Hire CAD designers & engineers in Roselle, Illinois

I have worked in the 3D industry since 2007.

I have worked in the 3D industry since 2007.

Designer with 15 years experience, I have worked in multiple design principles including, Electrical schematic designs, Piping & instrumentation Documents, Structural designs, cabinetry, Space plannin... Read more

Designer with 15 years experience, I have worked in multiple design principles including, Electrical schematic designs, Piping & instrumentation Documents, Structural designs, cabinetry, Space planning, 3D design and renderings, the list continues. I am here for any of your design needs.

Mechanical engineer who continually demonstrates effective problem solving and delivers creative solutions. Values trust, communication, and work ethic. Has industry experience designing and launching... Read more

Mechanical engineer who continually demonstrates effective problem solving and delivers creative solutions. Values trust, communication, and work ethic. Has industry experience designing and launching new commercial products, and prototyping those designs. Focused on working with early product development projects. Completed projects include: - Flying Turbine Concept: Concept of a floating wind turbine which takes advantage of the high altitude wind speeds. This optimizes the efficiency of the turbine to generate power at lower costs. - Product Improvement (Glue Gun Holder): A redesign project of a popular consumer product which was receiving bad reviews. The poor performance and failure modes were analyzed, and the product was redesigned to perform better. - Water Purification in HVAC System: A new device used to separate rust from flowing water. This was done to avoid the malfunction of modern magnetic pumps, which was due to rust build up at the pump. Don't hesitate to contact me if you have any questions!

I'm a product developer. I've been an Auto Body Technician, Personal Assistant, Welder/fitter, Millwright, Wood Worker, as well as many other things in several different industries. Now its time to ma... Read more

I'm a product developer. I've been an Auto Body Technician, Personal Assistant, Welder/fitter, Millwright, Wood Worker, as well as many other things in several different industries. Now its time to make my dreams real by bringing my innovative ideas to market. I'm working on several different (Green Energy Generation Solutions) as well as several other products.

Hello! I am car/industrial concept designer I really like to follow the tasks and deadlines. My projects benefit people, that's the main thing for me

Hello! I am car/industrial concept designer I really like to follow the tasks and deadlines. My projects benefit people, that's the main thing for me

Energetic leader and creative project manager with over 6 years of experience in residential and commercial architecture. I have successfully managed projects of different scales including local and i... Read more

Energetic leader and creative project manager with over 6 years of experience in residential and commercial architecture. I have successfully managed projects of different scales including local and international. My expertise in project management, building codes, including ADA, helps me to design spaces which are not only compelling, but functional and compliant

I am a dedicated Mechanical Design and Production Engineer with a passion for precision and innovation. With extensive experience in drafting individual parts, constructing multi-part assemblies, and... Read more

I am a dedicated Mechanical Design and Production Engineer with a passion for precision and innovation. With extensive experience in drafting individual parts, constructing multi-part assemblies, and designing entire factory lines, I excel in delivering robust engineering solutions. My expertise in FreeCAD, combined with my proficiency in Python-based automation, allows me to streamline workflows and enhance project efficiency. Holding a bachelor's degree in Mechanical Engineering and a master's degree in Data Science, I leverage large data sets to devise empirical solutions that drive performance and innovation.

Organized, detail-oriented, dedicated student of physics with experience in mechanics, and a passion for optics. Experience modeling, fabricating, and creating drawings for components with tight toler... Read more

Organized, detail-oriented, dedicated student of physics with experience in mechanics, and a passion for optics. Experience modeling, fabricating, and creating drawings for components with tight tolerances alongside those of colleagues as parts in a larger design.

Mechanical Engineer with 20+ years experience in Mechanical engineering, Design and CAD. Experience in many aspects of Mechanical Design: Design Assessment, Concepts, Detail design with manufacturing... Read more

Mechanical Engineer with 20+ years experience in Mechanical engineering, Design and CAD. Experience in many aspects of Mechanical Design: Design Assessment, Concepts, Detail design with manufacturing drawings. Deep knowledge in multiple fields of manufacturing - different casting methods (sand, high pressure die casting), plastic injection molding, milling turning etc. , sheet metal fabrication, rapid prototyping - different type of 3D printing (Direct Metal Sintering, plastic printing) . Beyond Mechanical Engineering I offer reverse engineering. 3D model creation from 2D drawing, 3D scan or sketches, recreate old drawings in modern CAD system and 3D visualization, rendering. Worked for the leader automotive consulting firms I have the resources to meet your engineering, design, prototyping, and other needs.

