Remote
Work location
MBS (Metal Building Software) Edits to a Building Design Ended
About the job
We need updates made to an existing MBS (Metal Building Software) file before the engineer can stamp the building. The engineer has flagged specific changes that must be made:
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the header and use jamb extensions above.
Either solution will work for this project.
Rafter Flange Brace Bolts (Endwall Columns):
Due to significant horizontal wind loads at the top of the endwall columns, the rafter flange brace bolts need to be upgraded.
Change rafter flange brace bolts at the endwall column locations to ½” dia A325 bolts.
At a minimum, this applies to the ones directly above or on either side of the endwall column, but for simplicity, you could update all endwall rafter flange braces to ½” dia A325 bolts.
Deliverables:
Update the MBS file with the above changes.
Return the revised file for engineer approval and stamping.
Urgency:
This needs to be completed ASAP so we can proceed with engineering and permitting.
Attachments:
Current MBS file (will be uploaded after acceptance).
Engineer notes for reference.
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the header and use jamb extensions above.
Either solution will work for this project.
Rafter Flange Brace Bolts (Endwall Columns):
Due to significant horizontal wind loads at the top of the endwall columns, the rafter flange brace bolts need to be upgraded.
Change rafter flange brace bolts at the endwall column locations to ½” dia A325 bolts.
At a minimum, this applies to the ones directly above or on either side of the endwall column, but for simplicity, you could update all endwall rafter flange braces to ½” dia A325 bolts.
Deliverables:
Update the MBS file with the above changes.
Return the revised file for engineer approval and stamping.
Urgency:
This needs to be completed ASAP so we can proceed with engineering and permitting.
Attachments:
Current MBS file (will be uploaded after acceptance).
Engineer notes for reference.
We need updates made to an existing MBS (Metal Building Software) file before the engineer can stamp the building. The engineer has flagged specific changes that must be made:
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the header and use jamb extensions above.
Either solution will work for this project.
Rafter Flange Brace Bolts (Endwall Columns):
Due to significant horizontal wind loads at the top of the endwall columns, the rafter flange brace bolts need to be upgraded.
Change rafter flange brace bolts at the endwall column locations to ½” dia A325 bolts.
At a minimum, this applies to the ones directly above or on either side of the endwall column, but for simplicity, you could update all endwall rafter flange braces to ½” dia A325 bolts.
Deliverables:
Update the MBS file with the above changes.
Return the revised file for engineer approval and stamping.
Urgency:
This needs to be completed ASAP so we can proceed with engineering and permitting.
Attachments:
Current MBS file (will be uploaded after acceptance).
Engineer notes for reference.
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the header and use jamb extensions above.
Either solution will work for this project.
Rafter Flange Brace Bolts (Endwall Columns):
Due to significant horizontal wind loads at the top of the endwall columns, the rafter flange brace bolts need to be upgraded.
Change rafter flange brace bolts at the endwall column locations to ½” dia A325 bolts.
At a minimum, this applies to the ones directly above or on either side of the endwall column, but for simplicity, you could update all endwall rafter flange braces to ½” dia A325 bolts.
Deliverables:
Update the MBS file with the above changes.
Return the revised file for engineer approval and stamping.
Urgency:
This needs to be completed ASAP so we can proceed with engineering and permitting.
Attachments:
Current MBS file (will be uploaded after acceptance).
Engineer notes for reference.
We need updates made to an existing MBS (Metal Building Software) file before the engineer can stamp the building. The engineer has flagged specific changes that must be made:
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the h... read more
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the h... read more
We need updates made to an existing MBS (Metal Building Software) file before the engineer can stamp the building. The engineer has flagged specific changes that must be made:
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the header and use jamb extensions above.
Either solution will work for this project.
Rafter Flange Brace Bolts (Endwall Columns):
Due to significant horizontal wind loads at the top of the endwall columns, the rafter flange brace bolts need to be upgraded.
