Hire Local CAD Designers near Columbia, Maryland

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Scienc... Read more

Drawings to 3D Models of mechanical systems and assemblies are my normal everyday tasks. From engines to firearms, I have the experience you need to complete your task. I have an Associate of Science degree in Engineering from my local community college.

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots... Read more

Hi! I'm Kyle, and I am an Aerospace Engineering student in college. I have interned at Blue Origin and during my time there I did CAD drafting & assembling for very large assemblies. I also have lots of experience with creating photorealistic renderings in Blender using PBR textures. I wont leave you disappointed!

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment w... Read more

I have modeled aircraft and vehicle simulator parts for fabrication as well as machined parts for smaller devices. I have assisted in assembly and testing of flight simulators in a team environment while maintaining parts libraries.

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical de... Read more

I am a Principle Mechanical Design Engineer based in Minneapolis, MN. I have over 25 years of product design experience and can make your ideas come to life in 3D. I own and operate a mechanical design services business. I have 11 US Patents My hourly rate may be a bit higher, but you get what you pay for! Your design is not a place to be cheap. I have been using Solidworks doing intensive design projects since 1997, and used other CAD systems for many years before that (in fact I started with a pencil and a drafting board). I am likely faster and more experienced than most, and can steer your design in the right direction so the parts are manufacturable and as inexpensive as possible.

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industr... Read more

Artist and CADDer (Metal Specific), great at modeling and rendering. Welder/Fabricator 15+ years. Put myself through community college while working to be able to work in the drafting/modeling industry. BricsCAD license, capable but versatile in many other 2D and 3D programs. I work best as a Modeler and Designer.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

Hi, my name is Jason and I am a professionally certified Autodesk Inventor User. I have been using this piece of software for almost a year and have modeled a multitude of projects.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

I am experienced in using CAD & CAM software to develop products from concept to manufacturing using 3D modeling and Machining skills.

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings,... Read more

Hi I’m Jakeytia but everyone calls me Jae. In my field, when it’s hard to visualize new design ideas, my job is to draw and create 3D models, technical drawings, and realistic renderings of buildings, structures, furniture, and lighting, so all aspects of the design can be seen to better make changes or improvements as needed. Industry professionals in architecture, furniture, and design also require accurate dimensions and drawings of spaces, products, and fixtures. My company listens to their needs and will met and exceed their expectations. We give one on one design development, 3D models, technical drawings, and our attention to detail is borderline obsessive because it's our promise to deliver accuracy. Do you need help visualizing a design?

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-effic... Read more

I’m a dedicated PCB layout engineer with 7+ years of hands-on experience turning complex schematics into production-ready boards especially in power-hungry and noise-sensitive applications. High-efficiency SMPS designs (buck/boost converters, GaN/SiC integrations) and mixed analog/digital circuits, like ADC/op-amp interfaces for sensors and IoT prototypes. I’ve routed dozens of boards where EMI control and thermal management aren’t just checkboxes—they’re what keeps your device reliable from prototype to pilot run.

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

2x NASA intern, proficient in all major CAD software, machine design expert with experience in cutting-edge 3D printer development research

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

Patent Illustration | Drafting Intellectual Property IP | Architecture | Engineering | 3-D Modeling & Rendering | Cost Analysis | Product Development & Industrial Design | KYND by Design

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I... Read more

I am a creative and self-motivated mechanical engineer who is passionate about design and particularly interested in design for manufacturing. In addition to a strong mechanical design foundation, I possess strong problem-solving and communication skills. I graduated from UPenn with a degree in Mechanical Engineering and Applied Mechanics in May 2020. While there, I gained tons of CAD, CAM, DFM, & DFA experience (engineers love acronyms, don't they). I have tons of manufacturing experience in addition to my design experience which means that I will save you time and money by creating a manufacturable design in the first place. Outside of freelancing, I am currently working on a startup venture addressing period cramps using a wearable device.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I am a mechanical engineer with experience in machine design, air and water filtration, architectural design, and manufacturing processes.

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential... Read more

I have a BS and MS in Civil Engineering with a focus on structures and over 7 years of experience in structural design and analysis of buildings. My projects as a Project Engineer include residential and commercial buildings not limited to retail stores, industrial buildings, and schools. I can do structural calculations/analysis and prepare construction documents (including plans and detailing). I am licensed in the District of Columbia(PE-Structural), Maryland(PE), and Illinois(SE). I am based out of the Washington DC area and am available for local site visits within driving distance. I have access to a variety of software including but not limited to AutoCAD, REVIT and structural analysis software. I look forward to providing solutions to your engineering needs. Please contact me if you have any questions or require any further information.

Bachelors Degree in Mechanical Engineering 9 Years of Daily work in Autocad Experience in Mechanical Systems Drawings Experience in Plant Layout Drawings

Bachelors Degree in Mechanical Engineering 9 Years of Daily work in Autocad Experience in Mechanical Systems Drawings Experience in Plant Layout Drawings

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions... Read more

I am a seasoned mechanical engineer with a specialty in product design. I have worked on many projects ranging from early prototypes to deliverable products. I am one of only 400 Solidworks Champions in the world which highlights my extensive expertise in the software

For me, product design is not just about solving puzzles. It’s about connecting with people through the things we create and making a product that solves a problem in their lives. I love the process... Read more

For me, product design is not just about solving puzzles. It’s about connecting with people through the things we create and making a product that solves a problem in their lives. I love the process of bringing an idea or a product to the next level, whether I’m creating an industrial design to satisfy the market’s demands, a functional prototype to get people’s attention, or a mass-manufacturable model to bring down costs. In 2013 I bought my first 3D printer as a kit, and used it to start a small business called Mindforge Design. As part of Mindforge, I designed and sold Maryland-themed 3D printed items to the University of Maryland community. Eventually I built a printer of my own which evolved into Readybox, the fastest consumer 3D printer on the market at the time. Readybox had a successful Kickstarter campaign in late 2015, reaching and exceeding its funding goal in only 18 hours. Since graduating in 2017 with a BS in mechanical engineering I’ve been working as a mechanical engineer at Harbor Designs and Manufacturing, where I’ve designed mechanical systems and parts for a multitude of consumer products. I specialize in injection molding and sheet metal design, and in bringing a project from inception through production. Today you can find me designing new products in and out of work every day. With a background in both prototyping and the founding of small businesses, plus experience in product development, CAD design, and multiple types of mass manufacturing, I’m able to guide you through any step of the product design process.

