Hire CAD designers & engineers in Lawrenceville, Georgia

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Invent... Read more

My name is Carl Rush and I am a 3D Designer/Drafter. I attended Southern Crescent Technical College and received and Associates Degree in Drafting and Design. I am professionally trained to use Inventor 2013-15, AutoCAD Mechanical 2013-15, and Solidworks 2013.

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Des... Read more

Born in DRCongo, I moved to the USA in 2010. I studied art during my high school years. In 2008 I got my high school diploma in painting then started working toward an associate degree in Interior Design which I did not obtain because I had to move to the USA. Presently, I have a bachelor degree in architecture from Georgia Institute of Technology. I am experienced in healthcare and commercial architecture. And I work on many different 3D design and 2D CAD design on the side.

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I hav... Read more

I have more than twenty years of professional experience in the architectural, structural engineering, civil engineering and fabrication fields, to offer. During my positions as CADD technician, I have performed numerous and varied tasks within and outside the scope of drafting and design. I am certain that my past experiences have given me the skills to perform the duties that are requested of me.

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressiv... Read more

Robert Gittens, the owner of BIMSync'd, boasts profound expertise spanning over 30 years in the building and construction sector - structural and miscellaneous steel detailing focus. With an impressive track record of 20 years dedicated to offering invaluable guidance, training, technical support, and aiding technical sales, he has become a trusted authority in the industry. Robert Gittens possesses an unwavering passion for the building and construction industry, fueling his dedication to advancing the education system with the latest innovations in Building Information Modeling (BIM). Recognizing the need for a more proficient and well-equipped workforce, he played a pivotal role in the establishment of the Bachelor's in BIM Management program at Georgia Highlands College. This visionary initiative aims to cultivate a generation of professionals who possess comprehensive knowledge and expertise in BIM. By spearheading this educational endeavor, Robert is actively shaping the future of the industry, fostering a workforce that is adept and "BIM educated."

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like t... Read more

Hello, I am currently learning Revit and Civil 3D on an Autodesk 2021 seat and I would enjoy putting the license to work. Having experience with both engineering and drafting design, I would like to provide services utilizing Revit Architectural and Structural packages. Having a degree in Civil Engineering gives me the background for understand the design requirements for the structural integrity of the structure. The majority of design experience is with reinforced concrete, prestressed concrete and allowable steel design is about 14 years. One year I worked as a drafting contractor bidding for bridge beam shop drawings. (20% of work) However, I also am interested in CAD design. I have a drafting degree in Architectural/Mechanical Drafting and am seeking to update my skills with Autodesk certification. Also I have a CATIA Technician certificate used for design of a test model for an aerodynamic control surface , general assembly and part integration with structures and systems and design of standard parts for 8+ years Gulfstream. I plan to use the parametric skills learning to better understand Revit 3D design.

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to... Read more

I've been developing products for manufacturing for close to 20 years. My work has supported several large national brands as well as many humble start-ups. I understand how to position the product to serve the BOM and the brand.

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include... Read more

Hi there, my name is Patrick Haertel. I am an engineering student with Solidworks experience. I have experience in 3D printing and designing parts to be 3d printed. Some minor projects of mine include a shelf project, a birdhouse project, and a fidget spinner project. All of these were modeled in Solidworks, but I also have some experience with Fusion 360. I also have experience in CNC carving. I have created multiple projects using the CNC and VCarve Pro.

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mec... Read more

Emelody Worldwide focuses primarily on applied research and product development at the core. Our personnel contain a diverse background in highly skilled fields ranging from aerospace engineering, mechanical engineering, numerical simulation, B2B sales, and business development. Our experiences rangers from simple concept and design regarding consumer products to applied research within novel unmanned aircraft technology. Lastly with our extended network of fabricators and vendors we can provide reliable turn key solutions for any budget and are willing to consult prior to initiation to mitigate uncertainties and ambiguity. We are passionate about the clients we serve and provide a great value while maintaining excellent customer service. Additionally we encourage individuals and companies interested in product development and applied research requirements to contact us to see the difference in the reputable service we provide, and a proven methodology that serves as a foundation for repeat outsourcing and technical consulting.

