Hire CFD Analysis Designers near Punjab, Pakistan

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in... Read more

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in love to design the concept base models and is always ready to bring creativity in the design out of the way. A guy who is ready to work with company to solve not only to solve the design problems but will bring the creativity in the design through economically as well as the safety point of view. I'll provide you the complete assistance in the FEA analysis in ANSYS workbench under static structural and transient modules of the ANSYS Workbench. I have done FEA analysis on the Cantilever beam under 6 DOF and also on springs for there responses as well as the fundamental frequencies associated with them and also available to do FEA analysis anytime you need me. I have done the FEA of the Spar Design of the Airplane with the beam, jigs and ribs i have lot of work and i can share it as well with the right person.

Mechanical Design Engineer-Expert in 3D Modelling & Analysis Hello, I'm a graduate mechanical engineer with four years of experience in innovative design, analysis, and optimization of mechanical syst... Read more

Mechanical Design Engineer-Expert in 3D Modelling & Analysis Hello, I'm a graduate mechanical engineer with four years of experience in innovative design, analysis, and optimization of mechanical systems. I'm proficient in high-quality, cost-effective solutions to meet project specifications & performance. Proficient in concept design, 3D modeling, drafting, and assembling using industry standards tools Autodesk Fusion360, AutoCAD, and Solidworks. Structural and Thermal-FEA & CFD analysis using ANSYS. Product development from concept to testing. I'm here to bring ideas to exceptional results

Hello! I’m a Mechanical Engineer with expertise in CAD and CFD. I’m proficient in using SolidWorks, Creo, and Ansys. I have a rich experience working as a CAD expert at Sabro Technologies. I offer a... Read more

Hello! I’m a Mechanical Engineer with expertise in CAD and CFD. I’m proficient in using SolidWorks, Creo, and Ansys. I have a rich experience working as a CAD expert at Sabro Technologies. I offer a range of services including: Conversion of an idea into a 3D model Creating models from drawings Creating assemblies and simple parts Rendering Performing FEA and CFD analysis Generating drawings of existing CAD models I have a proven track record in the industry, having modelled chillers ranging in size from 60 to 110 tons and performed analysis on their frames. I have also performed CFD analysis on shell and tube heat exchangers. I look forward to bringing my skills and values to your project!

I am a Mechanical Engineer and CAD Expert with experience of 7 years As a dedicated full-time freelancer, I provide Product Development and Reverse Engineering services to clients. Products and 3D CA... Read more

I am a Mechanical Engineer and CAD Expert with experience of 7 years As a dedicated full-time freelancer, I provide Product Development and Reverse Engineering services to clients. Products and 3D CAD Models including Sheet Metal Designs, 3D Printed Designs, Composite Designs, and Plastic Designs (Injection Molding, Thermoforming). The designs are Validated using Simulation and Mechanical Analysis along with the selection of appropriate materials, and enhance overall design quality. Following prototyping of the Products, I provide comprehensive manufacturing drawings alongside compelling rendered images and animations that vividly showcase product and the assemblies. My approach is driven by efficiency, both in terms of design timelines and costs. I integrate pre-existing manufactured parts and components from a spectrum of suppliers into my designs. By doing so, I ensure not only economical design execution but also preemptive mitigation of redundant manufacturing expenses. All this is presented with meticulous detail, including material selection, Bill of Materials (BOM), and accessible sourced links. In Tight Tolerance Project, I implement Tolerance Analysis in Assembly Design, where I adhere to ISO 286 and ISO 2768 Tolerance standards. For accurate and precise manufacturing, I use ASME Y14.5 GD&T in manufacturing drawings. Feel Free to contact me regarding your project and I will be glad to share my insight. My diverse project history includes: • Product Design encompassing metal, plastic, and composite materials • Designing 3D Printed Components • Plastic Injection Molded Designs • Automotive Parts with Precision • Sheet Metal Designing • Composite Mold Designs • Plastic Design Solutions • Part Designs for Machining Processes My capabilities also extend to the domain of transforming 3D Scans into robust 3D CAD Models: # 3d Scan Alignments and Registration/Merging # 3d Scan Data, Mesh Data and Point Cloud Data optimization # Conversion of 3D Scan Data to 3D CAD Model # STL, XYZ, PLY to STEP # Accurate CAD Model with Deviation Analysis # 2D Drawings from 3D Scanned Data # Area, Volume Calculations, and Inspection of 3D Scan Data # 3D Scan and 3D CAD Comparison report # 3D Scan Data to Assembly model # 3D Scan to Mold Designs of parts Mechanical Analysis and Simulations; 1. Design Strength analysis to find the factor of safety under loads. 2. Structure Designs Analysis for Load distributed to Foundation. 3. CFD Analysis for Drag, lift forces. 3D Printed Parts: # 3D Printed Enclosures or Casings for Electrical and Electronic PCB devices # 3D Printed Gadgets # 3D Printed parts for Machines such as gears, brackets. # 3D Printed parts for Products and Prototypes Softwares I use; 1. SolidWorks / SolidWorks Simulation 2. Catia 3. Geomagic Design X 4. Meshmixer 5. Creality Slicer 6. Keyshot Deliverables: 1. .OBJ, .STL .STEP, .IGES, X_T (Parasolid) etc formats 2. SolidWorks, Inventor, Creo, and Catia formats 3. 2D Drawings in .dwg, PDF, DXF 4. Rendered Images 5. Rendered Animations

