Remote
Work location
Commercial Kitchen Permit Drawings (Fire Escape & Hood Layout) Ended
About the job
**Job Description:**
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance with the **National Building Code of Canada (NBC)** and local fire regulations
* Make or change the **kitchen hood and ventilation drawings** to meet the requirements of **NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations)** and any other Canadian standards that apply.
* Show **emergency exits, exit widths, travel distances, signage, and lighting** according to the rules
* Ensure **fire safety compliance**, including clearances, fire-rated assemblies, and suppression system coordination
* Update drawings based on any feedback from local authorities (City/Fire Department)
**Requirements:**
* Experience with **Canadian commercial kitchen permit drawings**
* Strong knowledge of **NBC (National Building Code of Canada)** and fire safety requirements
* Familiarity with **NFPA 96** and kitchen ventilation standards
* Proficiency in AutoCAD or similar CAD software
* Ability to deliver clear, accurate, and permit-ready drawings
**Additional Information:**
* Kitchen is already constructed; this work is for compliance and permit a... read more
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance with the **National Building Code of Canada (NBC)** and local fire regulations
* Make or change the **kitchen hood and ventilation drawings** to meet the requirements of **NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations)** and any other Canadian standards that apply.
* Show **emergency exits, exit widths, travel distances, signage, and lighting** according to the rules
* Ensure **fire safety compliance**, including clearances, fire-rated assemblies, and suppression system coordination
* Update drawings based on any feedback from local authorities (City/Fire Department)
**Requirements:**
* Experience with **Canadian commercial kitchen permit drawings**
* Strong knowledge of **NBC (National Building Code of Canada)** and fire safety requirements
* Familiarity with **NFPA 96** and kitchen ventilation standards
* Proficiency in AutoCAD or similar CAD software
* Ability to deliver clear, accurate, and permit-ready drawings
**Additional Information:**
* Kitchen is already constructed; this work is for compliance and permit a... read more
**Job Description:**
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance with the **National Building Code of Canada (NBC)** and local fire regulations
* Make or change the **kitchen hood and ventilation drawings** to meet the requirements of **NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations)** and any other Canadian standards that apply.
* Show **emergency exits, exit widths, travel distances, signage, and lighting** according to the rules
* Ensure **fire safety compliance**, including clearances, fire-rated assemblies, and suppression system coordination
* Update drawings based on any feedback from local authorities (City/Fire Department)
**Requirements:**
* Experience with **Canadian commercial kitchen permit drawings**
* Strong knowledge of **NBC (National Building Code of Canada)** and fire safety requirements
* Familiarity with **NFPA 96** and kitchen ventilation standards
* Proficiency in AutoCAD or similar CAD software
* Ability to deliver clear, accurate, and permit-ready drawings
**Additional Information:**
* Kitchen is already constructed; this work is for compliance and permit approval
* I will provide measurements, photos, and any existing layouts
* Preference for someone familiar with **Manitoba/local authority requirements**
Please share your relevant experience and sample work. Let me know if you need more details.
Thank you! read less
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance with the **National Building Code of Canada (NBC)** and local fire regulations
* Make or change the **kitchen hood and ventilation drawings** to meet the requirements of **NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations)** and any other Canadian standards that apply.
* Show **emergency exits, exit widths, travel distances, signage, and lighting** according to the rules
* Ensure **fire safety compliance**, including clearances, fire-rated assemblies, and suppression system coordination
* Update drawings based on any feedback from local authorities (City/Fire Department)
**Requirements:**
* Experience with **Canadian commercial kitchen permit drawings**
* Strong knowledge of **NBC (National Building Code of Canada)** and fire safety requirements
* Familiarity with **NFPA 96** and kitchen ventilation standards
* Proficiency in AutoCAD or similar CAD software
* Ability to deliver clear, accurate, and permit-ready drawings
**Additional Information:**
* Kitchen is already constructed; this work is for compliance and permit approval
* I will provide measurements, photos, and any existing layouts
* Preference for someone familiar with **Manitoba/local authority requirements**
Please share your relevant experience and sample work. Let me know if you need more details.
Thank you! read less
**Job Description:**
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance w... read more
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance w... read more
**Job Description:**
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance with the **National Building Code of Canada (NBC)** and local fire regulations
* Make or change the **kitchen hood and ventilation drawings** to meet the requirements of **NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations)** and any other Canadian standards that apply.
