Remote
Work location
CAD designer for one time finish, touch up and refine an amature model ready for 3D Printing Ended
About the job
I am looking for a refinement of this file. It is a grip for my tennis racquet. I am going to 3D print it with TPU as one object and not as modular parts.
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that it doesn't look rubbish(since my modelling skills are limited). The handle also needs to be thickened on the inside since it is quite thing at the moment and might be at risk of ripping.
Please let me know if you can help me with this and if you have any design improvements regarding design, material, etc.
I have attatched the file as well as two images, the images are just there to explain the idea of the grip and explain the idea of the straps. The pin and tuck straps that are cureently on the design are most likely not going to work but I am going to print it anyway just to see. The alternative is removing the holes for the studs/pins and rather making a shalow rectangular intent in the strap and the handle where the strap will fold onto in which I can attatch velcro to sercure the strap.
The triangular cuts made by each strap are intentional and should not be removed and the length of the grip should be 18cm.
Thank you for you consideration, I am looking forward to hearing back from you.
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that it doesn't look rubbish(since my modelling skills are limited). The handle also needs to be thickened on the inside since it is quite thing at the moment and might be at risk of ripping.
Please let me know if you can help me with this and if you have any design improvements regarding design, material, etc.
I have attatched the file as well as two images, the images are just there to explain the idea of the grip and explain the idea of the straps. The pin and tuck straps that are cureently on the design are most likely not going to work but I am going to print it anyway just to see. The alternative is removing the holes for the studs/pins and rather making a shalow rectangular intent in the strap and the handle where the strap will fold onto in which I can attatch velcro to sercure the strap.
The triangular cuts made by each strap are intentional and should not be removed and the length of the grip should be 18cm.
Thank you for you consideration, I am looking forward to hearing back from you.
I am looking for a refinement of this file. It is a grip for my tennis racquet. I am going to 3D print it with TPU as one object and not as modular parts.
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that it doesn't look rubbish(since my modelling skills are limited). The handle also needs to be thickened on the inside since it is quite thing at the moment and might be at risk of ripping.
Please let me know if you can help me with this and if you have any design improvements regarding design, material, etc.
I have attatched the file as well as two images, the images are just there to explain the idea of the grip and explain the idea of the straps. The pin and tuck straps that are cureently on the design are most likely not going to work but I am going to print it anyway just to see. The alternative is removing the holes for the studs/pins and rather making a shalow rectangular intent in the strap and the handle where the strap will fold onto in which I can attatch velcro to sercure the strap.
The triangular cuts made by each strap are intentional and should not be removed and the length of the grip should be 18cm.
Thank you for you consideration, I am looking forward to hearing back from you.
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that it doesn't look rubbish(since my modelling skills are limited). The handle also needs to be thickened on the inside since it is quite thing at the moment and might be at risk of ripping.
Please let me know if you can help me with this and if you have any design improvements regarding design, material, etc.
I have attatched the file as well as two images, the images are just there to explain the idea of the grip and explain the idea of the straps. The pin and tuck straps that are cureently on the design are most likely not going to work but I am going to print it anyway just to see. The alternative is removing the holes for the studs/pins and rather making a shalow rectangular intent in the strap and the handle where the strap will fold onto in which I can attatch velcro to sercure the strap.
The triangular cuts made by each strap are intentional and should not be removed and the length of the grip should be 18cm.
Thank you for you consideration, I am looking forward to hearing back from you.
I am looking for a refinement of this file. It is a grip for my tennis racquet. I am going to 3D print it with TPU as one object and not as modular parts.
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that... read more
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that... read more
I am looking for a refinement of this file. It is a grip for my tennis racquet. I am going to 3D print it with TPU as one object and not as modular parts.
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that it doesn't look rubbish(since my modelling skills are limited). The handle also needs to be thickened on the inside since it is quite thing at the moment and might be at risk of ripping.
Please let me know if you can help me with this and if you have any design improvements regarding design, material, etc.
I have attatched the file as well as two images, the images are just there to explain the idea of the grip and explain the idea of the straps. The pin and tuck straps that are cureently on the design are most likely not going to work but I am going to print it anyway just to see. The alternative is removing the holes for the studs/pins and rather making a shalow rectangular intent in the strap and the handle where the strap will fold onto in which I can attatch velcro to sercure the strap.
The triangular cuts made by each strap are intentional and should not be removed and the length of the grip should be 18cm.
Thank you for you consideration, I am looking forward to hearing back from you. read less
In the file there are two pin straps, there is one pin added at each strap with the rest still needing to be added. There is general refinement that needs to be done like bevelling of sharp edges just to make it more user friendly and so that it doesn't look rubbish(since my modelling skills are limited). The handle also needs to be thickened on the inside since it is quite thing at the moment and might be at risk of ripping.
Please let me know if you can help me with this and if you have any design improvements regarding design, material, etc.
I have attatched the file as well as two images, the images are just there to explain the idea of the grip and explain the idea of the straps. The pin and tuck straps that are cureently on the design are most likely not going to work but I am going to print it anyway just to see. The alternative is removing the holes for the studs/pins and rather making a shalow rectangular intent in the strap and the handle where the strap will fold onto in which I can attatch velcro to sercure the strap.
The triangular cuts made by each strap are intentional and should not be removed and the length of the grip should be 18cm.
Thank you for you consideration, I am looking forward to hearing back from you. read less
Things to know
Intermediate
Skill Level
$120
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Design
3D Design
3D Modeling
Industrial Design
blender 3d
+2 more
Job categories
3D Modeling
3D Printing Design
3D Design Services
About the client
Payment ready
United States (03:54 pm)
Posted
Active
Job activity
49 Applicants
1 interviews in progress
Similar jobs
The hairless otter civet toy project
Remote - Posted
It should be 3d printed and hairless with silicone soft skinned life sized and very bendable
3D Product Modeling
3D Design Services
3D Modeling
View job
(US Based Only) Remote thermal and vacuum systems engineer (freeze-drying / lyophilization) for a consumer countertop appliance
Remote - Posted
PumpNest is an early-stage company developing a countertop freeze dryer designed specifically for breast milk. We are looking for a remote thermal and vacuum systems engineer...
Mechanical Engineering
3D Design Services
3D Modeling
View job
Premium Luxury Solar Carport Design
Remote - Posted
We are looking for a creative and experienced designer to develop a unique, modern, and luxurious solar carport with a minimalist architectural style.
The design should fea...
3D Architectural Visualization Services
Architectural Planning and Design
Industrial Design Services
3D Design Services
3D Architectural Rendering Services
View job
3D Modeling of Moni Upholstered Armchair
Remote - Posted
I am looking for an experienced 3D modeler to create a high-quality and accurate 3D model of an upholstered armchair, starting from an existing 3D model of the wooden frame an...
3D Modeling
3D Design Services
3D Furniture Modeling Services
3D Product Modeling
View job
holiday village
Remote - Posted
I have a point cloud in RPC format and am looking for help with creating CAD drawings.
The building has two floors.
I need the floor plans for floor 1 and 2, and the roof....
Architectural Planning and Design
3D Design Services
3D Modeling
View job
Arabic ring design
Remote - Posted
i have ring with STL file 70% completed need to edit
3D Printing Design
3D Modeling
3D Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
220,195
global members
33,595
projects delivered to clients
Trusted by
