Remote
Work location
Design a 3D Printable Underwater Scooter Shell Around My Water Jet Kit (Fusion 360/CAD) Anyone
About the job
I am looking for an experienced CAD designer or mechanical engineer to design a custom underwater scooter (similar to a Seabob) around a propulsion system that I have already selected.
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I already have an STL of the exterior shell that I would like to use as a starting point or reference. The final design should be an editable CAD model (Fusion 360 preferred) with STEP files included.
The propulsion system has already been chosen (motor, water jet, ESC, and controller), and I will provide dimensions, photos, and product information.
The design needs to include:
Mounting system for the motor and water jet
Mounting location for the ESC
Internal water-cooling passages for both the motor and ESC
Water intake that supplies both the jet pump and the cooling system
Water outlet integrated into the rear of the scooter
Waterproof battery compartment
Waterproof electronics compartment
Ergonomic handle that houses the throttle/controller
Internal supports and mounting points
A shell optimized for 3D printing and future modifications
Fusion 360 source files and STEP files
I would also like you to make the shell split into upper and lower halves with an O-ring seal and stainless fasteners so the battery and electronics are accessible for maintenance.
I already... read more
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I already have an STL of the exterior shell that I would like to use as a starting point or reference. The final design should be an editable CAD model (Fusion 360 preferred) with STEP files included.
The propulsion system has already been chosen (motor, water jet, ESC, and controller), and I will provide dimensions, photos, and product information.
The design needs to include:
Mounting system for the motor and water jet
Mounting location for the ESC
Internal water-cooling passages for both the motor and ESC
Water intake that supplies both the jet pump and the cooling system
Water outlet integrated into the rear of the scooter
Waterproof battery compartment
Waterproof electronics compartment
Ergonomic handle that houses the throttle/controller
Internal supports and mounting points
A shell optimized for 3D printing and future modifications
Fusion 360 source files and STEP files
I would also like you to make the shell split into upper and lower halves with an O-ring seal and stainless fasteners so the battery and electronics are accessible for maintenance.
I already... read more
I am looking for an experienced CAD designer or mechanical engineer to design a custom underwater scooter (similar to a Seabob) around a propulsion system that I have already selected.
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I already have an STL of the exterior shell that I would like to use as a starting point or reference. The final design should be an editable CAD model (Fusion 360 preferred) with STEP files included.
The propulsion system has already been chosen (motor, water jet, ESC, and controller), and I will provide dimensions, photos, and product information.
The design needs to include:
Mounting system for the motor and water jet
Mounting location for the ESC
Internal water-cooling passages for both the motor and ESC
Water intake that supplies both the jet pump and the cooling system
Water outlet integrated into the rear of the scooter
Waterproof battery compartment
Waterproof electronics compartment
Ergonomic handle that houses the throttle/controller
Internal supports and mounting points
A shell optimized for 3D printing and future modifications
Fusion 360 source files and STEP files
I would also like you to make the shell split into upper and lower halves with an O-ring seal and stainless fasteners so the battery and electronics are accessible for maintenance.
I already have the propulsion system selected (Maytech 13 kW water jet kit) and will provide the STL shell and reference images.
This is a personal hobby project, not a commercial product. My total budget is under $1,000, and I am looking for someone who can complete the entire design within that budget. If you have experience designing underwater vehicles, RC boats, jetboards, eFoils, or other watercraft, please include examples of your previous work.
Here is a link to the motor, https://maytech.cn/products/maytech-13kw-water-jet-kit-with-60v-72v-300a-esc-v3-mtskr1905wf-remote-for-jetsurf-jetboard-underwater-thruster
If you need any more information please contact me. read less
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I already have an STL of the exterior shell that I would like to use as a starting point or reference. The final design should be an editable CAD model (Fusion 360 preferred) with STEP files included.
The propulsion system has already been chosen (motor, water jet, ESC, and controller), and I will provide dimensions, photos, and product information.
The design needs to include:
Mounting system for the motor and water jet
Mounting location for the ESC
Internal water-cooling passages for both the motor and ESC
Water intake that supplies both the jet pump and the cooling system
Water outlet integrated into the rear of the scooter
Waterproof battery compartment
Waterproof electronics compartment
Ergonomic handle that houses the throttle/controller
Internal supports and mounting points
A shell optimized for 3D printing and future modifications
Fusion 360 source files and STEP files
I would also like you to make the shell split into upper and lower halves with an O-ring seal and stainless fasteners so the battery and electronics are accessible for maintenance.
I already have the propulsion system selected (Maytech 13 kW water jet kit) and will provide the STL shell and reference images.
This is a personal hobby project, not a commercial product. My total budget is under $1,000, and I am looking for someone who can complete the entire design within that budget. If you have experience designing underwater vehicles, RC boats, jetboards, eFoils, or other watercraft, please include examples of your previous work.
Here is a link to the motor, https://maytech.cn/products/maytech-13kw-water-jet-kit-with-60v-72v-300a-esc-v3-mtskr1905wf-remote-for-jetsurf-jetboard-underwater-thruster
If you need any more information please contact me. read less
I am looking for an experienced CAD designer or mechanical engineer to design a custom underwater scooter (similar to a Seabob) around a propulsion system that I have already selected.
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I alr... read more
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I alr... read more
I am looking for an experienced CAD designer or mechanical engineer to design a custom underwater scooter (similar to a Seabob) around a propulsion system that I have already selected.
