Hire CAD designers & engineers in Klang, Selangor

Hey, I am Imran. _ I believe in the creative power of design. I also trust that everybody is naturally creative. And so I strive to give ideas form: to give each a chance to delight, to reform, to... Read more

Hey, I am Imran. _ I believe in the creative power of design. I also trust that everybody is naturally creative. And so I strive to give ideas form: to give each a chance to delight, to reform, to make this world better, if only slightly. _ My interest lies in new technologies of all sorts. I take care of: • Concept sketching in 2D • Modelling and rendering in 3D • Class A surfacing • Manufacture-ready design • Packaging engineering Certified human-centered design practitioner with over ten years of experience, I am on Wareslab.Com and ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Hi, I am Hamed Alikhani I have more than 8 years of experience in Mechanical Design, Manufacturing, reverse engineering.I worked with many software but, my favorite software is Solidworks, my solidwor... Read more

Hi, I am Hamed Alikhani I have more than 8 years of experience in Mechanical Design, Manufacturing, reverse engineering.I worked with many software but, my favorite software is Solidworks, my solidworks skills are part design. Advanced Assembly, sheetmetal design and drafting for laser cut, surface design and structural design. I also do architectural modeling and realistic rendering for both exterior and interior spaces. I also have experience in Rhino3D in field of membrane and tensile fabric structures and tent design. I use FORTEN software for this type of work too. I like challenges every day!

My interest on 3D modelling makes me want to learn more and more on it! From hobby its turn to freelance for 3D modelling, 3D jewelry and 3D art. I begin in product design before jump into all these t... Read more

My interest on 3D modelling makes me want to learn more and more on it! From hobby its turn to freelance for 3D modelling, 3D jewelry and 3D art. I begin in product design before jump into all these thing and will try to improve my skills time by time.

I am full time freelancer as CAD Designer with 6 years CAD design experience. My major field in checking fixture jig design for automotive parts. I would like bring excellent experience & my knowledge... Read more

I am full time freelancer as CAD Designer with 6 years CAD design experience. My major field in checking fixture jig design for automotive parts. I would like bring excellent experience & my knowledge in new profession as freelancer. Below are some hightlights of my background :- 1) 4 years experience in tooling design (checking fixture jig). Involve design project with several automotive company such as PROTON, PERODUA, HONDA, TOYOTA. I'm also do reverse engineering with aircraft company (Malaysia Airlines Berhad) 2) 2 years experience in product design (automotive part). Involve in design HVAC UNIT ASSY (vehicle aircond system) & SEAT ASSY for automotive company (PROTON) With proven knowledge in designing's systems, i will deliver successful skill & design task for client come with GOOD price & GOOD leadtime. My Point of view :- DESIGN FOR THE FUTURE Thank you and Regards FAIZAL MOKHTAR

Hi, I’m Shalz! I specialize in creating intricate 3D models, primarily using SolidWorks. In addition to SolidWorks, I also offer services in AutoCAD, Inventor, and various simulation software, ensurin... Read more

Hi, I’m Shalz! I specialize in creating intricate 3D models, primarily using SolidWorks. In addition to SolidWorks, I also offer services in AutoCAD, Inventor, and various simulation software, ensuring a comprehensive approach to design. As a helpful designer with a solid understanding of design principles, I’m dedicated to bringing your ideas to life with precision and creativity.

Hi, my name is Amirul. What I do: - Architectural Design - Interior Design - Furniture design - Furniture details drawing - 3D Rendering and Visualization - 3D Modeling

Hi, my name is Amirul. What I do: - Architectural Design - Interior Design - Furniture design - Furniture details drawing - 3D Rendering and Visualization - 3D Modeling

I am a mechanical design engineer with 13+ years of experience in Autodesk Inventor and Autocad. For the past 13 year i'm been design a various product such as : -sheet metal product -street... Read more

I am a mechanical design engineer with 13+ years of experience in Autodesk Inventor and Autocad. For the past 13 year i'm been design a various product such as : -sheet metal product -street furniture product -office furniture product -machine design (mixer, disperser, filling machine, solvent recovery machine) - tank and vessel - etc.

Hello I’m a structural design engineer with more than ten years of experience in designing buildings and structures. After many years of cooperating with international companies, I decided to start my... Read more

Hello I’m a structural design engineer with more than ten years of experience in designing buildings and structures. After many years of cooperating with international companies, I decided to start my own business. So, I just began working with some of my professional friends, and although I created “Coworking Engineering Services” in the following. Our experienced team collaborates closely with you about all kinds of steel structures such as buildings, bridges, space frames, trusses, towers, stairs, and handrails, etc. To be Handling many projects from the design stage to final production, we’ve become fully acquainted with the requirements of the clients in the preparation of drawings and will provide all the documents that will be necessary to create the modeled piece. In addition to it, we could provide your shop drawings and details for the structures that you may design and calculate their complex parameters in SolidWorks, Inventor, Advance Steel, Tekla, etc. According to our abilities, I believe we can have a successful and long-term cooperation. To become sure about our abilities, we are willing to start a project with you. In this way, you can be assured about our team and you can give over your future projects to us. By considering our experience there is no reason to be worried about your projects and CONSIDER THEM DONE.

