Remote
Work location
Industrial & Mechanical Design for Premium Dual-Face Panorama LED Photo Cube Anyone
About the job
I am developing a premium 14 × 14 × 14 cm ambient lighting and photo-display cube with a thin integrated base.
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.
The image lighting and colored ambient lighting must be electrically and optically separated so that the RGBW light does not affect skin tones, photograph colors, contrast, or image clarity.
The main additional design requirement is a practical replaceable cartridge system for both image faces.
The preferred direction is:
One flat rigid acrylic cartridge for the front face
One flat rigid acrylic cartridge for the right face
Both cartridges are created from the same panoramic image and installed as one matched set
One concealed physical release button integrated into the base
Pressing the button releases both cartridges at the same time
The front cartridge moves slightly forward
The right cartridge moves slightly outward
The user then removes and inserts the two cartridges separately
The cartridges must return to a precise aligned position without visible looseness or uneven gaps
The designer should also evaluate whether a single rigid L-shaped cartridge covering both the front and right faces is realistically manufacturable and user-friendly. However, ease of replacemen... read more
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.
The image lighting and colored ambient lighting must be electrically and optically separated so that the RGBW light does not affect skin tones, photograph colors, contrast, or image clarity.
The main additional design requirement is a practical replaceable cartridge system for both image faces.
The preferred direction is:
One flat rigid acrylic cartridge for the front face
One flat rigid acrylic cartridge for the right face
Both cartridges are created from the same panoramic image and installed as one matched set
One concealed physical release button integrated into the base
Pressing the button releases both cartridges at the same time
The front cartridge moves slightly forward
The right cartridge moves slightly outward
The user then removes and inserts the two cartridges separately
The cartridges must return to a precise aligned position without visible looseness or uneven gaps
The designer should also evaluate whether a single rigid L-shaped cartridge covering both the front and right faces is realistically manufacturable and user-friendly. However, ease of replacemen... read more
I am developing a premium 14 × 14 × 14 cm ambient lighting and photo-display cube with a thin integrated base.
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.
The image lighting and colored ambient lighting must be electrically and optically separated so that the RGBW light does not affect skin tones, photograph colors, contrast, or image clarity.
The main additional design requirement is a practical replaceable cartridge system for both image faces.
The preferred direction is:
One flat rigid acrylic cartridge for the front face
One flat rigid acrylic cartridge for the right face
Both cartridges are created from the same panoramic image and installed as one matched set
One concealed physical release button integrated into the base
Pressing the button releases both cartridges at the same time
The front cartridge moves slightly forward
The right cartridge moves slightly outward
The user then removes and inserts the two cartridges separately
The cartridges must return to a precise aligned position without visible looseness or uneven gaps
The designer should also evaluate whether a single rigid L-shaped cartridge covering both the front and right faces is realistically manufacturable and user-friendly. However, ease of replacement, reliability, image alignment, production cost, and durability are more important than forcing a one-piece solution.
The exterior should remain minimal, refined, and premium rather than looking like a gaming RGB cube or a low-cost photo lamp. The product must look attractive both powered on and powered off.
Other key requirements include:
Soft Coral White, Aqua White, and Lavender White lighting channels
Independent control of the cube-body light and image backlights
Slow bottom-to-top startup illumination
Concealed controls and power connection
NFC or another cartridge identification method
Warm light wood and soft champagne-metal base options
Large image areas with minimal borders
Clean appearance on all visible sides
No visible LED dots, hotspots, harsh color bands, or exposed internal components
The existing development specification PDF will be provided as the primary reference.
I am looking for an experienced industrial or mechanical designer who can develop:
Revised exterior design
Cartridge-release mechanism
Internal structure and optical separation
Production-ready 3D CAD
Exploded and sectional views
Realistic product renderings
Prototype-ready drawings and component recommendations read less
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.
The image lighting and colored ambient lighting must be electrically and optically separated so that the RGBW light does not affect skin tones, photograph colors, contrast, or image clarity.
The main additional design requirement is a practical replaceable cartridge system for both image faces.
