Hire Local CAD Designers near Ashford, England

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills... Read more

I’m a hardworking mechanical engineer, passionate about finding efficient solutions to challenging problems. I am currently looking for a junior position as a design engineer where I can use my skills and knowledge of physics and CAD software and continue to learn about the industry. I have plenty of experience with SolidWorks, which I use as my main tool, but can easily adapt to any software. I am a fast learner, quick on my feet and always willing to go the extra mile. My friendly, open attitude was greatly appreciated by my superiors and colleagues in my previous roles. When I’m not on the job, I enjoy hiking, camping and spending time creating custom pc builds.

I'm a degree qualified Design Engineer with experience working in the Oil & Gas industry in both R&D and an operations support role. From designing small parts to several tonnes of control valve asse... Read more

I'm a degree qualified Design Engineer with experience working in the Oil & Gas industry in both R&D and an operations support role. From designing small parts to several tonnes of control valve assembly and even mapping out the entirety of a CNC machine shop - machines and their accessories included - there is nothing too small or too large for me to design. I offer concept design, reverse engineering and engineered solutions among others.

felixcreative is a CAD Design Bureau, providing Computer Aided Design drawing services. Concept Sketch Work, Detail Design, Photo Realistic Renderings, 3D CAD models, 3D Prints & Engineering Drawings... Read more

felixcreative is a CAD Design Bureau, providing Computer Aided Design drawing services. Concept Sketch Work, Detail Design, Photo Realistic Renderings, 3D CAD models, 3D Prints & Engineering Drawings are just some of our capabilities. We are also practiced in Product Design development, from sketch to fully working device. Using cutting edge software, we take your design and turn it into reality.

Qualified Engineer with more than 25 years experience in design and management. 3D CAD designer with in-depth knowledge of both designing for production and short run model making. Injection Moulding,... Read more

Qualified Engineer with more than 25 years experience in design and management. 3D CAD designer with in-depth knowledge of both designing for production and short run model making. Injection Moulding, Metal Casting, Metal and Plastic Fabrication, CNC Machining, Vacuum Forming, mechanism design. Concept design, invention advice

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mi... Read more

LUMA-iD specialises in Product Design and 3D printing. We are a small, focused team who can help our clients take the most basic sketch and turn it into a fully developed product. Design requires a mixture of experience, problem solving and creativity — that’s why we love it. Have a look around the website to see what we do and if you have a prototype that needs building or a product that needs designing, don’t hesitate to get in touch.

I'm an interior designer with more than 5 years experience and I have worked in many different architectural studios so I have wide experience in all areas. My passion is Autocad because I can visuali... Read more

I'm an interior designer with more than 5 years experience and I have worked in many different architectural studios so I have wide experience in all areas. My passion is Autocad because I can visualize people's dreams. I love my profession and I'm looking for challenges.

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem sol... Read more

Highly dynamic Architectural Project Lead with 5+ years of experience providing detail oriented project management & professional design services. Graduating with a Master of Architecture, problem solving, multi-tasking, prioritising and maintaining peace are what comes naturally. Projects focused on people and planet are held close to heart and are brought to life through a diverse skill set in project management software and creative suites. A multi-disciplinary approach and passion for design has led Mirrin to be an expert in Graphic Design, Illustration, Product 3D Modelling, 3D Rendering and Animation, Architectural and Interior Design, CAD Drafting and Documentation.

I have designed various machinery including road tankers, generating sets, pumps, compressors, hydraulic mechanical handling equipment, lifting gear and even a battery powered mobile hoist for Torness... Read more

I have designed various machinery including road tankers, generating sets, pumps, compressors, hydraulic mechanical handling equipment, lifting gear and even a battery powered mobile hoist for Torness Nuclear power station. I have received industrial training in the UK from National Grid, the Lifting Equipment Engineers Association (LEEA) and the National Fluid Power Centre (NFPC). I am an expert with Inventor, and in recent years have also become competent with Fusion 360 and Solidworks. CAD software is so good nowadays, that it is quite easy to model something. Where I have proven to be outstanding is with my application of mechanical design analysis and enough experience to know how to apply theoretical methods to reality and what works. Where necessary I can present comprehensive design substantiation e.g. to meet design standards such as BS / ISO or machinery directive and obtain CE / UKCA marking. I am expert with MathCAD and Excel for producing and presenting calculations that have held up to scrutiny. Where appropriate I will produce FEA with Inventor and ANSYS for stress analysis of more complex geometry and loading situations. During my Postgraduate Diploma in Engineering (later incorporated to MSc), I studied the numerical methods involved in FEA, and this combined with experience in aftermarket looking at part failure with Howden Process Compressors, now informs how I use these tools and allows me to use FEA effectively and realistically. I have solid understanding of key manufacturing processes including machining, fabrication, welding, and fitting, having always worked closely with the shop floor, soaking up knowledge and enjoying the camaraderie. I am interested in innovative technology and in recent years I have produced successful designs for mechanical components made by 3d printing of plastic. I have extensive knowledge of industrial components and suppliers and have often saved the time and expense of design and manufacture by knowing of an appropriate off-the-shelf part. In summary, with many years of industrial mechanical design experience, and being a generally trustworthy and conscientious person, taking pride in what I do, I represent exceptional value for money and a choice that you will not regret

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural ana... Read more

Experience in various industries including aerospace, marine and product design. With significant experience using solidworks producing 3D Models and Drafting, I also have experience in structural analysis.

