United States
Work location
Requirement: 450L LNG Cryogenic Tank Design with PESO Compliance Anyone
About the job
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensor... read more
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensor... read more
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tan... read more
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tan... read more
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Things to know
Expert
Skill Level
Open budget
Hourly
Part-time
Job type
6+ months
Job duration
Areas of expertise
Fuel Storage Tanks
Gas Pipeline Design
Natural Gas Calculation
Oil & Gas
Oil & Gas Platform Design
Oil and Gas
+3 more
Job categories
Structural Design Services
Mechanical Design Services
Mechanical Engineering
Structural Engineering
Design Engineering Services
+2 more
Languages
Marathi
Professional working proficiency
About the client
Payment not ready
India (04:55 am)
Posted
Active
Job activity
0 Applicants
0 interviews in progress
Similar jobs
Test task for Mobile Ground Robotics Project
Remote - Posted
This is a test task for Mobile Ground Robotics Project.
Attached archive contains unfinished assembly and technical task description PDF file.
Before You Start
Open prov...
3D Modeling
Mechanical Design Services
SolidWorks Engineering Services
View job
Tolerance stack up analysis
Remote - Posted
Tolerance stack up analysis needed of two parts held together by snap features with a gasket in between. Estimation is 1-2 hours
Mechanical Engineering
Mechanical Design Services
View job
Edits to Design
Delhi, India - Posted
We are looking for someone based in New Delhi , who can design for a cabinet and also visit our office to check the components and the existing cabinet.
Design & Drafting
Drafting and Design Services
General Design
Hourly Services
Design Engineering Services
View job
SolidWorks Revision & Continuation Needed for Existing Mobile Ground Robotics Project
Remote - Posted
We are seeking an experienced Mechanical/CAD Engineer to join an ongoing mobile ground robotics development project. The project is currently in progress and requires a skille...
SolidWorks Design Services
Mechanical Engineering
Mechanical Design Services
Design Engineering Services
View job
Mechanical Engineering & CAD Design for Automatic Pizza Vending Machine
Remote - Posted
Job description:
Design the internal storage and dispensing mechanism.
Integrate the heating/oven system with thermal insulation.
Select food-grade materials compliant with...
3D Modeling
Mechanical Design Services
Mechanical Engineering
3D Product Rendering and Design
View job
Robotics Planning Specialist (Industrial Robots, AMR, AGF & Cleaning Robots)
Remote - Posted
We are seeking an experienced industrial automation / machine design expert to develop a fully autonomous packaging system for printed label rolls using robotic arms. The curr...
Industrial Design Services
Mechanical Design Services
Robotics Design Services
View job