I am a Professional Mechanical Engineer with a lot of experience in design and modeling, with this experience I came up with these skills: 1. Mechanical Design: 3D designing including all parts and a... Read more

I am a Professional Mechanical Engineer with a lot of experience in design and modeling, with this experience I came up with these skills: 1. Mechanical Design: 3D designing including all parts and assemblies. Creating assembly drawings with BOM, production drawings, and drawings for other purposes. 2. 3D Modeling: Complete 3D design of the product, solid model, or surface modeling based on the sketches, pictures will be provided in any file formats as per your needs. 3. 2D Drafting: It includes the creation of 2D Drawings or Updating them. like layout drawings, MEP Drawings, Fabrications, etc 4. 3D Rendering: it includes the commercial renderings and 3d animations to be used on the webpages, ads, or catalogs, etc. 5. Simulation: it is the computer-based method to get the numerical solution of the problem, I use ANSYS for that, I will do FEA, Stress, Deformations Fluent, and CFD Analysis.

Warm Greetings !!! . I have done Mechanical Engineering. If you are looking for help in Mechanical engineering tasks like problem-solving, semester projects, subject problem’ solutions then you are in... Read more

Warm Greetings !!! . I have done Mechanical Engineering. If you are looking for help in Mechanical engineering tasks like problem-solving, semester projects, subject problem’ solutions then you are in the right place. I can solve numerical problems, tasks, and projects related to Mechanical engineering subjects. I am here to assist you with all tasks related to Mechanical Engineering. I am having expertise in the following subjects and software.  Thermodynamics  Heat Mass Transfer  Power Plants  IC Engines  HVAC  Mechanics of Materials  Differential Equations  Vector and Calculus  Engineering Statics  Engineering Dynamics  Machine Design  Robotics and Controls  Industrial Management System  Production Operation Management  Finite Element Analysis  Mechanical Vibration  Energy, Resources, and Utilization  Engineering Statistics  Project Management SOFTWARE:  MATLAB /SIMULINK  ANSYS  SOLIDWORKS  AUTOCAD  LTSPICE  LABVIEW  ETAP  FEM  PROTEUS  CFD  HAP Thermodynamics: • First Law of Thermodynamics • Second Law of Thermodynamics • Zeroth Law of Thermodynamics • Enthalpy • Entropy • Rankine Cycle • Otto & Diesel Cycle • Brayton Cycle Heat & Mass Transfer: • Heat Transfer in one dimension • Heat Transfer in two dimensions • Heat Transfer through conduction, convection & radiation • Hydrodynamics • Methods of dimensional analysis • Lumped capacitance method --------------------------------------------------------------------------------- • Evaporation • Distillation & mass transfer • Absorption & Adsorption • Drying • Leaching & mass transfer • Liquid-Liquid Extraction • Cooling Towers • Ternary diagram in mass transfer • Separation process • Heat Transfer • Mass transfer • Thermodynamics Fluid Mechanics: • Reynold's number • Bernoulli's Equation • Equation of Continuity • Pascal's Law in Fluid Mechanics • Pumps design • Aerodynamics • Dimensional Analysis in Fluid Mechanics HVAC System & Design: • HVAC Heating & cooling load calculations • Duct Sizing & Routing • HVAC Schematics • HVAC design • AutoCAD layouts & drawings • Chiller Selection & Piping Design • Other Plumbing Design (Loops, Steam and Air) Mechanics of Materials: • Stress • Strain • Mechanical Properties of Materials • Axial Load • Torsion • Bending • Transverse Shear • Combined Loading • Stress Transformation • Strain Transformation • Design of Beams and Shafts • Deflection of Beams and Shafts • Buckling of Columns Finite Element Analysis: • Beam and Spring System • Truss’s structure • Frame Analysis • Minimum potential energy principle • Galerkin method • Transformation of Element Equations from Local to Global CS • Eigenvectors and eigenvalues of the stiffness matrix • Iso-parametric Formulation • FEA Simulation • FEA in Fluid Dynamics • 2D and 3D structure • FEA question solution with MATLAB • Model Creation on ANSYS Computational Fluid Dynamics: • Mesh generation in ICEM, FLUENT MESHING MODE, ANSYS WORKBENCH (Modules for CFD) • The structured and unstructured meshing of complex geometries for CFD analysis • CFD analysis using Ansys Fluent for External and Internal flows • Fluent and Static Structural Analysis in order to carry Fluid Solid Interaction (FSI) simulations (a type of combination of SS and CFD analysis or several others) • Dynamic/ Adaptive Meshing to incorporate moving geometries within fluid interactions for CFD analysis • UDF compilation and Application on Geometries while analyzing computational fluid dynamics Mechanical Vibration: • Free Vibration • Forced Vibration • Harmonic Vibration • Viscous Damping • Modeling and Energy Methods • Stiffness • Stability • Coulomb Friction • Harmonic Excitation of damped and undamped systems • Alternate Representation • Base Excitation • Forced Response • Multiple Degree of Freedom Systems • Eigenvalues and Natural Frequencies • Modal Analysis • Mode Shapes • Lagrange’s Equation • Eigenvalue Problem for Vibration • Vibration Absorbers • Vibration Isolation Control System: • Feedback & Control System • Open loop & Close Loop Control System • Transfer Function • Block Diagram Model • Signal Flow Graphs • State Space • Nyquist Plot • Body Plot • PD, PI, PID Controllers Design • Root Locus • Controller Design & MATLAB Simulink • Laplace and Inverse Laplace Transform • Transfer Function • Steady State Error and Transient Response • Lead/Lag Compensator Design • Modelling in Time/Frequency Domain • Design & Stability of Control Systems • Phase & Gain Margins • Advanced Control System • System Modelling