UK University graduate with work experience. -Prototype/commercial designs. -Functional/dynamic/static parts. -Part/Assemblies. -3D printable designs/solutions. -Human-centred design approach.

UK University graduate with work experience. -Prototype/commercial designs. -Functional/dynamic/static parts. -Part/Assemblies. -3D printable designs/solutions. -Human-centred design approach.

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing... Read more

As a degree qualified and industry experienced Design Engineer and Naval Architect with +5 years of CAD experience, I have previously worked as a lecturer at university level, in a yacht manufacturing company and in a reputable engineering consultancy doing work for many of their international clients and always subjected to high quality standards. I'm offering my expertise and skills to help you develop your projects from concept to reality. Client satisfaction is my priority.

Innovative Mechanical Engineer passionate about Product Design, Manufacturing and Testing strategy, bringing 4+ years of experience putting integrity at the heart of project. A 3D printing and CNC mac... Read more

Innovative Mechanical Engineer passionate about Product Design, Manufacturing and Testing strategy, bringing 4+ years of experience putting integrity at the heart of project. A 3D printing and CNC machining enthusiast. Possess strong technical, analytical, and practical skills and is detail-oriented, time-focused, consistently delivering, having technical and practical knowledge and a team player. Strong aptitude in fundamentals of mechanical engineering and 3D modelling using SolidWorks, NX, Blender, and Fusion360, FEA Using ABAQUS and ANSYS Structural, CFD using Fluent, and knowledge of Python and MATLAB. Previous academic and work experience has enabled the development of outstanding communication skills with fluency in technical writing.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

Design Engineer specialising in manufacturing and fabrication drawings. Over decade of experience in manufacturing and marine engineering.

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross... Read more

For most of my professional career I have had one foot in the academic world and one foot in the business world. I have been working with Fusion 360 for over a year developing parts for motocross bikes and pushing the Fusion 360 software to its limits.

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machi... Read more

Award winning design engineer with a background in machinery design to ISO standards. I've Worked for a tech start-up designing a medical sterilisation machine. Developed 3 iterations of the machine from concept to prototype, and prototype to commercial product. Designed Ultra High Level vacuum systems, Radiation Shielding, Product Handling, Test Rigs, High Voltage Electrical Enclosures etc. I also work for, and have worked for several multinational engineering corporations developing and automating production equipment, test rigs; and am an registered Incorporated Engineer (I Eng) with the Institute of Mechanical Engineers.

3D models using Solid Edge 3D to produce 3D drafts of components and assemblies 2D drafts using Solid Edge 2D for simpler drafts, layouts and schematics www.logiccadservices.com for more info

3D models using Solid Edge 3D to produce 3D drafts of components and assemblies 2D drafts using Solid Edge 2D for simpler drafts, layouts and schematics www.logiccadservices.com for more info

I am Monir, an experienced Industrial Designer and Product Engineer with over 12 years of expertise in analysis, design, 3D CAD modeling, automotive parts design, and plastic injection mold developmen... Read more

I am Monir, an experienced Industrial Designer and Product Engineer with over 12 years of expertise in analysis, design, 3D CAD modeling, automotive parts design, and plastic injection mold development. I specialize in SolidWorks for precise analysis and design of industrial components and assemblies, and I am skilled in preparing models for 3D printing (DFM, SLA, SLS) and rapid prototyping. My core competencies include: • Analysis and Design of Industrial and Automotive Parts with engineering precision • Plastic Injection Mold Design and optimization for 3D printing • Prototyping and Manufacturing Support • Technical Drawings and Engineering Documentation I am committed to delivering high-quality, functional, and production-ready designs that turn client ideas into reality, combining creativity with engineering accuracy. My designs are not only visually appealing but also practical, manufacturable, and cost-effective.

Hi, I am a freelance 3D Visualiser and qualified Architectural Technician based in Leeds (UK) skilled in 3DS Max/V-ray & AutoCAD. I work in close liaison with architects, developers, marketing agencie... Read more

Hi, I am a freelance 3D Visualiser and qualified Architectural Technician based in Leeds (UK) skilled in 3DS Max/V-ray & AutoCAD. I work in close liaison with architects, developers, marketing agencies and design consultants to produce architectural CGI which is used primarily to communicate design concepts to clients. Working on projects throughout the UK, I provide still imagery, VR and animations to facilitate the marketing and planning requirements of projects, as well as being used as a means of securing project funding and sponsorship. I have over 35 years experience working in a design environment, working with AutoCAD since 1989 & in the mid 1990's I worked as a beta tester for Autodesk and in 1998 had 3D work published in CADdesk magazine. I get most of my work through recommendations, as I put a high value on the quality of work and the ability to hit agreed deadlines. Fees are generally agreed either as a 'fixed fee per project', on a 'daily rate' or 'monthly retainer' for longer term projects.

