Hire Local CAD Designers near Bareilly, Uttar Pradesh

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goal... Read more

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goals. My strengths include great electrical designing skills, people and time management, strong communication and interpersonal skills. I am a go-getter and work hard to achieve my goals. I am a diploma holder in electrical engineering with more than 20 years of experience and since 2000 I am working for a US based multinational automation company, which mainly deals with AC Drives, DC Drives, Higher rating thyristor bridges, MCC, PCC, Capacitor panel, CLX panels and Flex I/Os panels. Through this rich experience I have gained good knowledge in electrical switch gears and various electrical standards like NEMA and IEC. Also I realize the value of customer satisfaction and trust. I am specialized in designing layout diagrams (GA and IGA), SLD, Schematic diagrams, Cable tray layouts, Room layouts and Bill of Materials for all kinds of electrical panels. I do the panel sizing, switch gear selection and cable schedules independently. I am also an expert in designing control scheme (Ladders) for interlocking of power and control circuits. For schematic drawings I use all the features in AutoCAD electrical.

I am a hardcore designer.. I have perfected my skills through a lot of practice. I keep my word and respect deadlines. I am currently pursuing my bachelors degree from MNNIT Allahabad from mechanical... Read more

I am a hardcore designer.. I have perfected my skills through a lot of practice. I keep my word and respect deadlines. I am currently pursuing my bachelors degree from MNNIT Allahabad from mechanical engineering.

Certified in AutoCAD by college and 1st prize in Design Competition. Self-prepared in Solidworks. Certified in Solidedge-CAD/CAE and NX-CAD/CAM/CAE by SIEMENS PLM. Self-preparing in ANSYS-CAE. Cer... Read more

Certified in AutoCAD by college and 1st prize in Design Competition. Self-prepared in Solidworks. Certified in Solidedge-CAD/CAE and NX-CAD/CAM/CAE by SIEMENS PLM. Self-preparing in ANSYS-CAE. Certified by FABLAB in Additive Manufacturing in 3D printing technology (STRATASYS F370 & Makerbot). Fresher, no experience in the industry level.

Architect and Interior Designer

Architect and Interior Designer

I am a Mechanical Engineer.i have 8+ years of industrial experience in product design. My experience is 3d modeling,drawing,detailing and technical documentation. I work on metallic or non metall... Read more

I am a Mechanical Engineer.i have 8+ years of industrial experience in product design. My experience is 3d modeling,drawing,detailing and technical documentation. I work on metallic or non metallic type of part. i will deliver your product for 3d printing or manufacturing purpose. i will use my best effort to deliver your product as per your requirement. Your suggestions are welcome. Thank you

i'm certifeid cadd center

i'm certifeid cadd center

I am b.tech mechanical 3rd year student in dayalbagh Educational Institute. Presently i have done the advance level certification course in autocad and also persuing fusion 360 software course present... Read more

I am b.tech mechanical 3rd year student in dayalbagh Educational Institute. Presently i have done the advance level certification course in autocad and also persuing fusion 360 software course presently. I am hard working and workaholic person

I am a Mechanical Design Engineer providing professional CAD and mechanical design services for manufacturing, fabrication, and product development. I work with SolidWorks, AutoCAD, Creo, NX (UG), a... Read more

I am a Mechanical Design Engineer providing professional CAD and mechanical design services for manufacturing, fabrication, and product development. I work with SolidWorks, AutoCAD, Creo, NX (UG), and Autodesk Inventor to help clients convert ideas, sketches, PDFs, and 2D drawings into accurate, manufacturing-ready 3D models and drawings. My approach focuses on clean design intent, practical features, and outputs that can be used directly for machining, fabrication, or production. I have hands-on experience with: - 3D part and assembly modeling - Sheet-metal and machined components - 2D drafting and detailing - Design modification and optimization - Manufacturing-oriented CAD documentation I support clients on a project-based basis, offering reliable CAD assistance for short-term or overflow design work. Clear communication, accuracy, and on-time delivery are always my priorities. Software Expertise: • SolidWorks • AutoCAD (2D & basic 3D) • Creo Parametric • Siemens NX (UG NX) • Autodesk Inventor Services I Offer • SolidWorks 3D Part Modeling • Assembly Modeling • AutoCAD 2D Drafting & Drawings • 2D to 3D Conversion • PDF / Hand Sketch to CAD • Manufacturing Drawing Preparation • Basic Design Modification & CAD Support If you need dependable mechanical CAD support using any of the above tools, feel free to contact me. I’ll be happy to review your requirement and suggest the best approach.

