Hire Local CAD Designers near Aliso Viejo, California

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: En... Read more

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: Engineering Materials, Statistics & Probability, Manufacturing Operations, Dimensional Analysis, Modelling, 3D CAD, Test Analysis, Communication, Prototype Development, Design Improvements and Optimization, Machining and Fabrication Process, Project Management, Materials Research, Troubleshooting, Fabrication, Modeling Contact Daniel regarding design and manufacturing engineering opportunities.

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resource... Read more

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resources, provides an exemplary level of client service through a streamlined, creative and efficient approach to every project. Hands-on and detail oriented, comfortable working with surveyors, engineers, scientists and on unique teams finding cost effective methods for getting projects off the ground and through the pipeline. • Proficiency in Autocad and Solidworks 2017 and newer • Designs include part design and assemblies with prints • Mechanical, architecture, and some electrical architecture • Knowledge of innovative drafting methods • Visually communicative • Familiar with steel welding fabrication practices

I offer reliable CAD and Revit drafting for small architectural tasks: turning basic .dwg plans into Revit drawings with 3D views, CAD redlines and other minor changes. I focus on smaller jobs so I ca... Read more

I offer reliable CAD and Revit drafting for small architectural tasks: turning basic .dwg plans into Revit drawings with 3D views, CAD redlines and other minor changes. I focus on smaller jobs so I can deliver fast turnaround and clean, professional results.

Independent drafter based in Chihuahua, Mexico, specializing in custom residential projects in USA. I have over three years of experience producing detailed architectural drawings, executive projects,... Read more

Independent drafter based in Chihuahua, Mexico, specializing in custom residential projects in USA. I have over three years of experience producing detailed architectural drawings, executive projects, and schedules, as well as high-quality renderings.

3D modeling professional

3D modeling professional

My name is Graham and I am a senior studying Industrial Design at CCA. I have exceptional work experience and a passion for design and 3D modeling. I have excellent visual communication skills, kno... Read more

My name is Graham and I am a senior studying Industrial Design at CCA. I have exceptional work experience and a passion for design and 3D modeling. I have excellent visual communication skills, knowledge of model making, rapid prototyping, and manufacturing techniques. I am proficient with many digital tools, including Solidworks, Rhino, Keyshot, and the Adobe Creative Suite. I’m also well acquainted with the design process and design research.

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference m... Read more

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference materials into official black-and-white line drawings with the high precision required for successful patent applications.   My Core Strengths: Expert Compliance: Extensive experience in meeting strict USPTO standards using Adobe Illustrator.   Precision Engineering: Background in production-ready 3D modeling (Autodesk Alias) ensures every drawing is technically accurate.   Proven Track Record: Successfully developed numerous registered patent drawings (e.g., US D1,087,866 S).   I am committed to providing high-quality technical illustrations that support your intellectual property goals efficiently.

I have a strong technical education foundation and a passion for design. I became certified in Drafting and Engineering Support in Architecture and Civil Engineering and I'm in the process of finishin... Read more

I have a strong technical education foundation and a passion for design. I became certified in Drafting and Engineering Support in Architecture and Civil Engineering and I'm in the process of finishing up a certification in Advanced Manufacturing. I also recently trained with a renowned irrigation professional in irrigation design and am in the process of becoming a Certified Irrigation Technician. Through my education and career, I have become fluent in Adobe Suite, AutoCAD, LandFx, Fusion360, and CorelDraw; and I have specialized in CNC, Laser, Water-jet cutter, 3D printing, and prototyping. I also have 20 years of experience running and managing a successful company in the service industry.

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D f... Read more

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D floor plans, elevations, and section drawings ✅3D modeling in SketchUp & AutoCAD ✅Revit MEP electrical layouts and system design ✅Photorealistic rendering for presentations ✅Electrical drafting for residential and commercial projects ✅CAD Conversion ✅Clash Detection and Animation

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

More than 8 years of experience in SOLIDWORKS designing. From first idea to final product assistance. I WILL MAKE YOUR IDEA A REALITY !

I have 30 years extensive background in Computer-Aided Design, 3D modeling, Model Making, Rendering, 3D part scanning, CNC Programming using Catia. Prototype development from concept to finish product... Read more

I have 30 years extensive background in Computer-Aided Design, 3D modeling, Model Making, Rendering, 3D part scanning, CNC Programming using Catia. Prototype development from concept to finish product. I can translate your models to any cad system via Step, Iges and many other formats. Also can program CNC machines up to 5-Axis. I'm located in Southern California. Worked in all industries. Fast and Reliable. See photos in my profile.

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and constructio... Read more

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and construction drawing preparation.

