Remote
Work location
Design a Modular 3D-Printable Vest and Handheld Device for Indoor Arena System Ended
About the job
I’m looking for a reliable CAD designer or mechanical engineer to develop a professional 3D model and assembly for a durable, modular wearable vest and handheld device designed for an indoor interactive game system.
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept references and a base prototype file, then producing a Fusion 360 or SolidWorks master assembly ready for printing and testing.
Key Design Requirements:
Front & back vest shells with curved armor styling
Shoulder pods for lights/sensors (replaceable units)
Front-exit cable port for handheld device (GX12 style connector)
Housing for small electronics (ESP32 board, display, Li-ion battery)
Handheld unit with screen recess, trigger area, and modular grip
All parts printable on a 400 × 400 mm build plate
Tamper-proof screen lens system (clip-in or screw-lock)
Export in STEP + STL with basic render previews
Deliverables:
Complete editable CAD assembly (Fusion 360 / SolidWorks)
STEP + STL exports for printing
3D renders (front, rear, side)
Short print orientation / tolerance notes
Ideal Candidate:
Strong portfolio in product or enclosure design
Experience designing for FDM 3D printing
Familiarity with PETG tolerances and modular assemblies
Good communication and attention to mechanical fit
This is a paid project with milestone-based... read more
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept references and a base prototype file, then producing a Fusion 360 or SolidWorks master assembly ready for printing and testing.
Key Design Requirements:
Front & back vest shells with curved armor styling
Shoulder pods for lights/sensors (replaceable units)
Front-exit cable port for handheld device (GX12 style connector)
Housing for small electronics (ESP32 board, display, Li-ion battery)
Handheld unit with screen recess, trigger area, and modular grip
All parts printable on a 400 × 400 mm build plate
Tamper-proof screen lens system (clip-in or screw-lock)
Export in STEP + STL with basic render previews
Deliverables:
Complete editable CAD assembly (Fusion 360 / SolidWorks)
STEP + STL exports for printing
3D renders (front, rear, side)
Short print orientation / tolerance notes
Ideal Candidate:
Strong portfolio in product or enclosure design
Experience designing for FDM 3D printing
Familiarity with PETG tolerances and modular assemblies
Good communication and attention to mechanical fit
This is a paid project with milestone-based... read more
I’m looking for a reliable CAD designer or mechanical engineer to develop a professional 3D model and assembly for a durable, modular wearable vest and handheld device designed for an indoor interactive game system.
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept references and a base prototype file, then producing a Fusion 360 or SolidWorks master assembly ready for printing and testing.
Key Design Requirements:
Front & back vest shells with curved armor styling
Shoulder pods for lights/sensors (replaceable units)
Front-exit cable port for handheld device (GX12 style connector)
Housing for small electronics (ESP32 board, display, Li-ion battery)
Handheld unit with screen recess, trigger area, and modular grip
All parts printable on a 400 × 400 mm build plate
Tamper-proof screen lens system (clip-in or screw-lock)
Export in STEP + STL with basic render previews
Deliverables:
Complete editable CAD assembly (Fusion 360 / SolidWorks)
STEP + STL exports for printing
3D renders (front, rear, side)
Short print orientation / tolerance notes
Ideal Candidate:
Strong portfolio in product or enclosure design
Experience designing for FDM 3D printing
Familiarity with PETG tolerances and modular assemblies
Good communication and attention to mechanical fit
This is a paid project with milestone-based releases (design → review → revision → final files).
Confidentiality agreement (NDA) required upon acceptance. read less
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept references and a base prototype file, then producing a Fusion 360 or SolidWorks master assembly ready for printing and testing.
Key Design Requirements:
Front & back vest shells with curved armor styling
Shoulder pods for lights/sensors (replaceable units)
Front-exit cable port for handheld device (GX12 style connector)
Housing for small electronics (ESP32 board, display, Li-ion battery)
Handheld unit with screen recess, trigger area, and modular grip
All parts printable on a 400 × 400 mm build plate
Tamper-proof screen lens system (clip-in or screw-lock)
Export in STEP + STL with basic render previews
Deliverables:
Complete editable CAD assembly (Fusion 360 / SolidWorks)
STEP + STL exports for printing
3D renders (front, rear, side)
Short print orientation / tolerance notes
Ideal Candidate:
Strong portfolio in product or enclosure design
Experience designing for FDM 3D printing
Familiarity with PETG tolerances and modular assemblies
Good communication and attention to mechanical fit
This is a paid project with milestone-based releases (design → review → revision → final files).
