Hire Local CAD Designers near Lithonia, Georgia

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

I am a Civil Engineer (M.Sc.) with over 8 years of hands-on experience in AutoCAD drafting and structural drawing production for commercial, office, residential, and industrial (pre-engineered) steel... Read more

I am a Civil Engineer (M.Sc.) with over 8 years of hands-on experience in AutoCAD drafting and structural drawing production for commercial, office, residential, and industrial (pre-engineered) steel structures. I specialize in producing accurate, detailed, and construction-ready drawings, including structural plans, sections, details, and reinforcement layouts for steel and reinforced concrete buildings. In addition to AutoCAD drafting, I provide full structural design and analysis services using ETABS, SAP2000, SAFE, and PLAXIS (2D & 3D), as well as BIM modeling and documentation in Revit and Tekla Structures. This combination allows me to deliver not only precise technical drawings but also fully coordinated structural solutions, from initial modeling to final construction documents. I am committed to fast turnaround, clean and professional drafting standards, and accurate technical detailing tailored to each client's project requirements.

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawin... Read more

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawing sets using AutoCAD and Revit, with a strong understanding of construction methods, scale, and code-driven documentation. In addition to drafting, I can support design development—helping translate early concepts, markups, or schematic ideas into clear, buildable drawings that align with project constraints and code requirements. My work focuses on plans, elevations, sections, details, and revisions based on redlines, field notes, or review comments. I’m often brought in to turn rough inputs into organized, professional documentation that’s easy to review, permit, and build from.

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

I am an OSP Designer at a Telecommunications company in Georgia. I went to school for Mechanical Engineering at the University of North Georgia.

I am an OSP Designer at a Telecommunications company in Georgia. I went to school for Mechanical Engineering at the University of North Georgia.

My skills are mainly focused on drafting, construction documentation, designing kitchen and bath spaces, and 2+ years of experience in hospitality design. Skills: - AutoCAD - SketchUp - Revit - Mill... Read more

My skills are mainly focused on drafting, construction documentation, designing kitchen and bath spaces, and 2+ years of experience in hospitality design. Skills: - AutoCAD - SketchUp - Revit - Millwork Details - Architectural Details - 3D Modeling

I have been drawing in 2d CAD (Autocad) since 2000. I started drawing in Solidworks 2007. I have done a lot of reverse engineering, Converting 2d files to 3d. I have mostly done mechanical drawings bu... Read more

I have been drawing in 2d CAD (Autocad) since 2000. I started drawing in Solidworks 2007. I have done a lot of reverse engineering, Converting 2d files to 3d. I have mostly done mechanical drawings but I have in the past year gotten into Architectural as well. I work full time at CCS Image group in Cumming Ga. I have a access to both Solidworks 2017 and 2018 and Autocad 2016 and 2017. Thanks you for your time. I look forward to working with you. Thanks James

Hi! I am an enthusiastic worker and really enjoy using Autocad. With many years with the program under my belt I am accurate and efficient on any project I touch.

Hi! I am an enthusiastic worker and really enjoy using Autocad. With many years with the program under my belt I am accurate and efficient on any project I touch.

Mechanical Design Engineer Working for an automotive lighting supplier. 5000 hours of CATIA V5 experience.

Mechanical Design Engineer Working for an automotive lighting supplier. 5000 hours of CATIA V5 experience.

I am a senior Mechanical Engineering Student at Georgia Institute of Technology looking to put all the CAD classes to use, built some out-of-class experience, and make a little extra cash.

I am a senior Mechanical Engineering Student at Georgia Institute of Technology looking to put all the CAD classes to use, built some out-of-class experience, and make a little extra cash.

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I ha... Read more

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I have been in Mechanical Design using Solid Works & Solid Edge. I can produce 2D prints using DraftSight (AutoCad clone). I can also produce 3D models using the aforementioned programs. I can also produce photo-realistic renderings out of CAD models. I recently started my own Freelancing business called Scott Lester Drafting & Design. On the side, I teach Engineering Design at the same community college I graduated from.

Enter Zahoor Ahmad's architectural visualization studio to see how fantasies become a reality. I'm the conduit who turns your visions into attainable miracles with my ▒▒▒▒▒▒ Pro skills. I am skilled i... Read more

Enter Zahoor Ahmad's architectural visualization studio to see how fantasies become a reality. I'm the conduit who turns your visions into attainable miracles with my ▒▒▒▒▒▒ Pro skills. I am skilled in PowerPoint, AutoCAD, 3ds Max, Sketchup, and Photoshop, and I focus on creating realistic 3D exterior and interior renderings that reflect the magnificence of architecture.

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

I have 30 years of CAD experience. Models, assembly and sheet metal. Solidworks 19, Fast and accurate. Passionate about my work

Lynx Professional Outsourcing Architectural Services expertise in design, drafting, and detailing services across various platforms, which helps Architecture businesses increase profits through faster... Read more

Lynx Professional Outsourcing Architectural Services expertise in design, drafting, and detailing services across various platforms, which helps Architecture businesses increase profits through faster production and cost reduction while attracting new customers. Our team is proficient in various software like Revit, AutoCAD, Sketch Up, 3D Max, ArchiCAD, and can provide a range of services from conceptual design to the final design. We can also work on amended plans for refurbishing, alterations, and renovating existing buildings. Additionally, we have extensive knowledge in project management, design consulting, 3D modeling, and graphic representations. Lynx Professional Services takes pride in delivering top-notch service and excellence in our work for clients in the architecture and interior design sectors. For any architecture outsourcing services Hire an Architect and Get a Call Back.

I am currently finishing up my CAD/CAM/CNC program and am eager to help you with your projects. While still new to this particular field; I have diverse work experience (sales, warranty, and produ... Read more

I am currently finishing up my CAD/CAM/CNC program and am eager to help you with your projects. While still new to this particular field; I have diverse work experience (sales, warranty, and production), creativity in problem solving, good eye for aesthetics, and boundless work ethic. I look forward to working with you!

Bachelor's degree in Mechanical Engineering with over 6 years of experience, mainly in the automotive field. During my career, I've taken several projects from sketch and concept to the start of mass... Read more

Bachelor's degree in Mechanical Engineering with over 6 years of experience, mainly in the automotive field. During my career, I've taken several projects from sketch and concept to the start of mass production. As well as working in OEM programs in a Tier 1 supplier company.

A beginning 2D CAD Technician specializing in concept design. With a keen eye for detail, I excel in creating precise and visually appealing technical drawings. I like to collaborate with architects,... Read more

A beginning 2D CAD Technician specializing in concept design. With a keen eye for detail, I excel in creating precise and visually appealing technical drawings. I like to collaborate with architects, engineers, and designers. I transform complex ideas into accurate 2D representations. While my expertise lies in 2D CAD, I am eager to expand my knowledge and stay up-to-date with the latest software and design trends. My dedication, accuracy, and passion make me a valuable asset to any concept design team.