Change rafter flange brace bolts at the endwall column locations to ½” dia A325 bolts.
At a minimum, this applies to the ones directly above or on either side of the endwall column, but for simplicity, you could update all endwall rafter flange braces to ½” dia A325 bolts.
Deliverables:
Update the MBS file with the above changes.
Return the revised file for engineer approval and stamping.
Urgency:
This needs to be completed ASAP so we can proceed with engineering and permitting.
Attachments:
Current MBS file (will be uploaded after acceptance).
Engineer notes for reference. read less
Overhead Door Change:
There is an overhead door on each sidewall running to the eave strut.
Option A: Add a brace from the eave strut up to the first purlin uphill.
Option B: Stop the jamb at the girt above the header and use jamb extensions above.
Either solution will work for this project.
Rafter Flange Brace Bolts (Endwall Columns):
Due to significant horizontal wind loads at the top of the endwall columns, the rafter flange brace bolts need to be upgraded.
Change rafter flange brace bolts at the endwall column locations to ½” dia A325 bolts.
At a minimum, this applies to the ones directly above or on either side of the endwall column, but for simplicity, you could update all endwall rafter flange braces to ½” dia A325 bolts.
Deliverables:
Update the MBS file with the above changes.
Return the revised file for engineer approval and stamping.
Urgency:
This needs to be completed ASAP so we can proceed with engineering and permitting.
Attachments:
Current MBS file (will be uploaded after acceptance).
Engineer notes for reference. read less
Things to know
Any
Skill Level
$250
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
MBS Building Software
Job categories
2D CAD Design Services
Construction Drawings
About the client
Payment ready
United States (04:06 pm)
Posted
Active
Job activity
15 Applicants
5 interviews in progress
More open jobs from this client (1)
MBS (Metal Building Software) Edits to a Building
Remote - Posted
We need updates made to an existing MBS (Metal Building Software) file before the engineer can stamp the building. The engineer has flagged specific changes that must be made:...
Metal Design and Fabrication
Construction Drawings
Structural Steel Detailing
Structural Design Services
View job
Similar jobs
Draftsman — Construction Drawings | Residential serviced Apartments Interior | AutoCAD
India - Posted
We need a draftsman to support interior construction drawing documentation for a multi-unit luxury residential serviced apartments project. The building has five floor typolog...
2D CAD Design Services
Construction Drawings
Interior Design
AutoCAD Drafting & Design
View job
2D Cad designer required for detailing construction cladding
Bangkok, Thailand - Posted
I'm looking for CAD designers who can work on details for us, please. We would provide everything, examples, etc. It's mainly arrangement and dims/ annotation, etc.
I'm real...
2D CAD Design Services
2D CAD Drafting Services
3D Design Services
View job
Boat design
Remote - Posted
Draftsman has to prepare a drawing with details, which has basic information.
Naval Architecture Design
2D CAD Design Services
3D Design Services
View job
I Studied Civil engineering and also did a course in AutoCAD I have a good Knowledge of AutoCAD
New Delhi, India - Posted
To design a safe,integrated house. you must coordinate these four structural elements. Basements require rigorous waterproofing and lateral soil pressure resistance. columns c...
2D CAD Design Services
AutoCAD Design Services
AutoCAD Drawing Services
Civil Engineering
View job
Sienna Community Hub
Remote - Posted
Project Overview
Looking for an experienced commercial interior designer/architect to create the spatial layout, zoning strategy, and 3D design for Sienna—a premium, warm, an...
2D CAD Design Services
2D to 3D Modeling
3D Architectural Visualization Services
View job
Ongoing custom home construction documents in SoftPlan
Remote - Posted
Hello,
I am looking for drafting support for residential construction documents in SoftPlan and would like to request a fixed fee proposal based on the attached example dra...
Construction Drawings
Architectural Drawing Services
Architectural Drafting Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
201,442
global members
33,232
projects delivered to clients
Trusted by