am a Mechanical Engineer with 5 years experiences and also a Solidworks professional. What you can have in this gig. New Product Development 3D models/ 3D Images High Quality product images Prototy... Read more

am a Mechanical Engineer with 5 years experiences and also a Solidworks professional. What you can have in this gig. New Product Development 3D models/ 3D Images High Quality product images Prototypes STL / 3D Printing STEP/ IGES files Bill of Material (BOM) Simulation Reports Sheet Metal Mold designing Assembly 2D Drawings eDrawings Animations Electronic Parts Home and Furniture Modification for existing parts Physical shipping available for designed and Machined parts in Steel or Aluminum Regarding ANSYS Services provided 1. steady state CFD Analysis 2. transient analysis 3. multiphase flow 4. heat transfer 5. combustion and species transport 6- Finite Element Analysis 7- Thermal and Heat Transfer Analysis 8- Buckling and Fatigue analysis 9- Structural Analysis 10- Flexible Dynamics 11- Mems Multiphysics analysis 12- Electromagnetism analysis 13- all data and results need (contours, Excel, Graphs)

Hello, My name is Muzammil Kamal. I'm a Mechanical Engineer-Graduate. I am using solid work, AutoCAD. I Can help you to make all parts for 3d cad and 2d cad. I will make it Faster and accurate like as... Read more

Hello, My name is Muzammil Kamal. I'm a Mechanical Engineer-Graduate. I am using solid work, AutoCAD. I Can help you to make all parts for 3d cad and 2d cad. I will make it Faster and accurate like as your Request and on schedule. I can make 3d Cad and 2d Cad from your picture or sketch with dimensions. I can Remake your files in STL format. ✅ Mechanical parts ✅ Parts Assemblies ✅ Extruded parts ✅ Automotive parts ✅ 3D parts ✅ 2D and 3D Sketch ✅ Structural Analysis (Stress analysis, Thermal analysis) ✅ Mesh Generation ✅ Study Motion (3D Animation/Simulation) I hope I can help you to finish your project. I am ready for long-term project and full-time project. Please look at my portfolio. I want to get good feedback from their customers. Thank you in advance for your time and consideration. I look forward to working with you soon!!! Best Regard Muzammil Kamal

I am a mechanical engineer specializing in Mechanical design and product development (4 years of experience). Currently I am working in an automotive company. I have skills in mechanical/structural de... Read more

I am a mechanical engineer specializing in Mechanical design and product development (4 years of experience). Currently I am working in an automotive company. I have skills in mechanical/structural design, CAD/CAE software; Catia, Solidworks, Creo, Autocad, Ansys, Abaqus and thermal simulation/analysis.