3D modeling is one of my passions. The composing music. Both allow me to be creative. I enjoy both hard surface and organic modeling. I also love texturing, and using a PBR (Physically Based Rendering... Read more

3D modeling is one of my passions. The composing music. Both allow me to be creative. I enjoy both hard surface and organic modeling. I also love texturing, and using a PBR (Physically Based Rendering) workflow. I'm a pro with Keyshot, and love to get my renders looking as realistic as possible. I'm also a freelance 3D illustrator for ShutterStock and AdobeStock with over 2,700 images in my catalogue.

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contr... Read more

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contract Roles

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photoni... Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the... Read more

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the potential to limit my future well-being. The decision to pursue a degree in mechanical engineering was a logical solution to replicate this enjoyment from working on engines, but also a decision that would provide better future career opportunities. My academic endeavor was less-than conventional, as I was also responsible for a mortgage and funding my own tuition. Although I am married, I am not the type of individual to rely entirely upon my wife with the burden of financial assistance. An unfortunate result of my stubbornness is the notion of accepting an internship, as it could provide an obvious educational value but lacked necessary financial requirements. My participation in on-campus race car teams provided the perfect opportunity to obtain design experience, and to promote these designs in a competitive environment.

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project... Read more

I am a CATIA V5 and SOLIDWORKS mechanical engineer with 6 years of professional engineering experience and 7 years of unrelated project experience. I have proved myself capable of captaining a project from concept to supply chain design and procurement strategy, and would love to do the same for you.

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

I am an experienced exhibit designer working in the design field for over fifteen years. I recently worked as Design Director with Exponents in San Diego for seven years. I have created original modul... Read more

I am an experienced exhibit designer working in the design field for over fifteen years. I recently worked as Design Director with Exponents in San Diego for seven years. I have created original modular designs as well as custom large scaled booth designs. I have also designed high-end custom furniture for a number of architects and interior designers whose clients required new and innovative. I am able to offer you experience as well as a love of current and future trends in our ever changing industry.

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, o... Read more

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, organized, intelligent, motivated, and communicative.

I am a CAD Jewelry Designer | 3D Sculpture Artist with 15 years of experience. To evaluate the quality of my work, please see my web site. 3dwaxcarving.com I have had extensive training in both... Read more

I am a CAD Jewelry Designer | 3D Sculpture Artist with 15 years of experience. To evaluate the quality of my work, please see my web site. 3dwaxcarving.com I have had extensive training in both traditional and digital sculpting. I began my studies as a classical sculptor finishing the Sculpture Art School. After art school, I majored in Industrial Design. Finally, I studied 3D digital modeling at the Art Institute of California in San Diego,CA. During my career, I worked in top Hollywood and video game companies as a lead 3d character modeler. I contributed to major projects such as Dune, Law & Order, Dan Dare, Ever Quest, Deep Space PS3 and others . I studied jewelry design under the tutelage of a San Diego based leading jewelry crafter and manufacturer. My passion is for organic modeling. I always strive to create 3D models that are as lifelike as possible. I work to embody each model with spirit and emotion so that my models have character. I use an eclectic tool-set of modern modeling software to achieve this goal. Currently I am working as an independent 3D Sculpture Artist working with jewelry, gift, video game and other manufactures. For the jewelry industry I create sophisticated organic forms with Faberge quality. For toy and gift manufacturers I create 3d relief sculpture, sculpture miniatures, figurines, belt buckles, Christmas ornaments, and many other products. For video game companies I am modeling and texturing high and low polygon stylized and realistic characters.

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial C... Read more

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial College London, a globally top-10 university. My capabilities include but are not limited to: - Product Design (hand sketches/design conceptualization) - Consulting and Recommendations for Design for Manufacturability, Material Selection, and Manufacturing Methods - Design for Manufacturing – Injection Molding, CNC Machining, Forming, Casting, etc. Mold Design - 3D Modeling - Sheet Metal (3D Model and DXF Files with bends and cut lines) - 3D Simulation and Analysis (stress/strain/fluid flow/volumetric analysis/fatigue analysis/center of gravity/etc.) - Dynamic Motion Simulation - 3D Renderings (Photo Realistic) - 2D Engineering Drawings (ASME Y14.5 Standard) - Assembly Drawings with BOM (Bill of Materials) - Design Specification Drawings - Tech Packs I have launched a freelance mechanical design engineering practice, StellarForged, working with a diverse range of clients—from small startups to established companies. Whether you're tackling a fundamental engineering challenge or navigating a complex problem, I provide the expertise and support needed to drive your success. https://stellarforged.com/

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron i... Read more

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron is able to develop elegant solutions to any problems laid at his feet. Aaron is currently a staff designer at Teveri LLC, where he has created numerous biometric wearables based on a liquid-metal technology that he also played a key role in developing.

Almost 20 years of experience in product design and technical project management.

Almost 20 years of experience in product design and technical project management.