I am a Mechanical & Design Engineer with a passion for creative & Innovative design. I have 10 years of experience as a designer/engineer in DUBAI, currently working full time for running my business... Read more

I am a Mechanical & Design Engineer with a passion for creative & Innovative design. I have 10 years of experience as a designer/engineer in DUBAI, currently working full time for running my business managing a team of engineers and designers. We are Mostly covering the Gulf & US Companies currently & providing them the best quality assurance of work. I actively participate in every project we take on as my true passion is in design.I have a background in Mechanical Engineering degree as well as master Diploma in Design and try to apply Creativity principles into my designs. As a Designer I am expert l in most aspects of design and am highly proficient in 3d modeling and CAD design. I try to be realistic with my timelines and bidding projects. When I commit to do a project I am make sure that it is completed on time. I will not finish any assignment until the client is 100% satisfied. As an engineer I have expertise in: Product Design & Industrial Design, Interior Design, Decorative Design, 3D Design, Modelling & Rendering, Furniture Design, Web design & Development Including Graphic Design & Automotives Design.

I m mechanical engineer with expert in CaD designing. I have Expertise in AutoCAD, pro-E , CNC programming.

I m mechanical engineer with expert in CaD designing. I have Expertise in AutoCAD, pro-E , CNC programming.

I am a professional designer practicing as an architect from the past 4 years and i have worked on quite a few projects ranging from residential , commercial and mixed use. One of my favorite projects... Read more

I am a professional designer practicing as an architect from the past 4 years and i have worked on quite a few projects ranging from residential , commercial and mixed use. One of my favorite projects was working on a statue project which remains one of my favorite works due to the inch by inch differing details in there.

Industrial Designer with more than 6 years of experience. worked with numerous startups and micro businesses. My experience includes but not limited to : 1. Consumer electronics, (Wearables, Startups... Read more

Industrial Designer with more than 6 years of experience. worked with numerous startups and micro businesses. My experience includes but not limited to : 1. Consumer electronics, (Wearables, Startups with different ideas, PCB Enclosures) 2. Electric Vehicles. (2-wheeler, 3-wheeler, 4-wheeler) 3. Gym Equipment Design 4. Concept Design. 5. Reverse Engineering (Military equipment) 6. 3D Printing 7. Ecommerce Product Listing (Product Renders). 8. Industrial Equipment. 9. Medical Device Design Softwares I use : - Autodesk Inventor - Autodesk Fusion360 - Autodesk AutoCAD - Solidworks - Keyshot

I am a certified CAD Designer with 2+ years of experience in AutoCAD and SolidWorks, specializing in 2D drafting, 3D modeling, and product design. Currently pursuing B.Tech in Mechanical Engineering,... Read more

I am a certified CAD Designer with 2+ years of experience in AutoCAD and SolidWorks, specializing in 2D drafting, 3D modeling, and product design. Currently pursuing B.Tech in Mechanical Engineering, I bring both technical knowledge and practical design skills. ➢Autocad ➢SolidWorks I have completed an internship at Ashok Auto Sales (Tata Motors), where I worked on real-world automotive projects. My expertise includes product modeling, rendering, assembly design, GD&T, and manufacturing-ready drawings. I focus on delivering accurate, high-quality, and client-oriented designs within deadlines. From concept to final detail, I ensure every project is precise, functional, and visually clear.

Enjoy designing while enhancing skills, and trying to achieve professional and academic excellence.

Enjoy designing while enhancing skills, and trying to achieve professional and academic excellence.

i am mechanical engineer expert in cad software like Auto cad mechanical 2D and 3D, solidworks and siemens Nx (part modeling, sheet metal, assembly, drafting etc.)

i am mechanical engineer expert in cad software like Auto cad mechanical 2D and 3D, solidworks and siemens Nx (part modeling, sheet metal, assembly, drafting etc.)

i am blender artist as well as a solidworks mechanical design engineer I am a certified solidworks professional by Dassault systems itself (CSWPA) on the following criteria:- Sheet metal design Surf... Read more

i am blender artist as well as a solidworks mechanical design engineer I am a certified solidworks professional by Dassault systems itself (CSWPA) on the following criteria:- Sheet metal design Surface modelling Engineering drawings Mold design Weldment profiling My previous work with other clients covered mostly all design aspect such as ,solid modelling ,surface modelling , assembly modeling , and vehicle designing .

