Hire CAD designers & engineers near KwaZulu-Natal, South Africa

I have significant experience in mechanical engineering and manufacturing principles and have owned and operated by own mechanical engineering business which involved manufacturing and fabrication. I... Read more

I have significant experience in mechanical engineering and manufacturing principles and have owned and operated by own mechanical engineering business which involved manufacturing and fabrication. I produce 3d mechanical designs and drawings utilising strict engineering principles and experience gained from working as a mechanical engineer for 16 years+. Additionally I have a formal mechanical engineering honours degree with very good academic results and was inducted in the Golden Key international academic honours society.

Hello and thanks for reading my Bio. I'm a mechanical engineer with 2D drafting, 3D modelling and CAE experience. My drafting experience include product, prototype and machine design. I design vari... Read more

Hello and thanks for reading my Bio. I'm a mechanical engineer with 2D drafting, 3D modelling and CAE experience. My drafting experience include product, prototype and machine design. I design various products for the Aerospace, Defence, Commercial, Medical, Marine and Industrial sectors. I basically involved in the ideation/conceptual phase, design, prototype and testing of the product. I also have project management experience and often work with startups. Software that I use are AutoCAD, Inventor, SolidWorks, SketchUp, ANSYS, SimScale, FreeCAD, Keyshot, Meshmixer and 3D builder. My curriculum vitae is available on request. Available for any questions. My time zone is GMT+2, South Africa. Thanks for reading.

Good day. My Name is Marius, I have more than 30 years of experience in CAD and I am passionate about my work. My designs range from cardboard displays to engineering components and more. I started... Read more

Good day. My Name is Marius, I have more than 30 years of experience in CAD and I am passionate about my work. My designs range from cardboard displays to engineering components and more. I started with Autocad, then moved on to PTC Creo, and Solidworks, and now I use Fusion 360. I really enjoy the tools that allow me to create stunning designs, all glory goes to God

I am a 3D artist with over a decade of personal and professional experience. I supply artwork to clients around the world.

I am a 3D artist with over a decade of personal and professional experience. I supply artwork to clients around the world.

Qualified Chemical Engineer with over 6 years of experience in Engineering Design and 3D/2D Modeling. Experience in Mechanical Design and Product Development.

Qualified Chemical Engineer with over 6 years of experience in Engineering Design and 3D/2D Modeling. Experience in Mechanical Design and Product Development.

With over 9 years of experience in Design, Draughting, and Project Management, I am a versatile and creative professional who can deliver high-quality solutions for various industries and markets. My... Read more

With over 9 years of experience in Design, Draughting, and Project Management, I am a versatile and creative professional who can deliver high-quality solutions for various industries and markets. My passion for design is driven by the need to learn new techniques and skills, and to adapt to the changing demands of the industry. I have a strong background in graphic and web design, UI implementation, and multimedia design, which complement my CAD and PM competencies. I also have experience in structural steel draughting, quantity estimating, and site management, which enable me to foresee and resolve potential issues in the design and manufacturing processes. My goal is to create value for my clients and my company by delivering innovative and effective design solutions.

Master of Engineering Studies with Distinction - University of Auckland, New Zealand Bachelor of Engineering with First Class Honours - University of Waikato, New Zealand A versatile engineer with a... Read more

Master of Engineering Studies with Distinction - University of Auckland, New Zealand Bachelor of Engineering with First Class Honours - University of Waikato, New Zealand A versatile engineer with a broad knowledge base.

Retired ex Cad Tooling Designer and CNC programmer for the automotive industry in South Africa. Latter part of my career I spent at Franke Kitchen Systems. Currently into 3-D Printing and designin... Read more

Retired ex Cad Tooling Designer and CNC programmer for the automotive industry in South Africa. Latter part of my career I spent at Franke Kitchen Systems. Currently into 3-D Printing and designing. Just love what I do!

I am a very dedicated draughtsman with 10+ years experience in mechanical, structural design and detailing both in 2D and 3D. I also have some extensive experience in piping and instrumentation.

