Hire Local CAD Designers near Wilmington, California

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite... Read more

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite Element Modeling (CATIA, ABAQUS, LS-DYNA) for both composite and homogeneous materials. Hands on experience with manufacturing processes for Aluminum, Composites, and metal bonded products.

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC rob... Read more

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC robotics team. Each year we design and build a 125lb robot and it is my job to direct this process. I have certified my abilities with the CSWP and CSWA exams which establish my ability as professional grade

Mechanical Engineering student at SJSU 3 years experience in Solidworks - Mechanical design 2 years experience with 3d printing - Optimizing print settings/ troubleshooting printer problems

Mechanical Engineering student at SJSU 3 years experience in Solidworks - Mechanical design 2 years experience with 3d printing - Optimizing print settings/ troubleshooting printer problems

Almost 20 years of experience in product design and technical project management.

Almost 20 years of experience in product design and technical project management.

I have 30 years extensive background in Computer-Aided Design, 3D modeling, Model Making, Rendering, 3D part scanning, CNC Programming using Catia. Prototype development from concept to finish product... Read more

I have 30 years extensive background in Computer-Aided Design, 3D modeling, Model Making, Rendering, 3D part scanning, CNC Programming using Catia. Prototype development from concept to finish product. I can translate your models to any cad system via Step, Iges and many other formats. Also can program CNC machines up to 5-Axis. I'm located in Southern California. Worked in all industries. Fast and Reliable. See photos in my profile.

MDP CAD Solutions is comprised of mechanical design professionals who focus on creative solutions for complex 2D & 3D CAD projects. Our mission is to assist our clients by taking their ideas from conc... Read more

MDP CAD Solutions is comprised of mechanical design professionals who focus on creative solutions for complex 2D & 3D CAD projects. Our mission is to assist our clients by taking their ideas from concept to production. We strive for innovation and work carefully in order to stay within budget while providing maximum value for our clients.

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

A 3D Modeler with a comprehensive knowledge base and specialized skill combination of 3D modeling, texture, UV mapping, rigging, rendering, and animation.

A 3D Modeler with a comprehensive knowledge base and specialized skill combination of 3D modeling, texture, UV mapping, rigging, rendering, and animation.

3D CAD designer, concept to production prototype engineer, creative, and problem solver. If you're an entrepreneur looking to get professional renderings done for marketing purposes, you need a printe... Read more

3D CAD designer, concept to production prototype engineer, creative, and problem solver. If you're an entrepreneur looking to get professional renderings done for marketing purposes, you need a printed prototype to test, or you need to take a prototype to full-scale production, I have experience with each. I'm flexible on my rate depending on the job and typically spend more time than I bill to make sure my clients are 100% satisfied.

I design everything, I use CATIA and Solidworks for CAD projects. I do CAM works using Powermill and finally render by Keyshot If you need. I also can do art works such as logo design using Photoshop

I design everything, I use CATIA and Solidworks for CAD projects. I do CAM works using Powermill and finally render by Keyshot If you need. I also can do art works such as logo design using Photoshop

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, ste... Read more

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, steel and aluminum weldments, steel and aluminum forgings, aluminum and magnesium die castings, aluminum forgings, sheet stamping and forming, and powdered metal. I also have extensive experience in industrial design.

I design precise, manufacturable parts and assemblies using FreeCAD. I deliver clean parametric models, TechDraw sheets, and export files ready for 3D printing, CNC, and fabrication. I focus on clear... Read more

I design precise, manufacturable parts and assemblies using FreeCAD. I deliver clean parametric models, TechDraw sheets, and export files ready for 3D printing, CNC, and fabrication. I focus on clear communication, fast delivery, and files that work first time. Services I Offer 3D printable parts (STL, hollowing, wall thickness checks) CNC and laser‑ready DXF exports with TechDraw documentation Parametric parts and assemblies with constraints and versioning Design for Manufacturing checks and simple revisions Why hire me Clean parametric models that are easy to edit Manufacturing‑ready exports: STEP, STL, DXF, SVG, TechDraw PDF Fast turnaround and clear delivery checklist Revision policy: 1 free revision; paid extras for scope changes

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturin... Read more

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturing, injection molding, forming methods, and CNC milling » Author of educational series on designing for 3D printing, manufacturing, and assembly » Proficient modeler of home goods, accessories, jigs & fixtures, industrial parts, and more.

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

3D modeling professional

3D modeling professional

IQ creates content that graphically supports clientele in developing advertisements, promotional media, product catalogs, new product launches, e-commerce content, websites, product videos, and more.... Read more

IQ creates content that graphically supports clientele in developing advertisements, promotional media, product catalogs, new product launches, e-commerce content, websites, product videos, and more. The content created by IQ includes photo realistic images, animations, and motion graphics.

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product... Read more

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product engineering, from feasibility analysis and cost estimation to prototyping and production. Notable achievements include designing a self-balancing three-wheel vehicle, engineering the Will.I.AMG for the 2022 Miami F1, and developing the Nikola One hydrogen-electric Class-8 truck. Markus has a proven ability to lead projects from concept to completion, leveraging skills in CAD design, kinematic layout, and advanced manufacturing techniques. He has successfully collaborated with global stakeholders and managed teams across diverse projects, including the development of the Fisker Karma Sunset retractable hard top, Aptera’s mass-production-ready body redesign, and the high-performance LaMarc hypercar. Fluent in German, Markus also brings extensive experience working with renowned brands like BMW, Audi, and Fisker Automotive. He holds a Mechanical Engineering degree and excels in program management, problem-solving, and efficient manufacturing practices. Whether leading large teams or contributing as a hands-on innovator, Markus consistently delivers cutting-edge engineering solutions that align with business goals and customer expectations.