Hi, I am working as Mechanical Design Engineer. I have 4 years of experience in the position, during which I’ve become an expert in CAD software. With this experience and expertise, as well as my dr... Read more

Hi, I am working as Mechanical Design Engineer. I have 4 years of experience in the position, during which I’ve become an expert in CAD software. With this experience and expertise, as well as my drive to continually learn and develop my skills, I am confident that I could fulfill your requirements. My professional experience includes designing, developing, reverse engineering, drawing and fabrication process. The following are my most relevant skills and qualifications: A good team leader. Expert in CAD software Expert in CATIA, SOLIDWORKS, PTC CREO AND AUTOCAD. In addition to these technical skills, I am punctual, passionate and a great communicator. Thank you Sincerely, Vivek Upadhyay

13 Years of total experience as a mechanical design engineer. Expertise in Siemen's NX, solidworks, Autocad and Ansys.

13 Years of total experience as a mechanical design engineer. Expertise in Siemen's NX, solidworks, Autocad and Ansys.

I am a design enthusiast,specialise in automotive components,electrical components and anything that has wheels!!!!!

I am a design enthusiast,specialise in automotive components,electrical components and anything that has wheels!!!!!

Hi, I am a Mechanical engineer. I have done specialization in the field of design and analysis. Now along with having creativity, I design products based on which follow laws of mechanics, taking good... Read more

Hi, I am a Mechanical engineer. I have done specialization in the field of design and analysis. Now along with having creativity, I design products based on which follow laws of mechanics, taking good care of looks as well. To create my ideas into a virtual world, I use AutoCAD to create 2D sketches and do drafting work, and to create a 3D model, I use Solidworks. Now that I have practiced for quite some time, I have a great hand on Solidworks thus, I can create a complex design easily.

"I am a mechanical engineer by education and a CAD enthusiast by passion." i use autocad and solidworks to do most of my work assignments, but have a good hand on other CAD platforms like PTC creo el... Read more

"I am a mechanical engineer by education and a CAD enthusiast by passion." i use autocad and solidworks to do most of my work assignments, but have a good hand on other CAD platforms like PTC creo elements & CATIA V5. With a working knowledge of adobe Photoshop, I can also add an extra charm to my rendering works.

➢Plastic design in automotive industry in (Cero, Solid works & Solid edge ) Software. ➢ Developing 3D Models By re-mastering the “STL” files. ➢ Complete Sub Assembly and Sheet metal drawings. ➢ Rever... Read more

➢Plastic design in automotive industry in (Cero, Solid works & Solid edge ) Software. ➢ Developing 3D Models By re-mastering the “STL” files. ➢ Complete Sub Assembly and Sheet metal drawings. ➢ Reverse Engineering, Design of Fixtures, & Tools. ➢ Sheet metal design & Plastic components design. ➢ Design Piping and hose. ➢ Complete Sheet metal & Sub assembly drafting.

• Automobile parts designing in solidworks and product design. • Simulation of mechanical parts. • 2D to 3D designing

• Automobile parts designing in solidworks and product design. • Simulation of mechanical parts. • 2D to 3D designing

I'm​ a graduate mechanical engineer. Though new to freelancing, I've certain skills that I've acquired over time. I have over 45 months of experience in working in 2-D drafting, 3-D modelling, renderi... Read more

I'm​ a graduate mechanical engineer. Though new to freelancing, I've certain skills that I've acquired over time. I have over 45 months of experience in working in 2-D drafting, 3-D modelling, rendering along with a hand in simulations (Structural/kinematic/thermal). My preferred software skills for these are SolidWorks, AutoCAD, Unigraphics NX, Fusion 360, ANSYS but can stretch out to various other software too. I'm also available for contractual work. Since I'm new at this platform, my rates would be very modest and can work over 40hrs/week.