The preferred direction is:
One flat rigid acrylic cartridge for the front face
One flat rigid acrylic cartridge for the right face
Both cartridges are created from the same panoramic image and installed as one matched set
One concealed physical release button integrated into the base
Pressing the button releases both cartridges at the same time
The front cartridge moves slightly forward
The right cartridge moves slightly outward
The user then removes and inserts the two cartridges separately
The cartridges must return to a precise aligned position without visible looseness or uneven gaps
The designer should also evaluate whether a single rigid L-shaped cartridge covering both the front and right faces is realistically manufacturable and user-friendly. However, ease of replacement, reliability, image alignment, production cost, and durability are more important than forcing a one-piece solution.
The exterior should remain minimal, refined, and premium rather than looking like a gaming RGB cube or a low-cost photo lamp. The product must look attractive both powered on and powered off.
Other key requirements include:
Soft Coral White, Aqua White, and Lavender White lighting channels
Independent control of the cube-body light and image backlights
Slow bottom-to-top startup illumination
Concealed controls and power connection
NFC or another cartridge identification method
Warm light wood and soft champagne-metal base options
Large image areas with minimal borders
Clean appearance on all visible sides
No visible LED dots, hotspots, harsh color bands, or exposed internal components
The existing development specification PDF will be provided as the primary reference.
I am looking for an experienced industrial or mechanical designer who can develop:
Revised exterior design
Cartridge-release mechanism
Internal structure and optical separation
Production-ready 3D CAD
Exploded and sectional views
Realistic product renderings
Prototype-ready drawings and component recommendations read less
I am developing a premium 14 × 14 × 14 cm ambient lighting and photo-display cube with a thin integrated base.
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.... read more
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.... read more
I am developing a premium 14 × 14 × 14 cm ambient lighting and photo-display cube with a thin integrated base.
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.
The image lighting and colored ambient lighting must be electrically and optically separated so that the RGBW light does not affect skin tones, photograph colors, contrast, or image clarity.
The main additional design requirement is a practical replaceable cartridge system for both image faces.
The preferred direction is:
One flat rigid acrylic cartridge for the front face
One flat rigid acrylic cartridge for the right face
Both cartridges are created from the same panoramic image and installed as one matched set
One concealed physical release button integrated into the base
Pressing the button releases both cartridges at the same time
The front cartridge moves slightly forward
The right cartridge moves slightly outward
The user then removes and inserts the two cartridges separately
The cartridges must return to a precise aligned position without visible looseness or uneven gaps
The designer should also evaluate whether a single rigid L-shaped cartridge covering both the front and right faces is realistically manufacturable and user-friendly. However, ease of replacement, reliability, image alignment, production cost, and durability are more important than forcing a one-piece solution.
The exterior should remain minimal, refined, and premium rather than looking like a gaming RGB cube or a low-cost photo lamp. The product must look attractive both powered on and powered off.
Other key requirements include:
Soft Coral White, Aqua White, and Lavender White lighting channels
Independent control of the cube-body light and image backlights
Slow bottom-to-top startup illumination
Concealed controls and power connection
NFC or another cartridge identification method
Warm light wood and soft champagne-metal base options
Large image areas with minimal borders
Clean appearance on all visible sides
No visible LED dots, hotspots, harsh color bands, or exposed internal components
The existing development specification PDF will be provided as the primary reference.
I am looking for an experienced industrial or mechanical designer who can develop:
Revised exterior design
Cartridge-release mechanism
Internal structure and optical separation
Production-ready 3D CAD
Exploded and sectional views
Realistic product renderings
Prototype-ready drawings and component recommendations read less
The product should display one continuous personal image or panoramic scene across the front and right faces of the cube. The front and right image areas use independent high-quality neutral-white backlighting, while the top, left, rear, edges, and lower areas create soft RGBW gradients.
The image lighting and colored ambient lighting must be electrically and optically separated so that the RGBW light does not affect skin tones, photograph colors, contrast, or image clarity.
The main additional design requirement is a practical replaceable cartridge system for both image faces.
The preferred direction is:
One flat rigid acrylic cartridge for the front face
One flat rigid acrylic cartridge for the right face
Both cartridges are created from the same panoramic image and installed as one matched set
One concealed physical release button integrated into the base
Pressing the button releases both cartridges at the same time
The front cartridge moves slightly forward
The right cartridge moves slightly outward
The user then removes and inserts the two cartridges separately
The cartridges must return to a precise aligned position without visible looseness or uneven gaps
The designer should also evaluate whether a single rigid L-shaped cartridge covering both the front and right faces is realistically manufacturable and user-friendly. However, ease of replacement, reliability, image alignment, production cost, and durability are more important than forcing a one-piece solution.