Mechatronic Engineer with 9 years of experience in industry, involved in automation and control projects, conducting different improvements in processes to obtain benefits in production. Also integrat... Read more

Mechatronic Engineer with 9 years of experience in industry, involved in automation and control projects, conducting different improvements in processes to obtain benefits in production. Also integrating systems to correct chronic failures coordinating activities, always focused on giving the greatest benefit at the lowest cost without forgetting safety, quality, and reliability.

• Designing building maps and projects with teams • Rendering and animating various projects. • Conduct site evaluations to ensure quality of work and adherence to safety standards. • Oversee and... Read more

• Designing building maps and projects with teams • Rendering and animating various projects. • Conduct site evaluations to ensure quality of work and adherence to safety standards. • Oversee and makerecommendations throughout entire construction process • Convert files from Teamcenter, Sketch-up, Microsoft Office, PDF and others into 3Dsmax(Vray&Corona), AutoCAD and other architecture computer software's. • Assist project teams in the development of a design through sketches, software models, diagrams, massing studies, and other visual formats. • Utilize BIM technologies in development of three-dimensional models of buildings and their components. • Prepare and revises documentation in various architectural phases including site plans, floor plans, building elevations, building sections, details and assist in site analysis, research of concept, benchmarks, typology. • Coordinate building systems (structural, mechanical, electrical, etc.) to ensure compatibility with the design intent. • Implement sustainable design principles into the building design and surrounding environment.

I provide full color 3d renderings and floorplans for your new kitchen, bath, bar, mudroom, rec room. My service includes your selections for cabinetry, counter tops, wall tile, flooring, and ceilings... Read more

I provide full color 3d renderings and floorplans for your new kitchen, bath, bar, mudroom, rec room. My service includes your selections for cabinetry, counter tops, wall tile, flooring, and ceilings. I have over 45 years experience helping people design their new homes and renovations. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a mechanical engineer and have worked in some sort of design or manufacturing setting for almost 10 years. I specialize in helping companies do three things: 1. Making your product more cost-... Read more

I am a mechanical engineer and have worked in some sort of design or manufacturing setting for almost 10 years. I specialize in helping companies do three things: 1. Making your product more cost-efficient to produce 2. Refining your product so that it is easy for the customer to use 3. Accelerating your development process. I know speed is key when getting any new project started so I get you what you need ASAP. Some of my accomplishments so far -Helped a company that raised 500k in crowdfunding to develop the product they are now selling, reducing their manufacturing cost by over 20% -Helped a company raise their first round of funding by designing and prototyping their first product -Worked with product development firms with large customers to work out kinks in their designs and fabricate their prototypes -Worked with another crowdfunding campaign to make develop their beta-testing product. -Designed tooling for robotic arms to automate manufacturing processes resulting in massive reduction in labor cost I am proficient in the following disciplines -SolidWorks 2018 -Inventor 2018 -FEA (Finite Element Analysis - finding the weak points in a structural design) -Rapid prototyping (3D Printing, CNC Machining, etc.) -Design for manufacturing I work with a small 3D Printing company here in Chicago that can produce very high quality 3D prints with an excellent turnaround time. I also have a complete workshop with saws/mills/drills/CNC where I can build pieces or prototypes for virtually any project. I love working with startups to get their product moving. I like the fast pace environment and love seeing something we work on go to market.

Summary of services - Provide a roadmap of product design and project management - Prioritize deliverables - Set project deadlines and meet On Time Delivery (OTD) - Leverage resources to maintai... Read more

Summary of services - Provide a roadmap of product design and project management - Prioritize deliverables - Set project deadlines and meet On Time Delivery (OTD) - Leverage resources to maintain strong business-client communication, - including client access to file sharing - Maximize development efficiency and minimize errors and revisions by acknowledging responsibilities of both the project development team and the client - Provide a SOW document to analyze the overall outlook of the project management and the design process It is critical to maintain a high level of organization and planning so each project is handled professionally. With our methodology, we will get the job done and help you bring your ideas to life.