Graduate in Bachelor Product Design Engineering

Graduate in Bachelor Product Design Engineering

A mechanical engineer experienced plastic part designs, engineering analysis and product development to mass production.

A mechanical engineer experienced plastic part designs, engineering analysis and product development to mass production.

Over a decade experiences Industrial/Manufacturing Design. Design and fabricate from furniture, playground equipment, Steel equipment, structure and now on theme parks items From 3D to Technical and f... Read more

Over a decade experiences Industrial/Manufacturing Design. Design and fabricate from furniture, playground equipment, Steel equipment, structure and now on theme parks items From 3D to Technical and fabrication drawings.

𝗜 𝘀𝗽𝗲𝗰𝗶𝗮𝗹𝗶𝘇𝗲 𝗶𝗻 𝘁𝘂𝗿𝗻𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗶𝗱𝗲𝗮𝘀 𝗶𝗻𝘁𝗼 𝘀𝘁𝘂𝗻𝗻𝗶𝗻𝗴 𝟯𝗗 𝘃𝗶𝘀𝘂𝗮𝗹𝘀. ● Let me bring your product, design, or idea to life through high-quality 3D renderings. ● Working remotely, I can create 3D models and p... Read more

𝗜 𝘀𝗽𝗲𝗰𝗶𝗮𝗹𝗶𝘇𝗲 𝗶𝗻 𝘁𝘂𝗿𝗻𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗶𝗱𝗲𝗮𝘀 𝗶𝗻𝘁𝗼 𝘀𝘁𝘂𝗻𝗻𝗶𝗻𝗴 𝟯𝗗 𝘃𝗶𝘀𝘂𝗮𝗹𝘀. ● Let me bring your product, design, or idea to life through high-quality 3D renderings. ● Working remotely, I can create 3D models and provide photo-realistic renderings. ● With over a decade of experience, I understand exactly what clients expect from their design visualization images. At Rasam3Dstudio, I lead a team of skilled 3D artists who enhance our project efficiency. ::: 𝗘𝘅𝗽𝗲𝗿𝘁𝗶𝘀𝗲 ::: - Architectural Design - Exterior/Interior 3D Visualization - Product 3D Rendering/Modeling - Animation ::: 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 𝗣𝗿𝗼𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 ::: - 3Dsmax - V-Ray - Chaos Vantage - Substance 3D Painter

Graphic Designs 3D modelling - Maya, Sketchup, Rhino, AutoCAD (2D) Working online in freelancer basis for almost 7 years - mainly in graphics, partly in 3D development.

Graphic Designs 3D modelling - Maya, Sketchup, Rhino, AutoCAD (2D) Working online in freelancer basis for almost 7 years - mainly in graphics, partly in 3D development.

28 Designer

28 Designer

Working as Application Engineer with SolidWorks more than 8+ years, mainly in 3D design analysis, technical documentation and render model. I believe with my experience and advance design skills, I ca... Read more

Working as Application Engineer with SolidWorks more than 8+ years, mainly in 3D design analysis, technical documentation and render model. I believe with my experience and advance design skills, I can contribute and giving strength to the organization and strive together toward to the same goals.

I started working a decade ago from a small speaker box manufacturer, to big multinational ODM companies such as Dyson, BigAssFans U.S, Range International, and JVC. My extensive experience from small... Read more

I started working a decade ago from a small speaker box manufacturer, to big multinational ODM companies such as Dyson, BigAssFans U.S, Range International, and JVC. My extensive experience from small to big company has covered a lot of technical knowledge and delivered good products to the market. Therefore, my portfolio will not be as detail, as I am bound to confidentiality obligation. For the past decade, I have been exposed to small to large tonnage plastic part and assembly, and also tooling design. Some has complex sequential slider and lifters. Along the way, I am also designed and successfully manufactured rubber parts, sheet metal and wood parts and assemblies. If you are looking for someone to bring new ideas to life, bring innovation to mass production, you have found a match. I have delivered new technologies to market, which required strong design skill, process knowledge, good test procedures for reliability and accurately identify Critical To Quality items. If you are looking for someone to help your journey from prototyping to mass production, any stage of it, you are welcome as well.