The exterior should remain minimal, refined, and premium rather than looking like a gaming RGB cube or a low-cost photo lamp. The product must look attractive both powered on and powered off.
Other key requirements include:
Soft Coral White, Aqua White, and Lavender White lighting channels
Independent control of the cube-body light and image backlights
Slow bottom-to-top startup illumination
Concealed controls and power connection
NFC or another cartridge identification method
Warm light wood and soft champagne-metal base options
Large image areas with minimal borders
Clean appearance on all visible sides
No visible LED dots, hotspots, harsh color bands, or exposed internal components
The existing development specification PDF will be provided as the primary reference.
I am looking for an experienced industrial or mechanical designer who can develop:
Revised exterior design
Cartridge-release mechanism
Internal structure and optical separation
Production-ready 3D CAD
Exploded and sectional views
Realistic product renderings
Prototype-ready drawings and component recommendations read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
1-3 months
Job duration
Areas of expertise
3D Industrial Design
CAD / CAD Design
Design 3D
Engineering Design
Engineering Services
Mechanical Design
Prototype Design
SolidWorks
Solidwork
+6 more
Job categories
Mechanical CAD Design
Industrial Design Services
Product Engineering Services
3D Product Modeling
Mechanical Design Services
+2 more
About the client
Payment ready
South Korea (03:51 am)
Posted
Active
Job activity
17 Applicants
1 interviews in progress
More open jobs from this client (3)
Develop a Replaceable Acrylic 3D Photo Diorama Cartridge With Light Reveal
Remote - Posted
I am developing a premium illuminated display product with a replaceable acrylic photo cartridge. The cartridge will be inserted into the front of a small lighting object or f...
Photorealistic Rendering
Industrial Design Services
Design for Manufacturing and Assembly
Prototype Design Services
View job
Product Engineering and Physical Prototyping of a Layered Diorama Lighting Object
Remote - Posted
Hello,
I am looking for an experienced individual developer or multidisciplinary engineering team to design, develop, physically prototype, test, optimize, and ship one compl...
Industrial Design Services
3D Product Modeling
3D Modeling
3D Design Services
View job
End-to-End Development of Premium LED Ambient Lighting Cube with Replaceable 3-Layer Diorama Prototype
Remote - Posted
Hello,
I am looking for an experienced individual developer or multidisciplinary engineering team to design, develop, physically prototype, test, optimize, and ship one compl...
Industrial Design Services
3D Product Modeling
3D Modeling
3D Design Services
View job
Similar jobs
Pneumatic Design and installation
Remote - Posted
We are looking for an Engineer who can design and Install Pneumatic piping and valves to our oil storage system
Mechanical Engineering
Mechanical Drafting
Mechanical Design Services
View job
Anode Nipple
South Africa - Posted
design of a leak free Stainless steel anode nipple passing through a hot water tank wall. The housing to accommodate a tempreture sensor, a reference 1/2 cell and the inert An...
Mechanical Design Services
Manufacturing Drawings
3D Design Services
View job
Parametric CAD Expert Needed - 4-Part 3D Printed Device (Pack & Go STEP)
Remote - Posted
Title: Parametric CAD Expert Needed - 4-Part 3D Printed Device (Pack & Go STEP)
Budget: $400 Fixed Price
Project Overview:
Looking for a mechanical engineer to model a 4-...
3D Product Modeling
3D Modeling
3D Printing Design
View job
Modular play bear
United States - Posted
3d cad STL file to get produced at a manufacturer. This requires patience to get it right!!.
Prototype Design Services
3D Product Modeling
3D Modeling
View job
Industrial designer
Remote - Posted
I am looking for an industrial designer to work with me on a product that I am developing to attach to shoes of people who have one leg shorter than the other. There will be a...
Industrial Design Services
Concept Design
Product Engineering Services
View job
Request for mechanical design quotation – panoramic dual-camera enclosure
Remote - Posted
My name is Mohamed Jâafar, and I am based in France. I am developing a self-contained, battery-powered panoramic camera for recording, streaming and analyzing football matches...
Mechanical Design Services
Mechanical CAD Design
Manufacturing Drawings
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
200,814
global members
33,210
projects delivered to clients
Trusted by