Results-driven CMM Programmer with hands-on experience in PolyWorks, GOM Inspect, Calypso, and AC-DMIS, specializing in precision measurement, inspection programming, and quality assurance. Highly pro... Read more

Results-driven CMM Programmer with hands-on experience in PolyWorks, GOM Inspect, Calypso, and AC-DMIS, specializing in precision measurement, inspection programming, and quality assurance. Highly proficient in offline and online CMM programming, 3D scanning inspection, and advanced dimensional analysis to ensure strict adherence to engineering specifications. Strong expertise in GD&T interpretation (ASME / ISO), first article inspection (FAI), PPAP, and detailed inspection reporting. Experienced in working with complex geometries, castings, machined, sheet metal, and molded components. Adept at collaborating with manufacturing and quality teams to resolve dimensional issues, reduce rework, and improve process capability. Known for accuracy, efficiency, and a disciplined approach to quality systems such as ISO 9001 / IATF 16949. Committed to continuous improvement and delivering reliable measurement results in high-precision manufacturing environments.

I AM skilled in Tekla , FrameCad, Autocad, Steel Detailing. -:Software Exposure:- CAD Tools Auto CAD 2007,08,10&12 ,Tekla steel(Tekla Steel Structure 15,16,18,19 LATEST 21) Frame Cad, Desig... Read more

I AM skilled in Tekla , FrameCad, Autocad, Steel Detailing. -:Software Exposure:- CAD Tools Auto CAD 2007,08,10&12 ,Tekla steel(Tekla Steel Structure 15,16,18,19 LATEST 21) Frame Cad, Designer Tool Staad Pro (Basic knowledge) Other Software Used M.S. Word, M.S. Excel, M.S. Power Point *Tekla structure Project* •ALPHATHUM CITY G+36 TOWER 1 ,2 AND 2 by using Trimble Tekla Structural Software.Noida Sec-90(BHUTANI INFRA). • Preparation of structural 3D Modal,GA and fabrication drawings for FlipKart Campus 10 Towers in Embassy Village Bangalore by (B L Kashyap). • Preparation of structural GA and fabrication drawings for Midspace G+15 floor Tower in Hyderabad(K Raheja). • Preparation of structural 3D Modal,GA and fabrication drawings for NICL (National Insurance Company )G+17 floor Tower in Kolkata by using (NBCC). • Preparation of structural 3D Modal,GA and fabrication drawings for MIST AVENUE FESTIVAL CITY G+36 TOWER 1 & 2 . Noida sector 143 (BHASIN). • Preparation of structural 3D Modal,GA and fabrication drawings for TONSE RIVER BRIDGE 60.8 METER SPAN by using Trimble Tekla Structural Software(GMR/SYSTRA). -:Working Experience:- Working with JINDAL STEEL & POWER LIMITED(JSPLCSB TEAM) as a post of Tekla Detailer/Designer Since NOV 2014 to till date. Working with AL MASOOD BERGUM WLL ABU DHABI (UAE) as a post of Detailer/ Designer Since July 2014 to NOV 2015. Working with Altif E Homes Pvt Ltd New Delhi as a post of Detailer/Draftsman. Since April 2012 to July 2014. Working with Elemente Homes Noida as a post of Detailer/Draftsman. From March 2009 to April 2012. Working with Raj Counstruction Moradabad as a post of Draftsman. From JAN 2008 to Fab 2009 . -:Professional Qualification:- (Total Experience 8years 6 month) 1. AutoCad (2016 Latest using ) 2. Xsteel /Tekla Structure Version. 17/18,19( 21 Latest using ) My Skill as a Structural Detailer AutoCad & Tekla :- A. 3D Modal GA Drawing and Layouts of Architectural Drawings.

my name is vinay kumar, born on 8th november and raised in Army environment as dad is army officer and mother is a homemaker, having one elder brother.I have time and interest in science, that lead it... Read more

my name is vinay kumar, born on 8th november and raised in Army environment as dad is army officer and mother is a homemaker, having one elder brother.I have time and interest in science, that lead it to me pursuing BTech in mechanical engineering from Dr K.N.Modi University followed by my high school and intermediate from KENDRIYA VIDYALAYA No.2 Ferozepur Cantt in science stream(P.C.M).I learned different CAD software from different institutions CATIA AND UNIGRPAHIC from CITD HYDERABAD and SOLIDWORKS from CTTC both part of Indian MSME giving me experience with software and machining process too. I like to draw, read and listen music though I am a no good singer but a good artist.I am good with the computer too learned few basic programming language from c,c++ and HTML. still there so much to learn and working for happy life.