I am a very dedicated draughtsman with 10+ years experience in mechanical, structural design and detailing both in 2D and 3D. I also have some extensive experience in piping and instrumentation.

Welcome! I’m a licensed architect, with a masters degree in architecture and over 6 years of experience, specializing in modern-minimalist designs for residential projects, and other building types. I... Read more

Welcome! I’m a licensed architect, with a masters degree in architecture and over 6 years of experience, specializing in modern-minimalist designs for residential projects, and other building types. I work closely with clients worldwide to create functional, energy-efficient spaces that reflect their personal style. From custom homes to renovations, I deliver detailed building plans, photorealistic 3D renders, and immersive 3D walkthrough animations to bring your vision to life. Drop me a message - I look forward to working with you!

My name is Marco Lopes and I am a Mechanical Design Engineer, with 4 years of experience. I am a young and enthusiastic mechanical engineer passionate about problem solving, design engineering and tec... Read more

My name is Marco Lopes and I am a Mechanical Design Engineer, with 4 years of experience. I am a young and enthusiastic mechanical engineer passionate about problem solving, design engineering and technology, capable of designing mechanical systems from first principles through to working prototypes. My greatest strengths include the ability to apply my engineering knowledge to real world problems, actively within the work space and the ability to take the initiative in a project environment. with experience in; • 3D modelling (Autodesk Inventor) • 2D drafting (AutoCAD) • Mechanical design • Component design • Product design I have 4 years of engineering experience in the fast-paced automotive production industry and recently the heavy rigging and construction industry. I work well under pressure and always ensure work is completed in a timely manner at an impeccable standard. Working in the automotive production industry, I was tasked with the design and simulation of automotive tooling components for companies such as Ford, Opel and BMW. The tooling components formed part of the complete production process line. Working in the heavy rigging construction industry I am tasked with designing specialized lifting equipment for unique engineering lifts. I work in and among all types of industries, giving me broad spectrum of basic engineering understanding in all engineering disciplines. I am capable of bringing your design ideas to life and producing working prototypes. In addition to design and modelling services, I can provide other engineering services such as, technical communication, report writing and project management. Please feel free to contact me with any questions or project inquiries, I am more than willing to discuss ideas and potential projects.

Improvise Adapt & Overcome. Ambitious South African brought to make something from nothing. Choose better, get better and be better.

Improvise Adapt & Overcome. Ambitious South African brought to make something from nothing. Choose better, get better and be better.

I am a 34year old natural talented artist that has a sharp eye when it comes to cutting edge modern & futuristic 3D designs.

I am a 34year old natural talented artist that has a sharp eye when it comes to cutting edge modern & futuristic 3D designs.

Im a highly professional 2d & 3d designer which creates clean trendy and professional work. I use mostly CAD and Sketchup 3d. I have 4years creating 3D modeling.

Im a highly professional 2d & 3d designer which creates clean trendy and professional work. I use mostly CAD and Sketchup 3d. I have 4years creating 3D modeling.

i am a professional 3D / BIM modeller with 26 years experience in the engineering consulting industry. i have worked on multi billion dollar structures ranging from NEOM to 610m extra dosed bridges... Read more

i am a professional 3D / BIM modeller with 26 years experience in the engineering consulting industry. i have worked on multi billion dollar structures ranging from NEOM to 610m extra dosed bridges in UAE. I have also worked on hotels and shopping malls and many industrial projects as well. I can also provide computational design (python and Dynamo in Revit, Grasshopper and Rhino)

SolidWorks Machine Design - With over 30 years experience in machine design and building using SolidWorks as the CAD medium I am more than proficient in both machine design and the SolidWorks CAD pack... Read more

SolidWorks Machine Design - With over 30 years experience in machine design and building using SolidWorks as the CAD medium I am more than proficient in both machine design and the SolidWorks CAD package.