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for m... Read more

Have 0ver 40 years experience in manufacturing along with over 25 years in CAD. I use ALIBRE DESIGN for 3D Models, 2D Drawings, BOM, which can be saved as any type CAD files. Have done projects for major corporations, small companies and individual inventors. I have two years of Engineering plus I have a Drafting Technical Diploma. I hold a number of 3D Modeling and AutoCAD Training Certificates. The majority of my CAD work over the last 25 years has been Product Design and Mechanical Design.

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawin... Read more

I’m an architectural drafter with 5+ years of professional experience supporting residential, commercial, and public-sector projects. I specialize in construction documentation and permit-ready drawing sets using AutoCAD and Revit, with a strong understanding of construction methods, scale, and code-driven documentation. In addition to drafting, I can support design development—helping translate early concepts, markups, or schematic ideas into clear, buildable drawings that align with project constraints and code requirements. My work focuses on plans, elevations, sections, details, and revisions based on redlines, field notes, or review comments. I’m often brought in to turn rough inputs into organized, professional documentation that’s easy to review, permit, and build from.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

I am a Mechanical Engineering student at the University of Alabama. As part of my curriculum, I have taken courses in SolidWorks and have a good understanding of the software.

i'm a professional designer who is seeking freelance and contract 3D modeling and rendering jobs to supplement my income. If you are looking for someone to help you flesh out a concept into a design,... Read more

i'm a professional designer who is seeking freelance and contract 3D modeling and rendering jobs to supplement my income. If you are looking for someone to help you flesh out a concept into a design, I can help. I also have some mechanical engineering experience, because I design actual products that need to be manufactured. I will give you overall functional product construction without each screw placement, however. I'm open to short and quick jobs and really flexible on what kind of work you're seeking to do. For a more detailed list of what my experience covers, continue reading below. I'm an experienced home hard goods designer (furniture, lighting fixtures & tabletop decor). After graduating from RISD, I worked at a consultancy that designed office furniture and architectural lighting. One of my office furniture designs won Best of Neocon in 2002. I designed office furniture for Kimball Office and lighting for Nessen, D'ac and LAM. Since then, I've designed both high-end custom pieces working with small-scale artisans as well as mass market outdoor furniture and lighting targeted at Big Box retailers including Lowe's Hardware, Sam's Club, The Home Depot and Macy's. Working at both larger companies with in-house product development managers to smaller manufacturers where I've worn all the hats from art director for print, photoshoots, website and showroom to project management from concept to delivery. As a multi-faceted designer with a wealth of experience, I am able to take the parameters you set (price, target market segment, manufacturing constraints) and produce compelling design that fits those parameters. One key strength is that I am able to synthesize the subjective qualities (look & feel) that you are targeting by embodying it into a physical product. I live very comfortably in that space. Making the subjective into the objective. I look forward to working with you. Lighting Fixture Design Furniture Design Home Decor Design New Concepts Product Development Material & Color Palettes Market Research Mass Production/Custom Designs Project Management Vendor Relations Rhino3D Modeling Keyshot Renderings

Roadway Design Engineer with experience in Roadway design and modeling, sidewalk design, Roundabout layout design, and Modeling.

Roadway Design Engineer with experience in Roadway design and modeling, sidewalk design, Roundabout layout design, and Modeling.

My skills are mainly focused on drafting, construction documentation, designing kitchen and bath spaces, and 2+ years of experience in hospitality design. Skills: - AutoCAD - SketchUp - Revit - Mill... Read more

My skills are mainly focused on drafting, construction documentation, designing kitchen and bath spaces, and 2+ years of experience in hospitality design. Skills: - AutoCAD - SketchUp - Revit - Millwork Details - Architectural Details - 3D Modeling

I've been drawing in CAD using multiple platforms since 1999. I do a variety of different types of drawings now from shop drawings to residential additions to CAD detailing.

I've been drawing in CAD using multiple platforms since 1999. I do a variety of different types of drawings now from shop drawings to residential additions to CAD detailing.

I help clients turn concepts into manufacturable, visually impressive products — from early mechanical layouts to production-ready CAD models and renderings. I’m a Mechanical Engineering graduate fro... Read more

I help clients turn concepts into manufacturable, visually impressive products — from early mechanical layouts to production-ready CAD models and renderings. I’m a Mechanical Engineering graduate from Auburn University, where I co-designed and built Auburn’s 1st-place unmanned electric watercraft for the 2025 ASNE P.E.P. competition. My background combines: • CAD & 3D Modeling: SolidWorks, NX, complex assemblies, DFM & GD&T • Analysis & Validation: FEA, tolerance analysis, design reviews • Automation & Visualization: Python scripting, SolidWorks Visualize rendering I bring a hands-on, manufacturing-minded approach to every project — whether it’s a product enclosure, mechanical system, or small machine. Clients appreciate my ability to think like both a designer and a builder. If you need a precise, fast, and collaborative engineer who can take your idea from sketch to final model, let’s talk — I’m ready to jump in and deliver results that look great and work perfectly.