- More than 8 years on Oil and Gas Sectors Engineering Design - Proficient on Engineering Part design with good mechanical tolerance understanding as know how on CNC and Conventional Machine capabilit... Read more

- More than 8 years on Oil and Gas Sectors Engineering Design - Proficient on Engineering Part design with good mechanical tolerance understanding as know how on CNC and Conventional Machine capabilities - Good knowledge on material selections as well as elastomer, engineering plastic, metallic and alloy materials - Excellent on end products hard facing, coating and surface protections requirements and specifications - Proficient on Solidworks - Good understand on API, ANSI, ASME, JIS standards on pipeline design - Average knowledge on PLC design as well as process automation design - Major on industrial automation on process and layout optimization with published paper https://www.scientific.net/AMM.315.755

Hi, I am Ahmad Annasaai Osman professional Design from Malaysia. A well-educated person and highly motivated when comes to work time frame. I have gathered enormous efficiency in various editing tool... Read more

Hi, I am Ahmad Annasaai Osman professional Design from Malaysia. A well-educated person and highly motivated when comes to work time frame. I have gathered enormous efficiency in various editing tools that are helpful in creating any strong design by using; - AutoCAD - AVEVA Marine Outfitting (Piping) - Sketch Up - Adobe illustrator - Photoshop - Canva My working experiences in the various field (Quality Assurance Quality Control, Construction, Production, Engineering, Procurement, Designer) it has helped me to develop a technical skill that mastered in others software such as Microsoft PowerPoint, Microsoft Word, Microsoft Excel, Microsoft Project, Adobe Acrobat). My service included but not limited to; - As-Built Drawings - Approved For Construction Drawing - Piping Isometric Drawing - Graphic Design - Logo - Photo Editing - Data Entry - Virtual Assistant - Copywriting - Ghostwriting - Minute Meeting - Planning and Scheduling When I take any project in my hand, I would like to give it my 100% commitment and try to do my best work to fulfill my client's requirements. I'm still a keen learner who wants to create more new ideas and never hesitate to learn new things. I look forward to hearing your feedback. Please feel free to contact me if you are interested in hiring me. Thank you.

I'm a dedicated professional guy who have proven work experience as a Drafter in the last 7+ years of experience Hands-on experience with computer-aided design (CAD) software Familiarity with 3D mod... Read more

I'm a dedicated professional guy who have proven work experience as a Drafter in the last 7+ years of experience Hands-on experience with computer-aided design (CAD) software Familiarity with 3D modeling tools Good math skills Ability to meet deadlines BSc in Engineering, Machenical or degree from a technical college

As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest technology in this industry and make the best use of my education, acquired skills a... Read more

As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest technology in this industry and make the best use of my education, acquired skills and experience for personal and organisation growth.

I was an engineer that worked in the Oil & Gas field for about 6 years. Currently I am working as Solidworks 3D drafter in Hytex Engineering Works which specialize in machining tools and CNC machining... Read more

I was an engineer that worked in the Oil & Gas field for about 6 years. Currently I am working as Solidworks 3D drafter in Hytex Engineering Works which specialize in machining tools and CNC machining. My job scope there is to produce 3D model and fabrication shop drawings as per client requirement for manufacturing. Aside from Solidworks & AutoCAD experience, I am also have knowledge in manufacturing process such as welding standard and machining practice. If you're a person that are developing your product, I am able to offer you service as below: 1) 2D to 3D conversion 2) Iterating the 3D model design 3) Shop Drawing preparation as per client requirement 4) Generating BOM for MTO. 5) Material Cutting Plan for Plate and Section Members I am able to hold the conversations in English & Chinese. Therefore there is no problem in communicating with me

3 years experience in drafting, modelling, 3d scanner & 3d printer. willing to help & share experience together.

3 years experience in drafting, modelling, 3d scanner & 3d printer. willing to help & share experience together.

Designing Sheet metal at solidwork(furniture) Basic at autocad and inventor Basic design at machine part

Designing Sheet metal at solidwork(furniture) Basic at autocad and inventor Basic design at machine part

I am a CAD enthusiast and always ready for a challenge. I specialize specifically in SolidWorks and I was bestowed a certification from CADD Centre in this software. Besides being a student, I invent... Read more

I am a CAD enthusiast and always ready for a challenge. I specialize specifically in SolidWorks and I was bestowed a certification from CADD Centre in this software. Besides being a student, I invent and design my own ideas into reality. This is not my first freelancing job, so in conclusion I do have some experiance in this field of work. I do carry out certain tasks in Autocad also. I do have some design experience as I have joined several competitions regarding it, and I have also done an exhibition before as a finalist.

Currently work as a Design Engineer for RAPID Petronas Project for Fire Fighting Work Scope.

Currently work as a Design Engineer for RAPID Petronas Project for Fire Fighting Work Scope.

-Experienced Mechanical Engineer with various machine completion and handovers. -Have completed automation machines in factory production and OEM products. -A certified Mechanical Engineering graduate... Read more

-Experienced Mechanical Engineer with various machine completion and handovers. -Have completed automation machines in factory production and OEM products. -A certified Mechanical Engineering graduate from Malaysia

A Technical Reseacher with 4 year experience. My strength on Machine Design using Solidwork for CAD Design and Ansys Fluent as analysis tool. Received outstanding Award in Innovation 2017 from Unive... Read more

A Technical Reseacher with 4 year experience. My strength on Machine Design using Solidwork for CAD Design and Ansys Fluent as analysis tool. Received outstanding Award in Innovation 2017 from Universiti Kuala Lumpur,Malaysian Spanish Institute, Malaysia.