ground also developed on the existing machine and control engineering documents within and outside african industries. When necessary will install machines.
  • Act as a Lead Engineer to manage mechanical resources, technical input and deliverables on each project.
  • Supervise and mentor engineers assigned to the project in the mechanical engineering group.
  • Define requirements for design of various equipment for production facilities.
  • Prepare general arrangement drawings for the platfom facility.
  • Coordinate drafting activities and assist in application of engineering principles.
  • Prepare technical documents for Request for Quotation packages.
  • Review vendor design documents and fabrication drawings.
  • Provide construction and fabrication support, as well as expediting assistance, as required.
  PARAS ENERGY NIGERIA LIMITED IN AFRICA FOUNDRY LIMITED.
  • Design and 2D drawing of site layout for electrical plant installation
  • Design and 2D drawing for electrical pole mapping layout for ogijo to African foundry
  • Editing of electrical connection to suit the site
  
  SUFLAG NIGERIA LIMITED 2015-2016
  Mechanical engineer (supervisor)
  
  Job Description
  Daily and monthly check on generator and compressor to ensure effectiveness of the generator and compressor are in other.
  I work with chief engineer to take control documents within the sun flag group.
  • Mentainace and overhauling of screw compressor ( pulling and coupling of bearing system in compressor, scoder generator system )
  • Mentainace caterpillar generator( troubleshooting)
  • welding and fabrication stainless pipe for industrial boil holes
  • machining of different taxi machines component
  • drawing of shaft as to machine it for reuse.
  • operation of fire tube boil and drawing of the flow chart for recognition
  • Welding of stainless pipe
  • cut of plat sheet into shape and calculation involve.
  • Volume calculation on capacity of ETP sysstem and design drawing both in 2d and 3d
  • FALCOM GAS CO-OPERATION 2014 -2015
  Job Description
  installation of natural gas line (mechanical fitter)
  GREEK CONSTRUCTION NIGERIAL LIMITED (CONTRACTOR) 2012 - 2014
  Job Description
  • DESIGN WORK USING AUTOCAD, ACHICAD AND HYSYS: -
  • Design, calculation analysis and Drawing of overhead tank in 2d and 3d for pz nutricima farm
  • Design of farm tank of about 800m3 for Greek construction limited
  • Design of gat in nutricima pz custodian
  • Drawing of oven for ok welding and fabrication limited, etc
  • Drawing farm tank for Greek Construction limited capacity 1000m3
  • Drawing of Niger biscuit dressing room
  
  
  PROJECT HANDLE
  • Layout plant for both SMS,ROLLING MILL,DRI AND UTILITY AT PSML
  • Design of different comencial and residential building and supervision of the work. delta state warri
  • TMT, ROLLERS GUID, FUNACE SKIDES TO RAILS MODIFICATION AT PSML
  • Achievement of scaffolding design to installation in PSML for DRI PLANT (PSML)
  • MASS MACHINE DESIGN TO SUIT THE LAYOUT TO INSTALLATION
  • (FAMFA TOWER BUILDING PROJECT) HEIGHT ACCESS LIMITED. LAGOS
  • MONO- RAIL MACHINE ( CLEANING CRADLE ) FROM DESIGN TO
  • INSTALLATION PROCESS AND COMMISSIONING (GREY STONE TOWER)
  • Achievement of scaffolding design to installation in grey tone tower (lagos)
  • height access limited. lagos. e.t.c.
  
  
  FALCOM GAS CO-OPERATION 2014 -2015
  Job Description
  installation of natural gas line (mechanical fitter)
  GREEK CONSTRUCTION NIGERIAL LIMITED (PRIVATE CONTRACTOR) 2012 - 2014
  Job Description
  DESIGN WORK USING AUTOCAD, ACHICAD AND HYSYS: -
  Design, calculation analysis and Drawing of overhead tank in 2d and 3d for pz nutricima farm
  Design of farm tank of about 800m3 for Greek construction limited
  Design of gat in nutricima pz custodian
  Drawing of oven for ok welding and fabrication limited, etc
  Drawing farm tank for Greek Construction limited capacity 1000m3
  Drawing of Niger biscuit dressing room
  
  COMPUTER SKILL
  Proficient in process engineering package like
  • AUTOCAD 2D&3D
  • PLANT 3D
  • SOLIDWORKS
  • ARCHICAD IN BUILDING
  • LUMION INTERIOR DESIGN
  • HYSYS DESIGN
  • AUTOCAD RIVIT
  • Proficient in Microsoft suite and outlook .
  Good in graphics design ( core draw)
  COMPETENCE AND SKILLS:
  • Ability to learn fast and adjust to changes
  • Passion to work as a team with full cooperation
  • Interpersonal and Analytical skill
  • Good communication skill (written and verbal)
  • Organizing work and meeting deadlines.
  • Establishing new, and maintaining existing, relationships with customers
  • Managing and interpreting customer requirements Designs, raise/submit quotations
  • Calculating client quotations
  HOBBIES: Reading, playing with figures, researching and thinking abstract imagination try to bring it real.
  
  Engr. S.K .BALLO PROF ORIA USIFO
  Head Of Department (HOD), 28 OBOH ST, IKPOBA HILL, P.O. BOX 4673, BENIN CITY.
  Mechanical Engineering Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
  Lagos State Polytechnic, Ikorodu. Christ Apostolic Church, Mile 2
  TEL: 08056300726, 08038414340. 08062909123