* Show **emergency exits, exit widths, travel distances, signage, and lighting** according to the rules
* Ensure **fire safety compliance**, including clearances, fire-rated assemblies, and suppression system coordination
* Update drawings based on any feedback from local authorities (City/Fire Department)
**Requirements:**
* Experience with **Canadian commercial kitchen permit drawings**
* Strong knowledge of **NBC (National Building Code of Canada)** and fire safety requirements
* Familiarity with **NFPA 96** and kitchen ventilation standards
* Proficiency in AutoCAD or similar CAD software
* Ability to deliver clear, accurate, and permit-ready drawings
**Additional Information:**
* Kitchen is already constructed; this work is for compliance and permit approval
* I will provide measurements, photos, and any existing layouts
* Preference for someone familiar with **Manitoba/local authority requirements**
Please share your relevant experience and sample work. Let me know if you need more details.
Thank you! read less
I am looking for an experienced CAD designer/drafter to prepare permit drawings for a commercial kitchen located in Manitoba, Canada. The kitchen is already installed, and I need professional drawings updated to meet Canadian fire and safety codes in order to obtain an operational permit.
**Scope of Work:**
* Prepare a detailed **fire escape route plan** in compliance with the **National Building Code of Canada (NBC)** and local fire regulations
* Make or change the **kitchen hood and ventilation drawings** to meet the requirements of **NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations)** and any other Canadian standards that apply.
* Show **emergency exits, exit widths, travel distances, signage, and lighting** according to the rules
* Ensure **fire safety compliance**, including clearances, fire-rated assemblies, and suppression system coordination
* Update drawings based on any feedback from local authorities (City/Fire Department)
**Requirements:**
* Experience with **Canadian commercial kitchen permit drawings**
* Strong knowledge of **NBC (National Building Code of Canada)** and fire safety requirements
* Familiarity with **NFPA 96** and kitchen ventilation standards
* Proficiency in AutoCAD or similar CAD software
* Ability to deliver clear, accurate, and permit-ready drawings
**Additional Information:**
* Kitchen is already constructed; this work is for compliance and permit approval
* I will provide measurements, photos, and any existing layouts
* Preference for someone familiar with **Manitoba/local authority requirements**
Please share your relevant experience and sample work. Let me know if you need more details.
Thank you! read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D Mechanical Drawing
2D & 3D architectural layouts
Job categories
Mechanical CAD Design
About the client
Payment not ready
Canada (07:55 am)
Posted
Active
Job activity
17 Applicants
0 interviews in progress
3 unanswered invites
Similar jobs
3D surfacing & solid modeling
Remote - Posted
I need someone that can use these multiple CAD files to create a common nesting block. It should look similar to the sections that I have created, but I would like it to be a...
3D Modeling
3D Solid Modeling
Mechanical CAD Design
View job
Mechanical engineer API 6A fluent for gate valve design - USA only.
Remote - Posted
Take our Globally Patented gate valve series and create all configurations in API - 6A standards! Everything from 1 13/16 10M - 7 1/16 15M sizes.
Mechanical CAD Design
2D to 3D Modeling
Mechanical Design Services
View job
Mechanical Engineer / Product Designer Needed — Folding Chair Mechanism & CAD Development
Remote - Posted
Project Overview
We are developing a premium, lightweight, durable folding outdoor/camping chair where the frame, joints, hardware, fabric, and accessories are engineered for...
Product Engineering Services
3D Modeling
Mechanical Design Services
Mechanical CAD Design
Machine Design
View job
CAD DESIGNER
Hyderabad, India - Posted
Work includes:
3D CAD design of machine casing
Sheet-metal enclosure design
Laser cutting & bending drawings
Panel/service access design
Integration of touchscreen, swi...
Design & Drafting
3D Design Services
Mechanical CAD Design
Drafting and Design Services
View job
CREO Expert needed
Remote - Posted
Hi, we are looking for an experienced PTC Creo mechanical designer / mechanical design engineer in the Las Vegas area for an automotive/aerospace prototype project.
The pro...
Creo Design Services
Mechanical CAD Design
3D Design Services
View job
Mechanical Product Designer Needed – 4-Position Captured Slider Mechanism for Consumer Product
Remote - Posted
I need help designing a small manual mechanical slider for a consumer product.
The slider will have four positions:
AM | MIDDAY | PM | DONE
Requirements:
Approximately...
Mechanical CAD Design
Mechanical Design Services
Product Engineering Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
213,121
global members
33,430
projects delivered to clients
Trusted by
