Hire CAD designers & engineers in Wolverhampton, England

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but h... Read more

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but have experience of many areas relating to product design.

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - High End Consumer Products - Low-Cost Consumer Products - Power Tools I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Prototyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practiced creative skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.

I am a young architect / designer about to qualify with a significant amount of experience within architectural design, product and jewelry design, specialising in 2d / 3d drawing, modelling and visua... Read more

I am a young architect / designer about to qualify with a significant amount of experience within architectural design, product and jewelry design, specialising in 2d / 3d drawing, modelling and visualisation. I work within rhino, grasshopper and cad, and photoshop / v-ray in order to produce detailed 2d and 3d drawings / visualisations. Please take a look at my online portfolio : http://rufusedmondson.wix.com/rufusedmondson I hope to hear from you soon. Kind regards, Rufus

I'm an interior designer with more than 5 years experience and I have worked in many different architectural studios so I have wide experience in all areas. My passion is Autocad because I can visuali... Read more

I'm an interior designer with more than 5 years experience and I have worked in many different architectural studios so I have wide experience in all areas. My passion is Autocad because I can visualize people's dreams. I love my profession and I'm looking for challenges.

UK University graduate with work experience. -Prototype/commercial designs. -Functional/dynamic/static parts. -Part/Assemblies. -3D printable designs/solutions. -Human-centred design approach.

UK University graduate with work experience. -Prototype/commercial designs. -Functional/dynamic/static parts. -Part/Assemblies. -3D printable designs/solutions. -Human-centred design approach.

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions... Read more

ULUDAS CONSULTANCY LTD. is founded in London by Murat ULUDAS to provide fast, accurate and affordable mechanical engineering drawings, calculations, and analysis. We provide a wide range of solutions for CAD Design, Building Information Modeling (BIM), Engineering Calculations, Geometric Dimensioning, and Tolerancing, Piping and Instrumentation Diagrams, Block Flow Diagrams, Process Flow Diagram, Annual and Steady-State Building Thermal Analysis, Fluid Flow Analysis, and Finite Element Analysis.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

My name is Akram Abuzakouk. I am a Mechanical Design Engineering freelancer seeking any CAD projects that require 2D/3D part and assembly modeling as well associated detailed engineering drawings for... Read more

My name is Akram Abuzakouk. I am a Mechanical Design Engineering freelancer seeking any CAD projects that require 2D/3D part and assembly modeling as well associated detailed engineering drawings for the client and supplier. I have over 3 years of experience in this field, of which I have spent on multiple projects providing detailed arrangement and manufacturing drawings for components of Steel Rolling Mill Plants. The primary services I provide are: + Mechanical Engineering + 2D/3D CAD Modeling + Detailed Engineering Drawings + Advanced Knowledge of GD&T and Placement + Concept Sketch to Final CAE Design + Intermediate FEA and CFD Analysis (with Report) + Mold/Cavity Design + 3D Rendering + CAD File Conversion I am a highly motivated and enthusiastic Mechanical Design Engineer with a strong background looking to expand my career in the freelancing industry to create a reputable freelancing profile which I can showcase my credibility through the quality of my work. In addition to my CAD expertise, I have a solid educational foundation and a strong passion for engineering and mechanical design that I believe will align well with the clients' set criteria. I am happy to find out how I can assist you in your future projects. Thank you for reading my profile. Akram Abuzakouk.

I'm a degree qualified Design Engineer with experience working in the Oil & Gas industry in both R&D and an operations support role. From designing small parts to several tonnes of control valve asse... Read more

I'm a degree qualified Design Engineer with experience working in the Oil & Gas industry in both R&D and an operations support role. From designing small parts to several tonnes of control valve assembly and even mapping out the entirety of a CNC machine shop - machines and their accessories included - there is nothing too small or too large for me to design. I offer concept design, reverse engineering and engineered solutions among others.

I have 6 years civil and structural CAD experience. I am a project engineer for a civil engineering company and have managed my own small design projects. I am highly skilled in Civil 3D, AutoCAD and... Read more

I have 6 years civil and structural CAD experience. I am a project engineer for a civil engineering company and have managed my own small design projects. I am highly skilled in Civil 3D, AutoCAD and Revit.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing... Read more

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing company and in a reputable engineering consultancy doing work for many of their international clients and always subjected to high quality standards. I'm offering my expertise and skills to help you develop your projects from concept to reality. Client satisfaction is my priority.

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills... Read more

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills and knowledge of physics and CAD software and continue to learn about the industry. I have plenty of experience with SolidWorks, which I use as my main tool, but can easily adapt to any software. I am a fast learner, quick on my feet and always willing to go the extra mile. My friendly, open attitude was greatly appreciated by my superiors and colleagues in my previous roles. When I’m not on the job, I enjoy hiking, camping and spending time creating custom pc builds.

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural ana... Read more

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural analysis.