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need... Read more

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need - from design ideas to modelling it on software to the physical printing of it. Feel free to get in touch with anything you need doing!

I am a Project engineer based in a mechanical engineering environment completing design projects for a range of sectors. everything from Pipework and vessels to brackets and machined components, I hav... Read more

I am a Project engineer based in a mechanical engineering environment completing design projects for a range of sectors. everything from Pipework and vessels to brackets and machined components, I have also worked on one of prototype designs. I can produce designs in both 2D and 3D with the main software being Autodesk based.

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

love designing devices, furniture, interior, exterior and landscape relating all kinds of architecture

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the w... Read more

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the way. Currently I am open to new short-medium term projects. Ultimately, I'm here to produce the best work possible for whoever I'm working with. If you have a project that requires my skills, please contact me via LinkedIn or my email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic... Read more

I am a computer aided design engineer, that helps people create consumer products. Whether electronic or mechanical, I can take you through the product development process. I specialise in electronic enclosures and products that are mechanical in nature. I create 3D models that are parametric, easy to modify and make.

I am currently working as 3D Visualiser at Claremont Group Interiors, in Manchester, UK. On free time, when is raining, I like to spend some time working on a personal project of various rendering wi... Read more

I am currently working as 3D Visualiser at Claremont Group Interiors, in Manchester, UK. On free time, when is raining, I like to spend some time working on a personal project of various rendering with 3ds Max and V-Ray, with the aim to improve and reach a good level in this field. In the past I worked as a graphic designer at the studio graphic Mirus of Macerata, where I worked mainly with InDesign, Photoshop and Illustrator for creating various printing materials and not, I also worked in support of the team for a project 3d rendering for making two Catalogues for a kitchens company.

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustr... Read more

Hi I am a designer, I use cad software to produce surfaces that can be manufactured, automotive design, prototyping, tool design, A-class surface generation. Autodesk Alias, Fusion PhotoShop Illustrator Blender Reverse engineering from scan data Design for 3D printing 3D scanning Prototyping Ideation Automotive Design CAS Surfacing .STL .Step .STP

HCB offers a considerable experience on custom & semicustom bespoke production environment with a solid understanding of one-off, batch and mass production mindset proven by a range of work from initi... Read more

HCB offers a considerable experience on custom & semicustom bespoke production environment with a solid understanding of one-off, batch and mass production mindset proven by a range of work from initial concepts through design and prototyping, and into manufacture coupled with a strong knowledge of Design For Manufacture (DFM) or Design For Assembly (DFA). 3D & 2D Design Work Any kind of 3D Modelling and 2D engineering design work and CAD Design is being done in HCB everyday, precisely and within time targets. Our knowledge of various materials and production techniques allow us present different alternatives to clients. Composites HCB is capable of giving consultancy services on almost all sub-fields of composite design and production processes. Our main experiences are on hand lamination, vacuum bagging, vacuum infusion, L-RTM, RTM processes with Thermoset resins and injection with Thermoplastic resins. Tooling Design ➢ Big scale light-tool (SMP, MDF, etc.) plug & mould design and manufacturing consultancy for composites and sheet plastics production ➢ CNC milling process optimisation (cost, timing, quality) ➢ Transportation / Assembly Jigs & Fixtures design Mechanisms Design HCB Consulting understands state of the art manufacturing technologies from traditional lathe and milling cutter to modern 5 axis CNC work centres and erosion machines. We deliver robust bespoke mechanism designs that can be manufactured and work for long years without any problems

I’m a product/industrial designer and engineer with a BA in Industrial Design (Universidad Autonoma Metropolitana, Mexico) and an MSc in Integrated Product Design (Delft University of Technology, The... Read more

I’m a product/industrial designer and engineer with a BA in Industrial Design (Universidad Autonoma Metropolitana, Mexico) and an MSc in Integrated Product Design (Delft University of Technology, The Netherlands). I have experience working in 4 different countries (UK, The Netherlands, India & Mexico). I like to work in projects that are exciting, challenging and meaningful. I don’t want to stagnate working in the same thing over and over. I like to be dynamic, always changing, staying out of my comfort zone. I learn fast and well, I’m adventurous, entrepreneurial, and trust my guts, I like to do, build, repair, tweak, mod, carve, mill, cut, sand, and of course create. I like technology, electronics, and software. I love sports, especially football. I love arts, especially music & films. I play & build electric guitars, and I love everything that has to do with it (amps, effects, accessories, etc.). I’m sociable, relaxed and playful, but serious and committed. I like long lasting relations with people. I am lucky to have a large and supportive network of people, many friends, and many best friends. I try to constantly increase my social circle. Contact me if you have a nice project, a challenging job, if you want some designer feedback, or simply to talk about design, technology, music, art, or anything you can think of.