Hire CAD designers & engineers in Newbury Park, California

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC rob... Read more

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC robotics team. Each year we design and build a 125lb robot and it is my job to direct this process. I have certified my abilities with the CSWP and CSWA exams which establish my ability as professional grade

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contr... Read more

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contract Roles

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project... Read more

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project from concept to supply chain design and procurement strategy, and would love to do the same for you.

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the... Read more

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the potential to limit my future well-being. The decision to pursue a degree in mechanical engineering was a logical solution to replicate this enjoyment from working on engines, but also a decision that would provide better future career opportunities. My academic endeavor was less-than conventional, as I was also responsible for a mortgage and funding my own tuition. Although I am married, I am not the type of individual to rely entirely upon my wife with the burden of financial assistance. An unfortunate result of my stubbornness is the notion of accepting an internship, as it could provide an obvious educational value but lacked necessary financial requirements. My participation in on-campus race car teams provided the perfect opportunity to obtain design experience, and to promote these designs in a competitive environment.

Im Mechanical Designer with experience building machinery, fixtures and jigs using CAD softwares. More than 10 years of experience in the industry of consumer electronics and plastic molding injection... Read more

Im Mechanical Designer with experience building machinery, fixtures and jigs using CAD softwares. More than 10 years of experience in the industry of consumer electronics and plastic molding injection area. *Knows of GD&T and Safety machinery methodology *Full projects management from start to finish *Strict communications with client, for me its very important for a total satisfaction.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

I am a dedicated Mechanical Engineer with a strong background in design engineering. With hands-on experience in SolidWorks, I specialize in creating precise and efficient 3D models. Throughout my car... Read more

I am a dedicated Mechanical Engineer with a strong background in design engineering. With hands-on experience in SolidWorks, I specialize in creating precise and efficient 3D models. Throughout my career, I have worked on a variety of projects, including my Final Year Project where I successfully designed and implemented a solar-powered thermoelectric refrigeration system. In addition to my academic achievements, I have honed my skills by working on various CAD design projects. My expertise lies in producing accurate, detailed models while adhering to engineering standards and ensuring functionality in real-world applications. I am passionate about innovative design and take pride in my ability to transform ideas into practical solutions.

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Mode... Read more

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Modeling, and Architectural Visualizations. Currently working at Tesla.

As a SolidWorks expert with strong skills in Solid Edge and ANSYS, I excel in 3D modeling, converting 2D designs into accurate 3D CAD models, and machine part modeling. I’m dedicated to delivering hig... Read more

As a SolidWorks expert with strong skills in Solid Edge and ANSYS, I excel in 3D modeling, converting 2D designs into accurate 3D CAD models, and machine part modeling. I’m dedicated to delivering high-quality designs that meet technical requirements and exceed expectations. Whether you need complex part development, 2D-to-3D conversion, or simulation, I have the expertise to bring your project to life with precision. Let's collaborate to make your ideas a reality!

Highly creative and experienced 3D modeler and illustrator seeking a challenging role where my skills in 3D modeling, design, and collaboration can contribute to innovative and impactful product devel... Read more

Highly creative and experienced 3D modeler and illustrator seeking a challenging role where my skills in 3D modeling, design, and collaboration can contribute to innovative and impactful product development across various industries.

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resource... Read more

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resources, provides an exemplary level of client service through a streamlined, creative and efficient approach to every project. Hands-on and detail oriented, comfortable working with surveyors, engineers, scientists and on unique teams finding cost effective methods for getting projects off the ground and through the pipeline. • Proficiency in Autocad and Solidworks 2017 and newer • Designs include part design and assemblies with prints • Mechanical, architecture, and some electrical architecture • Knowledge of innovative drafting methods • Visually communicative • Familiar with steel welding fabrication practices

Hello there! My name is Dylan Reed. My design journey began over two decades ago creating logos and editing photos for my parents toy store. This experience led me to hone my design skills studying ar... Read more

Hello there! My name is Dylan Reed. My design journey began over two decades ago creating logos and editing photos for my parents toy store. This experience led me to hone my design skills studying architecture at the University of Notre Dame, which eventually led me to work in the film industry as a set designer and model maker. My main areas of expertise are in 3D modeling, sculpting, and rendering as well as architectural drafting, design, and construction documentation.

I’m an Engineering CAD Technician living in Southern California. I Design and create visual content. While working as a consultant for the Los Angeles Department of Water and Power, I specialized i... Read more

I’m an Engineering CAD Technician living in Southern California. I Design and create visual content. While working as a consultant for the Los Angeles Department of Water and Power, I specialized in electrical drawings for various projects in the Los Angeles and surrounding areas. I have also had the opportunity to work for Southern California Edison where I focused mainly on CAD/GIS projects. At Parsons Corporations I was able to work in Civil Design. My career has afforded me the opportunity to work in both the private and public sectors and has given me a vast knowledge in all areas of Engineering and CADD/GIS. Currently I work for Metropolitan Water District of Southern California as a Sr. Designer. There, I provide drafting/design support to major projects by creating and updating various MicroStation CAD drawings/3D models.

Bachelor in Design by Unesp and master in multimedia by Unicamp (Brazil both). CEO and co-founder of Samp Motors.

Bachelor in Design by Unesp and master in multimedia by Unicamp (Brazil both). CEO and co-founder of Samp Motors.

