Hire Bill of Materials Designers near Tamil Nadu, India

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowle... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

About: JAS Inventives Engineering Systems Private limited is a registered startup company committed to provide design services to companies looking for design solutions, cost saving and sustaining eng... Read more

About: JAS Inventives Engineering Systems Private limited is a registered startup company committed to provide design services to companies looking for design solutions, cost saving and sustaining engineering We provide the following CAD and Design services CAD services: --------------- CAD Conversion work (2D to 3D, 3D to 2D, 2D to 2D, 3D to 3D) Legacy Drawing Conversion (Raster to CAD, Paper to CAD, Hand sketches to CAD) Fix CAD model errors, Optimize CAD models CAD Tool standardization / migration (Re-featuring) Convert concept R&D model to design model Convert industrial skeleton (skins surface) to design model Mechanical Drafting / Detailing Tolerance stack-up analysis Apply GD&T Pre-defined part library creation (customization) Prepare Bill of Materials Fixture design (Assembly, Inspection, holding, testing fixtures etc.) Standardization of drawing Apply DFx (Design for manufacturing, assembly Reverse Engineering (scan and convert) Tear down design (Bench mark study / competitor product analysis) Sustaining Engineering service: -------------------------------- ECO / ECN Redline corrections and design update Field failure analysis and reporting Engineering design changes (Mechanical) Design optimization (combine parts, remove non-critical features / parts, Assembly steps) Create / revise technical documentations Plastic part design services: ----------------------------- Plastic part design (fit, form, function consideration) Core and cavity extraction Convert part to moldable (apply parting surface, Gating consideration, Side / split cores) Part conversion (metal to Plastic) Injection molding design Other services: ------------------ Presentation making (Sales/ marketing brochures, training material creation, Proposition creation, case studies etc.) Technical documentation Data migration Training --------- Solidworks Online Training (Part, Assembly, Detailing. Plastic molds) – Original license holder from Dassault systems Experience: ------------- Talented Engineering professional with overall 20+ years of experience in various industry domains where effectively managed engineering projects in medium and large organizations. Predominantly worked in medical device domain for past 10+ years Product experience: Medical device, consumer products, home appliances and Industrial products Product design & Development

8 years 6 months experienced in Product Life Cycle Management concepts and their application in the area of Product Design, Manufacturing process management, Bill of Materials, Document Management, Pr... Read more

8 years 6 months experienced in Product Life Cycle Management concepts and their application in the area of Product Design, Manufacturing process management, Bill of Materials, Document Management, Product change /configuration management and collaborative Product development. Managing and controlling the Bill of Material for existing products through Engineering Change Management system. 3 years 5 months experienced in Project Engineering. It includes review on customer specifications / requirement, doing engineering activities – Creating General arrangement drawing with BOM by using of design software UG through Team Centre, Machine Selection, Analyze and Validation of Bought-out components, Coordination of Engineering team at USA and Internal team for sub assembly parts 3 Months Overseas experience – Cameron Compression System, Buffalo, New York, USA Well versed with 2D & 3D modeling, GD&T techniques, plastic component design and Value Engineering and Analysis. Effective team player with strong communication and problem solving skills willing to take and accept on Senior Level Position to increase my career growth within the field.

 Drafting of Sheet metal, Structural, Detailed, Assembly drawings & Exposure 2D to 3D Modeling by using AutoCAD & ProgeCAD.  Prepare the Quotations, Work order/Competition reports and... Read more

 Drafting of Sheet metal, Structural, Detailed, Assembly drawings & Exposure 2D to 3D Modeling by using AutoCAD & ProgeCAD.  Prepare the Quotations, Work order/Competition reports and schedules and other elements associated with in projects.  Preparation of detailed manufacturing drawings & part list.  Contact with clients, listen to customer needs, calculate bill of materials and prepare Quotation based on client design, specifications, materials, and equipment. Prepare and submit work completion report.  Conduct vessel safety co-ordination committee meeting (VSSC) in daily with vessel master, chief-engineer/mate & project manager.  Discuss various kind of safety procedures as per WSHC regulations & Mechanical activities with working team, vessel crews, person of in-charge.  Apply (PTW) Hot-work permit, Work at height, confined space entry, Bunkering, scaffolding and various kind of permit system.  Prepare Risk Assessment (RA & RM) and Bizesafe-3 reports, Conduct toolbox meetings.  To draft accurate detailed drawings using company and other engineering standards.  Prepare AutoCAD drawings from design information-based asper client specifications and in accordance with good industry practice.  Familiar about Fabrication of all kinds of gas manifold ranging from panel, trailer, bunker, pallet, Block, stand manifolds etc.  To check Incoming, Outgoing parts QC inspection.  Conduct site visits, Clients and meetings when necessary to discuss details and collect field Measurements as needed.  Work with engineering and production personnel to develop and maintain critical manufacturing process, design test fixture and documentation.  Selection of materials, prepare and checking for various kind of drawings.  Analyzed client’s problem to diagnose the cause & provide alternative best technical solutions.  Analyzed customer’s problems provide alternative best technical solutions.  Formulating & Eng. Calculations to derive the required dim. to accommodate the elevators.  Create, Maintain and Publish QC Trend Analysis Report.  Drafting & Design (2D & 3D) of Launch vehicle hardware’s using AutoCAD.  Discuss with clients & Review Modifications of Various Engineering Drawings in CAD.  Participate in design & developments of new products.  Presenting isometric, technical, shop drawings & spot perspective to clients.  Involved in realization of various projects like PSLV, GSLV Mk.-II &III.  Performed drafting of general arrangements, Assy. & detailed drawing of components.  Assist with Scientists for various separation system projects.