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic... Read more

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic designs, cost analysis, feasibility studies and Bim modelling. I have gained experience working with various software such as C3D, Revit and Infraworks. This has given me ample time to develop a strong work ethic necessary for work in the field. Previously I worked for AECOM ZA where I have had extensive site experience and built strong competencies in inspection, report writing and people’s management. I worked on the Temba water purification plant phase 6 (TWPP-6) and Mooi Mgeni transfer scheme phase 2 (MMTS-2). Working on various aspects of the TWPP-6 and MMTS-2 has given me a great appreciation and insight into the importance of Water and Environmental Engineering in the future of any developing country. As an Engineering inspector and water Engineer I have developed flexibility by being required to inspect multiple disciplines under construction supervision such as buildings and civils works on various water purification structures, pump stations, substations, pipe chambers precast yard and housing platforms. I have also done a good deal of pipe line inspection involving monitoring, clearing, excavation, laying of bedding material, pipe laying, backfilling, lining and coating pipes, mechanical installations, and commissioning. I was fortunate to gain valuable insight and exposure as student whilst working on the Spring Grove Dam under BKS Consulting. I worked in the laboratory for two weeks doing certain lab tests as well as the evaluation of the results. I assisted with the inspection of RCC as well as the reinforced concrete for the intake structure. I also monitored the design of the layer works for the roads and the design and construction of the earth embankment. The time spent with BKS Consulting allowed me the opportunity to monitor drawings and designs as well as practice on Auto CAD.

I have been placed in multiple positions of responsibility throughout my academic career. I have successfully served my term as Head Prefect in my high school, Al-Falaah college (a school that boasts... Read more

I have been placed in multiple positions of responsibility throughout my academic career. I have successfully served my term as Head Prefect in my high school, Al-Falaah college (a school that boasts the highest scoring matric results nationally in the year 2016). I have been a campus tutor for Mathematics, Thermodynamics and Physics and I have been allocated the highest budgeted masters research project in the history of UKZN's Aerospace Systems Research Group (ASReG). I am proficient in Solidworks CAD modelling, Simulation execution (FEA, CFD and topology optimization). My Masters has allowed me to efficiently mathematically model systems in Microsoft Excel, predict motion and analyse trends. I have presented graphical analysis of data to a wide variety of audiences both within and out of the engineering space. I am a part of the Phoenix Hybrid Sounding Rocket launch campaign as a member of the ground support team where I am responsible for the rocket lug design and oxidizer measurement systems.

I am a senior mechanical engineering product designer, specialist in 3D CAD design and FEA of sheet metal and heavy steel fabrication with 16 years of experience. I am passionate about CAD design and... Read more

I am a senior mechanical engineering product designer, specialist in 3D CAD design and FEA of sheet metal and heavy steel fabrication with 16 years of experience. I am passionate about CAD design and analysis, with strong focus on technical documentation and drawing detail accuracy. This includes 3D and 2D fabrication and assembly drawings in Solid Works, Creo (including Windchill) and Inventor (including Vault) as well as considerable FEA experience (Including ANSYS non-linear). I have designed a wide variety of product across many sub disciplines of mechanical engineering (Structures, driveline, suspension, hydraulics, composites… etc.). I have successfully taken many complex projects from concept to production, often reducing complexity and yielding significant cost savings all while complying with the relevant international standards.

I am a mechanical / industrial designer working in the tool and die industry. I design injection molds, extrusion blow molds and products for the plastics packaging industry. I have been using Siemens... Read more

I am a mechanical / industrial designer working in the tool and die industry. I design injection molds, extrusion blow molds and products for the plastics packaging industry. I have been using Siemens NX (formerly Unigraphics) CAD software for the past 12 years, I have also worked with CATIA and AutoCAD in the past.

Based in Durban, South Africa. I do freelance CAD and Mesh work from home. I run a small local 3D service with 3D scanners, FDM Plastic printing, and also SLA Resin prints. I turn client photos in to... Read more

Based in Durban, South Africa. I do freelance CAD and Mesh work from home. I run a small local 3D service with 3D scanners, FDM Plastic printing, and also SLA Resin prints. I turn client photos in to ornaments for commercial molding and casting. Over 8 years experience in the 3D field with skillsets for knowing what's printable, print settings, advanced hand finishing, etc. Reverse engineering services mainly for the US market. I contract to a commercial scan service to turn their scans in to Solid models /STEP files in Fusion.