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flash... Read more

I am a Fusion 360/Solidworks designer who has designed things for my school to the US Navy. A few designs I have under my belt are a castle, A cotton candy machine, A working RC boat, and unique flashlight enclosure. I have also designed in sculptress but you probably don't want to hire me for that. If you want to 3D print what I designed (or others) just go to my website. I am soon going to work on designing a 3D printer and am thinking about a organic car design-and getting it printed full scale. I also have a provisional patent for a self closing watch band.

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided i... Read more

Howdy there! I'm a capable designer who's oriented towards industrial, commercial, and life science architecture looking to provide value while expanding his skill set before licensure. I've aided in the successful delivery of multiple projects varying in value from $100,000 to $100 Million and look forward to helping you complete yours!

I started my 2d and 3d modeling journey as a freshman in high school back in 2003. I have learned many 3d programs since then and many manufacturing processes throughout high school and college. Now l... Read more

I started my 2d and 3d modeling journey as a freshman in high school back in 2003. I have learned many 3d programs since then and many manufacturing processes throughout high school and college. Now life takes me in a career of teaching 3d modeling daily to high school students. I would love to create 3d models to help everyday people with everyday problems. I have helped many by creating fixes for existing things and created solutions to many problems family members or colleagues have using 3d modeling and 3d printing. Can’t wait to see what you will have me create!

My name is Nathan Dotts, and I am a Mechanical Engineer. I graduated from Brigham Young University Idaho and currently live in Indiana with my wife and two sons. I have industry experience in food, au... Read more

My name is Nathan Dotts, and I am a Mechanical Engineer. I graduated from Brigham Young University Idaho and currently live in Indiana with my wife and two sons. I have industry experience in food, automotive, automation, and fabrication. My specialty is in the area of product design. I even started my own business, Mechanical Design and Fabrication (https://mechanicaldesignandfabrication.com), to help facilitate the process. We help others to design and fabricate their products. When desired, we can also help others to patent their design. Because of my business and previous experience, I have access to equipment such as machinery and software that aids in the engineering process. If you want something built, I can keep cost and time spent waiting on the lower end because I have the ability to do most everything in-house, all except the heaviest of fabrication processes. A more comprehensive list of previous designs and projects can be seen on my business website included above. However I am happy to include a few projects I am most proud of here: 1. Patented 1972 Ford F100 Custom Suspension Kit - Idaho 2. Patented Uddalok 3-Limb Compound Bow - Illinois 3. Epsilon Laboratory Thermocouple Ablator - Arizona

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my respons... Read more

A Technician with experience in highway design and transportation feasibility studies, as well as environmental planning. I have served as a Technician for numerous highway projects, which my responsibilities have included civil and structural engineering, drafting for preliminary and final design contract documents; cross sections, profiles, roadway alignment sheets; maintenance and protection plans; topographic and planimetric maps; graphic illustrations for promotional presentations and traffic counting. I have been trained in the use of design software packages such as Geopak and Inroads. I also have a strong working knowledge of Bentley and Autodesk products.

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airfra... Read more

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airframe manufacturer. There I learned and used CATIA v4 and was fully trained in CATIA v5. I've spent the last 10 years working in various design roles as an individual contributor and design lead of cross functional teams on simple and complex projects with values exceeding $15 million. I have advanced skills in CATIA v5 in areas of solid modeling, complex surfacing, assembly design, and drafting as well as bill of material and bill of specification creation, modification, and maintenance. I also have intermediate skills in the CATIA v5 kinematics package.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

I have worked professionally designing injection molds, robotic parts, and cases and mounts for sensors, microcontrollers, and other devices for a decade.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

Currently finishing my MS, San Diego based but currently working in Baltimore, MD. Worked on various jets like F/A-18E Super Hornet, F-35C Lightning II and planes like E-2 Hawkeye.

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours... Read more

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours a day, working on schools and other similar buildings, making large sums of money for other people, whilst barely making ends meat for all of my hard work. This is the reason I've decided to go freelance. Coordinating electrical systems in building has become my strong suite. Although I went into CAD classes with dreams of making video games and 3D models, I have not been able to find the right the right company or the right location. Alas, I have continued to build complex 3D models for BIM coordination. But, no more! I’m hoping that if you've found this website you have an idea, maybe a hand drawn sketch or two, or even some old drawings that you’d like to have converted to a digital format. Do you want a replacement for that plastic clip that you broke on your car? Why not let me design it for you in 3D so you can have another one (or as many as you want) 3D printed. My personal website is far from complete at the moment, but I will be sharing all of my projects there (with my clients permission of course) as they come in and/or are under the development process. Feel free to ask questions in the comment section below or shoot me an email at: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ and I’ll be happy to discuss your project with you.

I am a mechanical engineer graduate from the University of Delaware with a very strong background in 3D modeling software, especially Solidworks. I love blending my creative side with engineering to c... Read more

I am a mechanical engineer graduate from the University of Delaware with a very strong background in 3D modeling software, especially Solidworks. I love blending my creative side with engineering to create something unique and special. Let me know how I can help you today!