Remote
Work location
Convert architectural drawings to CAD files Ended
About the job
I have 3 scanned bitmap drawings of an existing single-storey house that I need converted into precise CAD vector files.
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from the scans
- Floor plan with all walls, doors and windows in correct positions
- All four facades
- Delivery as .DWG and/or .DXF (AutoCAD compatible)
- All text and dimension annotations not needed from the drawings (I only need the geometry)
Purpose:
The drawings will be used as a basis for planning possible renovations and extensions to the house, so geometric accuracy is essential.
Notes:
- All key dimensions are already marked on the floor plan scan, so there should be no guesswork
- This is a straightforward single-storey house with no complex geometry
- I estimate this is approx. 2–4 hours of work for an experienced CAD drafter
- No hard deadline yet.
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from the scans
- Floor plan with all walls, doors and windows in correct positions
- All four facades
- Delivery as .DWG and/or .DXF (AutoCAD compatible)
- All text and dimension annotations not needed from the drawings (I only need the geometry)
Purpose:
The drawings will be used as a basis for planning possible renovations and extensions to the house, so geometric accuracy is essential.
Notes:
- All key dimensions are already marked on the floor plan scan, so there should be no guesswork
- This is a straightforward single-storey house with no complex geometry
- I estimate this is approx. 2–4 hours of work for an experienced CAD drafter
- No hard deadline yet.
I have 3 scanned bitmap drawings of an existing single-storey house that I need converted into precise CAD vector files.
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from the scans
- Floor plan with all walls, doors and windows in correct positions
- All four facades
- Delivery as .DWG and/or .DXF (AutoCAD compatible)
- All text and dimension annotations not needed from the drawings (I only need the geometry)
Purpose:
The drawings will be used as a basis for planning possible renovations and extensions to the house, so geometric accuracy is essential.
Notes:
- All key dimensions are already marked on the floor plan scan, so there should be no guesswork
- This is a straightforward single-storey house with no complex geometry
- I estimate this is approx. 2–4 hours of work for an experienced CAD drafter
- No hard deadline yet.
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from the scans
- Floor plan with all walls, doors and windows in correct positions
- All four facades
- Delivery as .DWG and/or .DXF (AutoCAD compatible)
- All text and dimension annotations not needed from the drawings (I only need the geometry)
Purpose:
The drawings will be used as a basis for planning possible renovations and extensions to the house, so geometric accuracy is essential.
Notes:
- All key dimensions are already marked on the floor plan scan, so there should be no guesswork
- This is a straightforward single-storey house with no complex geometry
- I estimate this is approx. 2–4 hours of work for an experienced CAD drafter
- No hard deadline yet.
I have 3 scanned bitmap drawings of an existing single-storey house that I need converted into precise CAD vector files.
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from t... read more
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from t... read more
I have 3 scanned bitmap drawings of an existing single-storey house that I need converted into precise CAD vector files.
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from the scans
- Floor plan with all walls, doors and windows in correct positions
- All four facades
- Delivery as .DWG and/or .DXF (AutoCAD compatible)
- All text and dimension annotations not needed from the drawings (I only need the geometry)
Purpose:
The drawings will be used as a basis for planning possible renovations and extensions to the house, so geometric accuracy is essential.
Notes:
- All key dimensions are already marked on the floor plan scan, so there should be no guesswork
- This is a straightforward single-storey house with no complex geometry
- I estimate this is approx. 2–4 hours of work for an experienced CAD drafter
- No hard deadline yet. read less
What I'm providing:
- Floor plan with full dimensions (all measurements in mm)
- All four facade drawings (West, East, South, North)
- The house is a single-storey building, approx. 17 × 8 with a gabled roof
What I need:
- Clean, accurate 2D CAD drawings redrawn from the scans
- Floor plan with all walls, doors and windows in correct positions
- All four facades
- Delivery as .DWG and/or .DXF (AutoCAD compatible)
- All text and dimension annotations not needed from the drawings (I only need the geometry)
Purpose:
The drawings will be used as a basis for planning possible renovations and extensions to the house, so geometric accuracy is essential.
Notes:
- All key dimensions are already marked on the floor plan scan, so there should be no guesswork
- This is a straightforward single-storey house with no complex geometry
- I estimate this is approx. 2–4 hours of work for an experienced CAD drafter
- No hard deadline yet. read less
Things to know
Any
Skill Level
$100
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D CAD Drawings
Job categories
Image to CAD Conversion Services
About the client
Payment ready
Denmark (07:58 pm)
Posted
Active
Job activity
79 Applicants
2 interviews in progress
Similar jobs
Nikon J5 Electronic ViewFinder (EVF)
San Francisco, United States - Posted
I have a little pocket camera I love, but I've always wanted to have an EVF! I've bought the electronics and confirmed it works (plugs into the mini HDMI port on the side), bu...
3D Modeling
Image to CAD Conversion Services
3D Printing Services
View job
2D CAD Draftsperson / Technical Pattern Maker for Leather Goods
Remote - Posted
Engagement: Contract / freelance, remote (project-based)
Primary deliverable: Production-ready, layered DXF cut files for clicker dies and laser cutting and corresponding P...
2D CAD Drafting Services
CAD Drawing Services
Image to CAD Conversion Services
Paper to CAD Conversion
Fashion Design
View job
3d Mesh from Video
Remote - Posted
Budget: $125
Timeline: May 6th, 2026 Delivery
Hiring: 1 Time Project basis with full time possible
Overview:
We are seeking a 3D modeler to convert a short video-based sca...
Image to CAD Conversion Services
Photorealistic Rendering
3D Modeling
View job
transfer a detail drawing from paper to AutoCad
Remote - Posted
I have a part drawing that needs to be transferred from a paper into AutoCad. It’s a one time job.
Image to CAD Conversion Services
Paper to AutoCAD Conversion
CAD Digitization Services
View job
Manual CAD Redraw of Boat from Photos — CNC-Ready Vector Geometry
Remote - Posted
I am looking for a CAD professional to manually redraw a small boat from reference photos into clean, CNC-ready 2D vector geometry.
The output will be used directly for CNC...
2D CAD Drafting Services
Image to CAD Conversion Services
CAD Redrafting and Conversion Services
Naval Architecture Design
View job
Image to Printable 3D CAD
Remote - Posted
Need the CAD File as a prototype. Need the stl file to be converted to a printable 3d version in a 3DM File format. The 3D Artist should be highly skilled in Auto CAD.
Image to CAD Conversion Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
194,881
global members
32,773
projects delivered to clients
Trusted by