An experienced designer in both product and technical fields who is passionate about all areas of manufacturing and product development. Knowledgeable in working in both start-ups and major companies,... Read more

An experienced designer in both product and technical fields who is passionate about all areas of manufacturing and product development. Knowledgeable in working in both start-ups and major companies, skills include understanding the importance of business acumen and customer service. Possesses a unique cultural background, having been brought up in Kuwait, and as a result excels working in diverse teams and relishes the opportunity to work with clients internationally. Academic studies have helped broaden an understanding of management theory and best-practice within the innovation and new product development space.

Available for all forms of design work, prototyping and engineering analysis. Main skills ranging from sheet metal design to surface modelling. Currently working in the motorcycle industry, with pr... Read more

Available for all forms of design work, prototyping and engineering analysis. Main skills ranging from sheet metal design to surface modelling. Currently working in the motorcycle industry, with prior experience ranging from the wider automotive field to medical and industrial computer design. Highly experienced working mainly with Solidworks and Autodesk Inventor, but prior experience working with Siemens NX and Autocad.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

Highly motivated and creative Master's of Mechanical Engineering graduate, with well developed skillset in digital manufacture and a strong academic history, who enjoys the application of CAD software... Read more

Highly motivated and creative Master's of Mechanical Engineering graduate, with well developed skillset in digital manufacture and a strong academic history, who enjoys the application of CAD software to real problems. I have successfully used Solidworks in a number of real world and academic projects. Extensive design work includes development of a wave powered marine marker buoy for use in rough seas to the design of a community slow sand water filtration device in a small town in Nothern Peru. Additionally, I have several years of experience using Autodesk Inventor, which I use primarily for personal projects. If you are interested in other things I have designed and implemented, or if you want to know more about my experience please don't hesitate to contact me.

Straight after his Graduation in MSC Mechanical Engineering Design, Damien Gicquel launched his own Product Design Company. His work with companies from various backgrounds gave him a flavour of the w... Read more

Straight after his Graduation in MSC Mechanical Engineering Design, Damien Gicquel launched his own Product Design Company. His work with companies from various backgrounds gave him a flavour of the wide and varied requirements that customers face from all types of different industries. DG Design intends to provide all customers with the level of support required to reach their goal. Through communicating the desired objectives in detail, we can provide a bespoke solution for each and every requirement – ensuring that the client is at the forefront of our attention.

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem sol... Read more

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem solving, multi-tasking, prioritising and maintaining peace are what comes naturally. Projects focused on people and planet are held close to heart and are brought to life through a diverse skill set in project management software and creative suites. A multi-disciplinary approach and passion for design has led Mirrin to be an expert in Graphic Design, Illustration, Product 3D Modelling, 3D Rendering and Animation, Architectural and Interior Design, CAD Drafting and Documentation.

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need... Read more

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need - from design ideas to modelling it on software to the physical printing of it. Feel free to get in touch with anything you need doing!

I can offer 3D and 2D design services ranging from designing from scratch to suit your requirements to detailing or modifying your existing models . I am also experienced in toolpath programming for C... Read more

I can offer 3D and 2D design services ranging from designing from scratch to suit your requirements to detailing or modifying your existing models . I am also experienced in toolpath programming for CNC machines, and I am equipped with a CNC router on which I can machine parts in wood/plastic materials. I have a good "hands-on" experience on the design of jigs, mechanisms, tools, GAP/FLUSH checking tools, fixtures and composite forming tools for industry and automotive sectors as well as aerospace, and having worked for many years as tooling engineer and cnc programmer as well as designer, I always design keeping in mind production and machining needs. I am also experienced in CNC programming using Powermill. Should you need any help with CAD/CAM please contact me.

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustr... Read more

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustrator Blender Reverse engineering from scan data Design for 3D printing 3D scanning Prototyping Ideation Automotive Design CAS Surfacing .STL .Step .STP

Architect designer I understand this industry and I know what I need to do to accomplish its business objectives.

Architect designer I understand this industry and I know what I need to do to accomplish its business objectives.

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in... Read more

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in depth knowledge of the FDM process and how to optimise for: print speed, strength, and quality. Prize winner in many online 3D printing and design competitions, winning approximately £2000 worth of prizes in the past three years: Polymaker ‘3D printed hook tournament: Second place. A combination of mechanical engineering, creative design and DfAM to create the strongest possible 3D printed polymer hook (no closed loop) weighing less than 50g. The final design withstood over a 1 ton load. https://www.thingiverse.com/thing:4682845 https://youtu.be/7JOS1Cv07ts?t=831 Polypanels Design Competition: Second place. https://www.myminifactory.com/object/3d-print-polypanels-shaft-system-93600 https://youtu.be/Hs9tfpPQGmo?t=1989 . E3D Multi-material STL Competition: Second place. Design of a set of compliant pliers intended for multi-material FDM printing: https://www.thingiverse.com/thing:3522722