I have over 17 years of experience in commercial and residential floor plans. I am a highly trained and resourceful Design expert that thinks independently and works collaboratively to promote client... Read more

I have over 17 years of experience in commercial and residential floor plans. I am a highly trained and resourceful Design expert that thinks independently and works collaboratively to promote client success collectively. WHAT I OFFER: • Schematic Design • Drawings • Floor Plans Design • Elevation • Section View • Details • Reflected Ceiling Plan • Interior Plan Development • Graphic Design • Site Plan Development • Shop Drawing • As-Built Drawing Quality Renderings 100% Guaranteed I specialize in Realistic 3D Renderings, Floor plans, and any type of modeling service related to Architecture and Engineering. I provide you with the highest quality product at a great value. Renderings we offer: • Exterior Renderings • Interior • Floor Plan • Areal View • Site Plan • Landscape Process: 1. Inquiry 2. Agreement 3. Proof Rendering 4. Final Rendering SOFTWARE: AutoCAD, Revit, Sketchup, Rhino, Adobe Illustrator, InDesign, Photoshop, ArchiCAD and much more! I am a taskmaster at every level. The fears of most clients stem from lack of transparency, slipping time frames and rising budgets. I provide transparent quotes and reliable, predictable timelines.

Inspired by a philosophy of limitless perspective, Lumiere bridges the gap between imagination and reality. We are a dedicated studio of 3D artists and technical experts who believe that great design... Read more

Inspired by a philosophy of limitless perspective, Lumiere bridges the gap between imagination and reality. We are a dedicated studio of 3D artists and technical experts who believe that great design deserves to be seen with absolute clarity before a single brick is laid. For us, 3D visualization is more than just creating images; it's about exploring every possibility, validating design decisions, and providing our clients in the architecture, construction, and engineering sectors with the visual tools they need to bring their projects to life. Our approach is simple: Precision in every pixel, and partnership in every project. We combine artistic vision with rigorous technical skill to produce photorealistic renderings and video walkthroughs that are not only beautiful but also meticulously accurate.

A Mechanical Engineer graduate from Purdue University Northwest highly focused in sustainable energy solutions. Previous experience in Fire Alarm System Design, FEA Analysis and Parametric Modelling.... Read more

A Mechanical Engineer graduate from Purdue University Northwest highly focused in sustainable energy solutions. Previous experience in Fire Alarm System Design, FEA Analysis and Parametric Modelling. Have had the opportunity to work on projects such as designing, assembling, and creating presentations for radial pneumatic engines, as well as developing Portable Single-axis Solar Tracking Photovoltaic Systems.

I am a mechanical design engineer with 13 years experience using PTC proE Creo. For over a decade I have provided engineering services, 2d/3d cad modeling, drafting, GD&T, research & development, and... Read more

I am a mechanical design engineer with 13 years experience using PTC proE Creo. For over a decade I have provided engineering services, 2d/3d cad modeling, drafting, GD&T, research & development, and new product development for large companies like Caterpillar, Komatsu and Oshkosh. I’ve developed new designs for mining truck cabs which included cab doors, plastic panels, sheet metal components, brackets, ROPS, rubber seals and other cab components. Other designs include suspension components for military vehicles, surface modeling, plastic design, castings, sheet metal design and more.

I am currently a student pursuing a degree in Mechanical Engineering. I go to Missouri University of Science and Technology. I have experience in both Solidworks and Fusion360. Both of these programs... Read more

I am currently a student pursuing a degree in Mechanical Engineering. I go to Missouri University of Science and Technology. I have experience in both Solidworks and Fusion360. Both of these programs have been used extensively for my personal projects, projects for school, and for my internship with Flying-S.

I have forever been interested in Art and Design. I have been building and creating things since I was 5. Currently 37 working on my degree in Computer Aided Design. I am mostly an inventor but I... Read more

I have forever been interested in Art and Design. I have been building and creating things since I was 5. Currently 37 working on my degree in Computer Aided Design. I am mostly an inventor but I am also very good at creating designs for personal use or more.