My name is Graham and I am a senior studying Industrial Design at CCA. I have exceptional work experience and a passion for design and 3D modeling. I have excellent visual communication skills, kno... Read more

My name is Graham and I am a senior studying Industrial Design at CCA. I have exceptional work experience and a passion for design and 3D modeling. I have excellent visual communication skills, knowledge of model making, rapid prototyping, and manufacturing techniques. I am proficient with many digital tools, including Solidworks, Rhino, Keyshot, and the Adobe Creative Suite. I’m also well acquainted with the design process and design research.

+ Lots of experience in designing complex mechanical systems, mainly competition robots and robot components + Experience in designing technical 3D prints, from compact, low cost belt sanders to modu... Read more

+ Lots of experience in designing complex mechanical systems, mainly competition robots and robot components + Experience in designing technical 3D prints, from compact, low cost belt sanders to modular desktop organizers + Strength of creativity used to value and emphasize elegant, functional designs + Multiple years of SolidWorks CADding and Rendering experience + Helped design a world championship level competition robot, winning a design award. + Designed an affordable, compact belt sander, receiving thousands of upvotes and multiple rewards on Reddit

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron i... Read more

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron is able to develop elegant solutions to any problems laid at his feet. Aaron is currently a staff designer at Teveri LLC, where he has created numerous biometric wearables based on a liquid-metal technology that he also played a key role in developing.

I’m an Engineering CAD Technician living in Southern California. I Design and create visual content. While working as a consultant for the Los Angeles Department of Water and Power, I specialized i... Read more

I’m an Engineering CAD Technician living in Southern California. I Design and create visual content. While working as a consultant for the Los Angeles Department of Water and Power, I specialized in electrical drawings for various projects in the Los Angeles and surrounding areas. I have also had the opportunity to work for Southern California Edison where I focused mainly on CAD/GIS projects. At Parsons Corporations I was able to work in Civil Design. My career has afforded me the opportunity to work in both the private and public sectors and has given me a vast knowledge in all areas of Engineering and CADD/GIS. Currently I work for Metropolitan Water District of Southern California as a Sr. Designer. There, I provide drafting/design support to major projects by creating and updating various MicroStation CAD drawings/3D models.

I'm a project architect based in California. I do plan drafting, space remodeling, and construction drawings. I'm well educated in the United States building codes. I have an architecture degree from... Read more

I'm a project architect based in California. I do plan drafting, space remodeling, and construction drawings. I'm well educated in the United States building codes. I have an architecture degree from New York Tech. My name is Uthman, and I'm an architect who designs and produces building and construction plans for clients like you! I have 5+ years of office and school experience with software like AUTOCAD and Revit, and I work with projects that require construction, documentation, and approval. I work with any kind of materials and information that you can provide, and you're going to receive professional and high-level detailed drawings in any official format you want. I have Experience in California and all around the United States of America 1: City submission, blueprints, and redlines 2-Home Addition ADU. 3-Architecture Design. 4-Lndscaping work. 5 full house permit sets

I have a passion for Solidworks, AutoCAD, and photoshop so I am eager to expand my knowledge set and skills utilizing this software to help anyone that needs general 3D and 2D design assistance. I cu... Read more

I have a passion for Solidworks, AutoCAD, and photoshop so I am eager to expand my knowledge set and skills utilizing this software to help anyone that needs general 3D and 2D design assistance. I currently have access to the following programs: -SolidWorks (2017) -AutoCAD (2017) -Photoshop (CS2) My core skill set is SolidWorks which extends 4 years and I have the ability to work using the tools below: -Photoview 360 (Rendering) -Surfaces -Sheet Metal -Weldments -Molds -Sketches -Animations (motion studies) -Complex Assemblies -Converting conceptual data to computer models -Product design & Development -3D Modeling and Rendering AutoCAD I am working extensively to obtain a higher skill set to progressively take on more complex and difficult Problems. General skill set is listed below for AutoCAD: -2D Archtecture -2D Park/landscape Layouts -Satellite image to AuoCAD -Layer Management -Custom Template/Drawings Photoshop skills are limited to essential photograph manipulation and digital art. Being entree level, I seek to work hard on your projects for very low cost to benefit you as well as well as use the opportunity for improvement in the Engineering / Manufacturing field. I am excited and will love to assist on any of your projects as I would put the same level of attention into them as I would my own. Please view my personal website / portfolio to view examples of my past work to give you a better understanding of my qualification. I look forward to working with you. Thank you, Cameron Ross

I have been involved in the film and television industry of Southern California for over 20 years. I worked for a 3D modeling and animation software company based in San Diego, CA called Pixels Inc.,... Read more

I have been involved in the film and television industry of Southern California for over 20 years. I worked for a 3D modeling and animation software company based in San Diego, CA called Pixels Inc., maker of the Mac OS Pixels 3D suite of modeling, animation and rendering tools. Pixels also created the Tempest Renderer which used Total impact G4 multi-chip cards (up to 52 processors in a box about the size of a PC tower). While at Pixels, I worked with companies like Digital Domain, Industrial Light and Magic, and Apple Inc. (The software was a Mac only suite). I was also responsible for building software plugin installers and helping national and international customers with sales, installations, and general trouble shooting of both technical and creative natures. During that time, I also attended and graduated from the Art Institute of California with an Associate of Science in 3D, holding the distinction of receiving the "Best Portfolio" award for the class of 2001. Over the years, I have provided videography, editing, motion graphics, animation, 3D Product design, and design for 3D printing as a contract artist for many L.A. and Denver based post production facilities and other companies needing my skills.