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial C... Read more

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial College London, a globally top-10 university. My capabilities include but are not limited to: - Product Design (hand sketches/design conceptualization) - Consulting and Recommendations for Design for Manufacturability, Material Selection, and Manufacturing Methods - Design for Manufacturing – Injection Molding, CNC Machining, Forming, Casting, etc. Mold Design - 3D Modeling - Sheet Metal (3D Model and DXF Files with bends and cut lines) - 3D Simulation and Analysis (stress/strain/fluid flow/volumetric analysis/fatigue analysis/center of gravity/etc.) - Dynamic Motion Simulation - 3D Renderings (Photo Realistic) - 2D Engineering Drawings (ASME Y14.5 Standard) - Assembly Drawings with BOM (Bill of Materials) - Design Specification Drawings - Tech Packs I have launched a freelance mechanical design engineering practice, StellarForged, working with a diverse range of clients—from small startups to established companies. Whether you're tackling a fundamental engineering challenge or navigating a complex problem, I provide the expertise and support needed to drive your success. https://stellarforged.com/

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throu... Read more

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throughout my career, I've learned to design and model extensively in AutoCAD, Fusion, and other similar software like Blender or Catia. Please let me know if I can help with your design needs! In addition, I am a useful source for rapid prototyping and manufacturing.

Independent drafter based in Chihuahua, Mexico, specializing in custom residential projects in USA. I have over three years of experience producing detailed architectural drawings, executive projects,... Read more

Independent drafter based in Chihuahua, Mexico, specializing in custom residential projects in USA. I have over three years of experience producing detailed architectural drawings, executive projects, and schedules, as well as high-quality renderings.

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, ste... Read more

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, steel and aluminum weldments, steel and aluminum forgings, aluminum and magnesium die castings, aluminum forgings, sheet stamping and forming, and powdered metal. I also have extensive experience in industrial design.

Specializing in sheet metal and tubing, with extensive experience in prototyping and product design for manufacturability. Skilled in SolidWorks, having created over 1000 parts and assemblies with bui... Read more

Specializing in sheet metal and tubing, with extensive experience in prototyping and product design for manufacturability. Skilled in SolidWorks, having created over 1000 parts and assemblies with build sheets, BOM, etc. Focused on optimization of efficiency, precision, and production readiness.

MECHANICAL DESIGN Not all companies offering 3D CAD design services are equal. At Bend Engineering, we bring nearly 15 years of experience in product design to the table. Our customers have come to... Read more

MECHANICAL DESIGN Not all companies offering 3D CAD design services are equal. At Bend Engineering, we bring nearly 15 years of experience in product design to the table. Our customers have come to trust us to provide state of the art design services that are focused squarely upon their product design and development needs. Our ability to focus on bringing our customers’ concepts to the marketplace in a short amount of time begins with the use of leading edge Solidworks 3D and Fusion 360 solid modeling design software. Whether you need a design for manufacturability or are interested in concurrent design and development services, we are here to help your business succeed. 3D CAD Design Services include: • 3D solid modeling design – a complete product designing package. • 2D detailed drawings, plots, pictorial plots and technical illustrations – for instruction manuals and sales literature. • NEW conceptual drawings – starting from scratch, customer sketches, or other materials • Fully detailed parts and assembly drawings – suitable for quoting, costing, product promotion, and production of required manufacturing tooling. • Reverse engineering design services – we can transform your existing 2D parts and assemblies into fully 3D solid CAD models.

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite... Read more

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite Element Modeling (CATIA, ABAQUS, LS-DYNA) for both composite and homogeneous materials. Hands on experience with manufacturing processes for Aluminum, Composites, and metal bonded products.

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the... Read more

Mechanical Engineer, Design Concentration with over 15 years experience designing new products. I started my first job in silicone valley and eventually moved to southern California. I have had the opportunity to work with different companies which gave me the ability to learn about diverse products and manufacturing processes. Actually working with a small company in North San Diego as R&D lead mechanical engineer. In additionI am offering my services to people who are looking to make a modification to an existing product, to reverse engineer a component, generate file for 3D printing, generate drawing for quote or drawings for patent submission. I utilize 3D software from which I extract parametric drawings and files I can use to 3D print. Please don't hesitate to contact me for a quick preliminary pricing.

Easy going & ready to work. -Knowledgeable in SolidWorks -Novice in CATIA -Successfully modeled an "Autonomous Sheep Pen" for a Capstone Design Project; Client: California Ag Solutions -Background in... Read more

Easy going & ready to work. -Knowledgeable in SolidWorks -Novice in CATIA -Successfully modeled an "Autonomous Sheep Pen" for a Capstone Design Project; Client: California Ag Solutions -Background in Mechanical Engineering, Writing Minor

I've been extremely fortunate to have worked on a broad array of products in many industries over the course of my career. I've found that my passion is in consumer product development because it requ... Read more

I've been extremely fortunate to have worked on a broad array of products in many industries over the course of my career. I've found that my passion is in consumer product development because it requires thinking deeply about all aspects of the user experience. Thoughtful and elegant design is central to the products I'm most proud to have collaborated on including the Ember Ceramic Mug, iPhone, and Apple Watch. I am an expert in product design and validation. Experienced in complex integrated designs, DOEs, risk mitigation, FMEA, design for manufacturability, and design for reliability. Familiar with a wide array of materials, finishes, and manufacturing processes from composite optical stacks to sheet metal and everything in between.

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron i... Read more

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron is able to develop elegant solutions to any problems laid at his feet. Aaron is currently a staff designer at Teveri LLC, where he has created numerous biometric wearables based on a liquid-metal technology that he also played a key role in developing.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.