I grew up building and creating ideas to make things stronger, cheaper, faster. Since then I have finished schooling for Mechanical Engineering and have had experience in the Ag Industry with design a... Read more

I grew up building and creating ideas to make things stronger, cheaper, faster. Since then I have finished schooling for Mechanical Engineering and have had experience in the Ag Industry with design and also the manufacturing of that equipment. I enjoy seeing needs in the market, diagnosing the real issue, and then looking and creating a solution for the need. I have had experience with 3D CAD component modeling/engineering, FEA, Assemblies, BOM's and Sales Structures, mathematical calculations and sizing, CAD rendering, and manufacturing prints. Some of the projects included design of machine frames & structures, plastic components, and both steel and stainless steel sheet metal weldments. For more about past experience, see my LinkedIn Profile: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I'm a professional by trade but a down to earth kind of guy. I enjoy working in architecture and have been doing since 2000 when I first started using AudoCAD. I also do basic animation vlogging on Yo... Read more

I'm a professional by trade but a down to earth kind of guy. I enjoy working in architecture and have been doing since 2000 when I first started using AudoCAD. I also do basic animation vlogging on Youtube as a hobby. I enjoy cycling and running.

I have worked on and prototyped designs 2015. I have worked with many companies and stakeholders to find unique, innovative solutions to complex problems. In school, I was part of several design team... Read more

I have worked on and prototyped designs 2015. I have worked with many companies and stakeholders to find unique, innovative solutions to complex problems. In school, I was part of several design teams. I have designed high-performance automotive and industrial systems, as well as premium consumer products.

Millwork draftsman with 3+ years shop experience, 1+ years autocad cad experience. Able to draft, help engineer, and review drawings. Detail oriented and will go above and beyond to create presentab... Read more

Millwork draftsman with 3+ years shop experience, 1+ years autocad cad experience. Able to draft, help engineer, and review drawings. Detail oriented and will go above and beyond to create presentable, accurate, easy to follow drawings.

Hi, my name is Benjamin Ellis. I am a mechanical engineer living and working in the Chicago area. I received my BSME from Tennessee Technological University in 2012. My past work experience encomp... Read more

Hi, my name is Benjamin Ellis. I am a mechanical engineer living and working in the Chicago area. I received my BSME from Tennessee Technological University in 2012. My past work experience encompasses multiple responsibilities in high-volume manufacturing in the automotive sector, including tool design, process design, quality inspection methods, CMM and vision inspection system programming, robotics programming, PLC programming, process automation, machine design, metallurgy, CNC machining, and both 2D and 3D CAD, among others. Additional work experience includes roles in manufacturing process design and control, quality control, and product improvement at a steel fabrication facility. The additional skills gained at this workplace include the use of inventory and production tracking software, personnel management, and both raw material and equipment/machinery resource management. This combined work experience has given me the needed skills and knowledge to take products from concept to reality. I have had the privilege of working with outstanding mentors in my field that have trained me to look ahead in the product development cycle to identify potential problems and challenges and to plan accordingly. A deep understanding of and enthusiasm for the various manufacturing processes available has influenced my product design work with a constant eye toward manufacturability and cost. Furthermore, when it comes to engineering, I highly endorse the notion that the simplest process or design is the surest path to success.

3 AutoCAD certifications, CADD Manager for over 10 years, Microstation 15 years, AutoCAD 31 years. Set up 3 offices with AutoCAD. CADD Designer for Civil, Electrical, Landscape, Fiber Optics, Floorpla... Read more

3 AutoCAD certifications, CADD Manager for over 10 years, Microstation 15 years, AutoCAD 31 years. Set up 3 offices with AutoCAD. CADD Designer for Civil, Electrical, Landscape, Fiber Optics, Floorplans, Utilities and Surveying.

I'm a detailed-oriented 3D modeler. My professional experience includes making models and drawings for IOT hub assemblies, precast concrete structures, as well as commercial furniture. However, my int... Read more

I'm a detailed-oriented 3D modeler. My professional experience includes making models and drawings for IOT hub assemblies, precast concrete structures, as well as commercial furniture. However, my interest lies with toys, games, and general household items. I'm most comfortable using SolidWorks, but have experience in the 2D and 3D aspects of AutoCAD. I have experience with additive manufacturing and understand how to design a model with 3D printing in mind. I take care to make sure my models and drawings are accurate and can withstand major changes in the future. Thank you for your time, and I hope to hear from you soon!