Confidentiality agreement (NDA) required upon acceptance. read less
I’m looking for a reliable CAD designer or mechanical engineer to develop a professional 3D model and assembly for a durable, modular wearable vest and handheld device designed for an indoor interactive game system.
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept reference... read more
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept reference... read more
I’m looking for a reliable CAD designer or mechanical engineer to develop a professional 3D model and assembly for a durable, modular wearable vest and handheld device designed for an indoor interactive game system.
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept references and a base prototype file, then producing a Fusion 360 or SolidWorks master assembly ready for printing and testing.
Key Design Requirements:
Front & back vest shells with curved armor styling
Shoulder pods for lights/sensors (replaceable units)
Front-exit cable port for handheld device (GX12 style connector)
Housing for small electronics (ESP32 board, display, Li-ion battery)
Handheld unit with screen recess, trigger area, and modular grip
All parts printable on a 400 × 400 mm build plate
Tamper-proof screen lens system (clip-in or screw-lock)
Export in STEP + STL with basic render previews
Deliverables:
Complete editable CAD assembly (Fusion 360 / SolidWorks)
STEP + STL exports for printing
3D renders (front, rear, side)
Short print orientation / tolerance notes
Ideal Candidate:
Strong portfolio in product or enclosure design
Experience designing for FDM 3D printing
Familiarity with PETG tolerances and modular assemblies
Good communication and attention to mechanical fit
This is a paid project with milestone-based releases (design → review → revision → final files).
Confidentiality agreement (NDA) required upon acceptance. read less
The final design must be fully 3D-printable (PETG / carbon-PETG), ergonomic, and service-friendly with replaceable panels and plug-in components.
You’ll be taking concept references and a base prototype file, then producing a Fusion 360 or SolidWorks master assembly ready for printing and testing.
Key Design Requirements:
Front & back vest shells with curved armor styling
Shoulder pods for lights/sensors (replaceable units)
Front-exit cable port for handheld device (GX12 style connector)
Housing for small electronics (ESP32 board, display, Li-ion battery)
Handheld unit with screen recess, trigger area, and modular grip
All parts printable on a 400 × 400 mm build plate
Tamper-proof screen lens system (clip-in or screw-lock)
Export in STEP + STL with basic render previews
Deliverables:
Complete editable CAD assembly (Fusion 360 / SolidWorks)
STEP + STL exports for printing
3D renders (front, rear, side)
Short print orientation / tolerance notes
Ideal Candidate:
Strong portfolio in product or enclosure design
Experience designing for FDM 3D printing
Familiarity with PETG tolerances and modular assemblies
Good communication and attention to mechanical fit
This is a paid project with milestone-based releases (design → review → revision → final files).
Confidentiality agreement (NDA) required upon acceptance. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Part-time
Job type
1-3 months
Job duration
Areas of expertise
3D CAD Design
3D CAD Modeling
3D Rendering
Job categories
3D Design Services
3D Printing Design
3D Product Rendering and Design
About the client
Payment ready
Indonesia (04:28 am)
Posted
Active
Job activity
23 Applicants
6 interviews in progress
Similar jobs
cad design ( 3D SolidWorks or similaire)
Remote - Posted
We need cad designer for making detailed drawing for our steel conveyors, chain conveyors, roller conveyors. gantry robots. We send you the 2D sketch and you make the layout....
3D Design Services
Mechanical CAD Design
Design Engineering Services
Mechanical Design Services
View job
Industrial Design for Technology Product
Remote - Posted
We are looking for an experienced industrial designer to assist in the development of a new technology product related to exoskeletons. The project involves creating innovativ...
Industrial Design Services
3D Product Rendering and Design
3D Modeling
View job
Complete 3d design for home restoration
Remote - Posted
Complete 3d design for home restoration with finer details for electric, ac, kitchen modular, security, furniture, wash room,tv cabinet every finer details
3D Home Rendering
3D Design Services
Architectural Planning and Design
View job
Water distribution design in EPANET
Remote - Posted
A day work for developing EPANET Design for collected coordinates and elevation
1. Full map of all data
2. Zonal map of data
There are 8-9 coordinates collected.
Civil Engineering
3D Modeling
3D Design Services
View job
Telescopic Under-Saddle Bicycle Fender — Mechanical Design for FDM Printing
Remote - Posted
I need a freelance mechanical designer to create a retractable, telescopic rear fender that mounts under a road/gravel bike saddle. The reference style is the "Beatail" fender...
3D Printing Design
3D Modeling
3D Product Modeling
View job
3d modeling
Vadodara, India - Posted
want to build a new 3d design in reference to the existing design model which i have
3D Design Services
3D Models of Machine Parts
3D Modeling
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
192,202
global members
32,695
projects delivered to clients
Trusted by