I am a 3D artist/ entrepreneur seeking to add more clients to work with for my business, Innovative 3D. Please reach out if you need 3D modeling, rendering, design, retopology from scanned images or B... Read more

I am a 3D artist/ entrepreneur seeking to add more clients to work with for my business, Innovative 3D. Please reach out if you need 3D modeling, rendering, design, retopology from scanned images or BIM assets created!

- Capable of meeting deadlines and adapting the project to satisfy the client's desire - Most of my work consists of and high-end residential architecture or historic restoration, but I enjoy explorin... Read more

- Capable of meeting deadlines and adapting the project to satisfy the client's desire - Most of my work consists of and high-end residential architecture or historic restoration, but I enjoy exploring new fields - High proficiency in CAD, Revit, and Adobe Suite

I can sit down and grind away at a task until it is done. I've worked on multiple NDA Data Centers for various companies.

I can sit down and grind away at a task until it is done. I've worked on multiple NDA Data Centers for various companies.

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I ha... Read more

I am a dedicated Design Drafter with expertise in Mechanical & Architectural Design. I worked as an AutoCad Drafter for 5 years following school in the granite industry. For the past 3.5 years, I have been in Mechanical Design using Solid Works & Solid Edge. I can produce 2D prints using DraftSight (AutoCad clone). I can also produce 3D models using the aforementioned programs. I can also produce photo-realistic renderings out of CAD models. I recently started my own Freelancing business called Scott Lester Drafting & Design. On the side, I teach Engineering Design at the same community college I graduated from.

Freelance CAD drafter and 3D modeling specialist with 7 years of experience in architectural millwork and tradeshow exhibits. I deliver precise, fabrication-ready shop drawings and 3D models that move... Read more

Freelance CAD drafter and 3D modeling specialist with 7 years of experience in architectural millwork and tradeshow exhibits. I deliver precise, fabrication-ready shop drawings and 3D models that move seamlessly from design to the shop floor. I hold a BST in Architectural Manufacturing Management and Technology. Notable projects include the FIFA Home Depot Backyard Exhibits, Chick-fil-A Campus Headquarters, Caesars Superdome, and The Ned — recipient of the Washington Building Congress Star Award. Software: AutoCAD 2D/3D, Microvellum, SketchUp.

I am an experienced CAD Designer with over 20 years experience in Residential, Commercial and Retail projects. I have worked for several National and Regional home builders both as direct hire and fre... Read more

I am an experienced CAD Designer with over 20 years experience in Residential, Commercial and Retail projects. I have worked for several National and Regional home builders both as direct hire and freelance. I have contributed to teams as well as individual projects that range from initial concepts & Illustrations to complete construction documents and documentation photography. Projects that are unique and require knowledge of the entire lifecycle of the project are those I enjoy best.

I have been 2D and 3D drafting for 10+ years. I have experience in entertainment, home renovation (non structural), furniture etc.

I have been 2D and 3D drafting for 10+ years. I have experience in entertainment, home renovation (non structural), furniture etc.

- Based in GA, USA. Managed to deliver many stormwater network design for small and complex projects in the states of KY, GA, AL, and IN. - Delivered multiple successful hydrologic and hydraulic analy... Read more

- Based in GA, USA. Managed to deliver many stormwater network design for small and complex projects in the states of KY, GA, AL, and IN. - Delivered multiple successful hydrologic and hydraulic analysis for KYTC, INDOT, and GDOT. - Strong knowledge of stormwater management requirements and design (AKA stormwater BMPs). Including design of detention facilities. - Proven proficiency in communication with clients as well as team.

Bachelor's degree in Mechanical Engineering with over 6 years of experience, mainly in the automotive field. During my career, I've taken several projects from sketch and concept to the start of mass... Read more

Bachelor's degree in Mechanical Engineering with over 6 years of experience, mainly in the automotive field. During my career, I've taken several projects from sketch and concept to the start of mass production. As well as working in OEM programs in a Tier 1 supplier company.