I am an engineering student, who has been Using Auto-desk Inventor and CAD for the past 6 Years. I have experience with designing and building Drones and UAVs as well as simple gas turbines.I have al... Read more

I am an engineering student, who has been Using Auto-desk Inventor and CAD for the past 6 Years. I have experience with designing and building Drones and UAVs as well as simple gas turbines.I have also been a model aeroplane enthusiast for my entire life. If you need it to fly, I can help! Have a look at my Instagram profile to get an Idea of the projects I have worked on. I look forward to designing for you

I have a honours degree in Chemical Engineering; a Master’s in Business Leadership (MBL) degree and, registered as a Professional Engineer with ECSA. My experience is in excess of 40 years from the Co... Read more

I have a honours degree in Chemical Engineering; a Master’s in Business Leadership (MBL) degree and, registered as a Professional Engineer with ECSA. My experience is in excess of 40 years from the Consulting and Project environment within the Pulp & Paper sector, Industrial Power & Energy Generation, Renewable Energy, Environmental Solutions, Industrial Processes, Water & Effluent treatment, Sustainability related projects in the mining, energy / renewable energy & Agri sector and; limited experience in the Petro-Chem industry. I have travelled widely (both local and international) to evaluate new technology, to international conferences and on project assignments. My areas of expertise are: • Technical / Consulting services (Incl. Strategic Studies, Feasibility Studies, Technical Due Diligence, Sustainability) • Process integration (investigating, evaluating & implementing new technology) • Cost Engineering (Financial models, project budgets, cost estimation, cash flow predictions, project cost control, window schedules, procurement and contract negotiations) • Process Design (including process simulation, chemical, mass and energy balances) • Front End Engineering; Project Development (from concept / idea to final solution); Project Scoping and “cradle to grave” analysis; Project execution • Renewable and Sustainable Energy • Circular and Low Carbon Economy My expertise has been recognised through domestic and international assignments as lead process specialist and technology advisor, providing expert input into a number of engagements with companies like Mondi, Sappi, M&R, Metso, Valmet, Jakko Poyry, AF Engineering, MHPS, RavFin..... I have been directly associated with numerous strategic and capital projects (both green fields and brown fields) and have completed concept development and design for projects ranging from minor modifications to complete process plants. My Advantage:  When developing solutions, I always take a holistic approach to define the alternatives and find the most appropriate solution always taking into consideration the trade-offs between technology & economic constraints, environmental demands and sustainability requirements; and facilitate choices between business priorities.  I have extensive experience in multi - disciplinary engineering projects.  I have both technical and financial capability (Experience with project scoping, Capex preparation, project justification and preparation of Board Papers).  I have worked with and managed a multi-cultural team.  I have been directly associated with numerous strategic and capital projects (both green fields and brown fields) and have completed concept development and design for projects ranging from minor modifications to complete process plants. I have a passion for energy efficiency and technologies that support Environmental objectives which have steered me to pursue desktop research in the following topics: o Carbon Capture and Utilisation (Concentrating on the Fuel Pathway) o Bio Fuels (Bio Ethanol and Bio Diesel) o Anaerobic Effluent treatment and Bio gas production o Alternative non wood fibre processes o Electric Power Generation using Buoyancy-Induced Columnar Vortices o Desalination Technologies o Green Hydrogen production o Coal and Biomass Gasification Technologies o Combined Heat and Power Process Solutions incorporating Tri and Quad Power Generation Concepts together with Utility scale water production o Sustainable hybrid Power Generation concepts o Fuel Cell Technologies o Clean Coal Technologies

I have been in the drafting business for over 13 years and the amount of experience that I have accumulated over the years sets me apart from my competitors.

I have been in the drafting business for over 13 years and the amount of experience that I have accumulated over the years sets me apart from my competitors.