Remote
Work location
3D Modeling & Simple PCB Design - Outdoor Sensor Prototype Ended
About the job
I am looking for a freelancer to assist with a small academic/field-test project. This is a low-budget task that involves two integrated parts:
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integration: The board must integrate an ESP32-C3, SHT40 air sensor, LIS3DH accelerometer, and a basic subcircuit consisting of one MOSFET and two resistors.
Connectors: The PCB requires JST connectors for a 18650 battery and external soil sensors.
Manufacturing: The final PCB file must be in Gerber format, ready for fabrication.
CAD Deliverables: The 3D model should be delivered as a STEP file or an Onshape document link.
Notes
This is a fixed-price project for a prototype. All dimensions and the circuit logic are already defined.
The hand-drawn sketch and detailed technical requirements will be shared with the selected freelancer after the initial contact.
Budget: $70 USD (Fixed Price).
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integration: The board must integrate an ESP32-C3, SHT40 air sensor, LIS3DH accelerometer, and a basic subcircuit consisting of one MOSFET and two resistors.
Connectors: The PCB requires JST connectors for a 18650 battery and external soil sensors.
Manufacturing: The final PCB file must be in Gerber format, ready for fabrication.
CAD Deliverables: The 3D model should be delivered as a STEP file or an Onshape document link.
Notes
This is a fixed-price project for a prototype. All dimensions and the circuit logic are already defined.
The hand-drawn sketch and detailed technical requirements will be shared with the selected freelancer after the initial contact.
Budget: $70 USD (Fixed Price).
I am looking for a freelancer to assist with a small academic/field-test project. This is a low-budget task that involves two integrated parts:
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integration: The board must integrate an ESP32-C3, SHT40 air sensor, LIS3DH accelerometer, and a basic subcircuit consisting of one MOSFET and two resistors.
Connectors: The PCB requires JST connectors for a 18650 battery and external soil sensors.
Manufacturing: The final PCB file must be in Gerber format, ready for fabrication.
CAD Deliverables: The 3D model should be delivered as a STEP file or an Onshape document link.
Notes
This is a fixed-price project for a prototype. All dimensions and the circuit logic are already defined.
The hand-drawn sketch and detailed technical requirements will be shared with the selected freelancer after the initial contact.
Budget: $70 USD (Fixed Price).
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integration: The board must integrate an ESP32-C3, SHT40 air sensor, LIS3DH accelerometer, and a basic subcircuit consisting of one MOSFET and two resistors.
Connectors: The PCB requires JST connectors for a 18650 battery and external soil sensors.
Manufacturing: The final PCB file must be in Gerber format, ready for fabrication.
CAD Deliverables: The 3D model should be delivered as a STEP file or an Onshape document link.
Notes
This is a fixed-price project for a prototype. All dimensions and the circuit logic are already defined.
The hand-drawn sketch and detailed technical requirements will be shared with the selected freelancer after the initial contact.
Budget: $70 USD (Fixed Price).
I am looking for a freelancer to assist with a small academic/field-test project. This is a low-budget task that involves two integrated parts:
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integrat... read more
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integrat... read more
I am looking for a freelancer to assist with a small academic/field-test project. This is a low-budget task that involves two integrated parts:
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integration: The board must integrate an ESP32-C3, SHT40 air sensor, LIS3DH accelerometer, and a basic subcircuit consisting of one MOSFET and two resistors.
Connectors: The PCB requires JST connectors for a 18650 battery and external soil sensors.
Manufacturing: The final PCB file must be in Gerber format, ready for fabrication.
CAD Deliverables: The 3D model should be delivered as a STEP file or an Onshape document link.
Notes
This is a fixed-price project for a prototype. All dimensions and the circuit logic are already defined.
The hand-drawn sketch and detailed technical requirements will be shared with the selected freelancer after the initial contact.
Budget: $70 USD (Fixed Price). read less
3D Modeling: Create a simple hexagonal housing with a height of 5.5 cm. The base must be designed to fit a standard 25 mm PVC pipe.
PCB Design: Develop a straightforward PCB that fits inside the hexagonal head.
Technical Requirements
PCB Integration: The board must integrate an ESP32-C3, SHT40 air sensor, LIS3DH accelerometer, and a basic subcircuit consisting of one MOSFET and two resistors.
Connectors: The PCB requires JST connectors for a 18650 battery and external soil sensors.
Manufacturing: The final PCB file must be in Gerber format, ready for fabrication.
CAD Deliverables: The 3D model should be delivered as a STEP file or an Onshape document link.
Notes
This is a fixed-price project for a prototype. All dimensions and the circuit logic are already defined.
The hand-drawn sketch and detailed technical requirements will be shared with the selected freelancer after the initial contact.
Budget: $70 USD (Fixed Price). read less
Things to know
Any
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D Modeling
3D Printing
CAD Design
Design for Manufacturing
Electronic Engineering
Enclosure Design
Mechanical Engineering
Onshape
PCB Design
sensors
+7 more
Job categories
3D Modeling
PCB Design Services
Prototype Design Services
Product Engineering Services
Electronics Design Service
+2 more
About the client
Payment ready
Brazil (08:33 pm)
Posted
Active
Job activity
0 Applicants
0 interviews in progress
11 unanswered invites
Similar jobs
Toolbox Models & Drawings
Remote - Posted
Please could you quote for the models and drawings for the attached for students to interrupt for there qualification
3D Modeling
CAD Drawing Services
View job
Inventor Facade Designer
Remote - Posted
We are seeking a skilled Inventor Facade Designer with strong expertise in façade systems, architectural detailing, and CAD/3D modeling using Autodesk Inventor. The ideal cand...
3D Modeling
View job
CAD designer needed for modelling of lamps for 3D printing - architecturally inspired
Remote - Posted
Overview
We are looking for an experienced 3D designer to create a print-ready 3D model of a lamp based on provided reference images and a design description. The model wil...
3D Printing Design
3D Modeling
View job
30-50 cad jewellery designs needed
Remote - Posted
Please connect asap, need the job done for cad murti and similar designs kind of antique finish.
2D to 3D Modeling
3D Jewelry Rendering
3D Modeling
View job
Plans for a CNC-cut adjustable sit/stand desk
Remote - Posted
Hello my name is Juan.
I need CAD/DXF plans for a CNC-cut adjustable sit/stand desk in a single design, inspired by Jaswig-style plywood desks.
Requirements:
* CNC-read...
Furniture Design
CNC Programming
3D Modeling
View job
SolidWorks
Bosnia and Herzegovina - Posted
3D modeling in SolidWorks
Part design
Assembly modeling
Export to STEP, STL, and other formats
3D Modeling
3D Logo Design
3D Models of Machine Parts
3D Printing Design
View job