Having around 2 year 10 months of experience in Product Development, Product Data Management, Prototype Development activities & Product Testing.  Worked on different modules like part design, gener... Read more

Having around 2 year 10 months of experience in Product Development, Product Data Management, Prototype Development activities & Product Testing.  Worked on different modules like part design, generative shape design, Sheet metal design, assembly and drafting of Solidworks & Unigraphics.  Assigned with the responsibilities of creating the Dimensional Drawings, Main Assembly Drawing, Part Drawings and the complete Bill of Materials.  Handled the job of checking and correcting the complete Bill of Materials (BOM) of a machine before it is released for manufacturing to control errors.  Comprehensive knowledge of Product Lifecycle Management and Reverse engineering, Geometric Dimensioning & Tolerances.

As a Graduate in Mechanical Engineering with a passion for innovation and a strong foundation in engineering principles.

As a Graduate in Mechanical Engineering with a passion for innovation and a strong foundation in engineering principles.

As a Design Engineer I have 5+ years’ experience in CAD & Manufacturing Industries. My policy “Customer Satisfaction is key for success of business”. Our Motto CADASSIST can Assist your Profitabilit... Read more

As a Design Engineer I have 5+ years’ experience in CAD & Manufacturing Industries. My policy “Customer Satisfaction is key for success of business”. Our Motto CADASSIST can Assist your Profitability in below manners:-  New Product Development  3D Modelling  2D to 3D conversion  3D to 2D conversion  Drafting services  Sheet metal - Bolted constructions  Sheet metal - Welded constructions  Estimation for the Sheetmetal products  Reverse Engineering  Protypes  Jigs & Fixture designs  Fabrication drawings  Manufacturing drawings  3D Exploded view  3D Animation  Furniture Designs  Concept Designs  Bill of materials  Layout Preparation  Electrical Designs We always keep relevant codes and standards in consideration. I strive to clearly understand my customer's needs before starting any project to make sure we are aligned on what the final product should be. Our services are aimed to help you manage and execute projects efficiently, On time commitment and translate them into higher profitability. We can Assist you in the following software’s:-  AuotCAD  Soildworks  Cero  NX cad  Inventor  MS Office We believe in adding value to your existing design capabilities and in turn bring more productivity and profitability for your business.

1.Designing of Static Equipment’s like Pressure Vessel, Liquid Storage Tanks as per code of ASME, EN std. 2.Developing 3D Model of Static Equipment (Vertical & Horizontal), Piping model including I... Read more

1.Designing of Static Equipment’s like Pressure Vessel, Liquid Storage Tanks as per code of ASME, EN std. 2.Developing 3D Model of Static Equipment (Vertical & Horizontal), Piping model including Insulated Vacuum Jacket, PRS Skid assembly, Pressure Build-up coil & Vaporizer Skid, Equipment Plat form with Ladder. 3.Preparation of Detail Fabrication Drawings, Isometric Drawings, Components Drawings with complete Bill of Materials.

A Mechanical Engineer with 3 Years and 10 Months of experience in Sheet Metal Design, Part Modelling, New Product Development design, convenient with CAD tools like Auto CAD, Solid Works, Pro-E, Solid... Read more

A Mechanical Engineer with 3 Years and 10 Months of experience in Sheet Metal Design, Part Modelling, New Product Development design, convenient with CAD tools like Auto CAD, Solid Works, Pro-E, Solid Edge, Material analysis, Costing, Drafting, Detailing, Conversion of 2D files into 3D files, Creating Animation, Rendering of Products and Reverse Engineering.