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I already have an STL of the exterior shell that I would like to use as a starting point or reference. The final design should be an editable CAD model (Fusion 360 preferred) with STEP files included.
The propulsion system has already been chosen (motor, water jet, ESC, and controller), and I will provide dimensions, photos, and product information.
The design needs to include:
Mounting system for the motor and water jet
Mounting location for the ESC
Internal water-cooling passages for both the motor and ESC
Water intake that supplies both the jet pump and the cooling system
Water outlet integrated into the rear of the scooter
Waterproof battery compartment
Waterproof electronics compartment
Ergonomic handle that houses the throttle/controller
Internal supports and mounting points
A shell optimized for 3D printing and future modifications
Fusion 360 source files and STEP files
I would also like you to make the shell split into upper and lower halves with an O-ring seal and stainless fasteners so the battery and electronics are accessible for maintenance.
I already have the propulsion system selected (Maytech 13 kW water jet kit) and will provide the STL shell and reference images.
This is a personal hobby project, not a commercial product. My total budget is under $1,000, and I am looking for someone who can complete the entire design within that budget. If you have experience designing underwater vehicles, RC boats, jetboards, eFoils, or other watercraft, please include examples of your previous work.
Here is a link to the motor, https://maytech.cn/products/maytech-13kw-water-jet-kit-with-60v-72v-300a-esc-v3-mtskr1905wf-remote-for-jetsurf-jetboard-underwater-thruster
If you need any more information please contact me. read less
The propulsion system (motor, jet pump, ESC, and throttle) has already been selected. The shell should be designed specifically around this hardware, with proper mounting points and water-cooling passages.
I already have an STL of the exterior shell that I would like to use as a starting point or reference. The final design should be an editable CAD model (Fusion 360 preferred) with STEP files included.
The propulsion system has already been chosen (motor, water jet, ESC, and controller), and I will provide dimensions, photos, and product information.
The design needs to include:
Mounting system for the motor and water jet
Mounting location for the ESC
Internal water-cooling passages for both the motor and ESC
Water intake that supplies both the jet pump and the cooling system
Water outlet integrated into the rear of the scooter
Waterproof battery compartment
Waterproof electronics compartment
Ergonomic handle that houses the throttle/controller
Internal supports and mounting points
A shell optimized for 3D printing and future modifications
Fusion 360 source files and STEP files
I would also like you to make the shell split into upper and lower halves with an O-ring seal and stainless fasteners so the battery and electronics are accessible for maintenance.
I already have the propulsion system selected (Maytech 13 kW water jet kit) and will provide the STL shell and reference images.
This is a personal hobby project, not a commercial product. My total budget is under $1,000, and I am looking for someone who can complete the entire design within that budget. If you have experience designing underwater vehicles, RC boats, jetboards, eFoils, or other watercraft, please include examples of your previous work.
Here is a link to the motor, https://maytech.cn/products/maytech-13kw-water-jet-kit-with-60v-72v-300a-esc-v3-mtskr1905wf-remote-for-jetsurf-jetboard-underwater-thruster
If you need any more information please contact me. read less
Things to know
Intermediate
Skill Level
$1,250
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Printing
CAD Design
CFD
Fusion 360
Mechanical Engineering
Product Design
Reverse Engineering
+4 more
Job categories
Product Engineering Services
Mechanical Design Services
3D Printing Design
3D Design Services
3D Modeling
+2 more
About the client
Payment not ready
United States (03:33 am)
Posted
Active
Job activity
13 Applicants
0 interviews in progress
Similar jobs
Jewelry CAD Designer (Rhino & Matrix) – 3 to 5 Years Experience
Jaipur, India - Posted
We are looking for an experienced Jewelry CAD Designer for ongoing work designing high-quality fine jewelry. The ideal candidate should have 3–5 years of professional experien...
3D Jewelry Rendering
Jewelry Design
3D Modeling
View job
Only interior design for 2.5 BHK
Remote - Posted
I need interior designer for my 2.5 BHK in Dhanori Pune. It include all interior designs as per requirements and support for laminate selections.
Interior Design
3D Interior Rendering
3D Design Services
View job
Create Printable A4 Paper/Cardboard Templates for STEM Classroom Projects
Remote - Posted
Hello,
I'm a Grade 6 teacher in Chiangmai creating hands-on 3D hands on classroom projects.
I'm looking for a CAD designer who can create simple printable A4 paper templat...
2D to 3D Conversion Services
3D Design Services
3D Modeling
View job
Compact Wearable IoT Device — Mechanical Housing CAD + Schematic Capture + PCB Layout (Nordic nRF52832, BLE 5.0)
Remote - Posted
We are a New Jersey-based product development company seeking a highly capable engineer — or a small coordinated team — to complete the full hardware package for a compact, mu...
Internet of Things (IoT)
Mechanical Design Services
PCB Design Services
Electronics Design Service
Wearables Design
View job
PROJECT TRIAL
Remote - Posted
As discussed a trial project for 3 sheets to be completed.
2D CAD Design Services
3D Design Services
3D Modeling
View job
PDF to DWG/CAD
Remote - Posted
I am looking for a CAD designer to recreate a series of technical PDF drawings for a small business developing premium wooden children's toys.
The drawings are currently in...
AutoCAD Conversion Services
PDF to DWG Conversion
3D Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
202,059
global members
33,257
projects delivered to clients
Trusted by
