Remote
Work location
CAD Redesign & Modification of Vacuum Nozzle in Autodesk Inventor Ended
About the job
Project Overview:
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Maintain a logical, well-named feature tree so future edits are straightforward.
2. Geometry Modifications
Remove all existing protrusions from the current outer profile.
Through-hole: Convert the indicated boss into a clear bore; outer Ø 44 mm, inner Ø 32 mm.
Slot: Add a straight slot 4 mm wide × 100 mm long in the specified location.
Flow-path alignment: Adjust the elongated body-slot so it merges seamlessly into the bottom through-hole, creating one continuous, smooth channel for vacuum suction.
Deliverables:
Fully parameterized Inventor model (.ipt) with clean feature tree
Timeline
Until 29.04.2025
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Maintain a logical, well-named feature tree so future edits are straightforward.
2. Geometry Modifications
Remove all existing protrusions from the current outer profile.
Through-hole: Convert the indicated boss into a clear bore; outer Ø 44 mm, inner Ø 32 mm.
Slot: Add a straight slot 4 mm wide × 100 mm long in the specified location.
Flow-path alignment: Adjust the elongated body-slot so it merges seamlessly into the bottom through-hole, creating one continuous, smooth channel for vacuum suction.
Deliverables:
Fully parameterized Inventor model (.ipt) with clean feature tree
Timeline
Until 29.04.2025
Project Overview:
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Maintain a logical, well-named feature tree so future edits are straightforward.
2. Geometry Modifications
Remove all existing protrusions from the current outer profile.
Through-hole: Convert the indicated boss into a clear bore; outer Ø 44 mm, inner Ø 32 mm.
Slot: Add a straight slot 4 mm wide × 100 mm long in the specified location.
Flow-path alignment: Adjust the elongated body-slot so it merges seamlessly into the bottom through-hole, creating one continuous, smooth channel for vacuum suction.
Deliverables:
Fully parameterized Inventor model (.ipt) with clean feature tree
Timeline
Until 29.04.2025
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Maintain a logical, well-named feature tree so future edits are straightforward.
2. Geometry Modifications
Remove all existing protrusions from the current outer profile.
Through-hole: Convert the indicated boss into a clear bore; outer Ø 44 mm, inner Ø 32 mm.
Slot: Add a straight slot 4 mm wide × 100 mm long in the specified location.
Flow-path alignment: Adjust the elongated body-slot so it merges seamlessly into the bottom through-hole, creating one continuous, smooth channel for vacuum suction.
Deliverables:
Fully parameterized Inventor model (.ipt) with clean feature tree
Timeline
Until 29.04.2025
Project Overview:
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Main... read more
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Main... read more
Project Overview:
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Maintain a logical, well-named feature tree so future edits are straightforward.
2. Geometry Modifications
Remove all existing protrusions from the current outer profile.
Through-hole: Convert the indicated boss into a clear bore; outer Ø 44 mm, inner Ø 32 mm.
Slot: Add a straight slot 4 mm wide × 100 mm long in the specified location.
Flow-path alignment: Adjust the elongated body-slot so it merges seamlessly into the bottom through-hole, creating one continuous, smooth channel for vacuum suction.
Deliverables:
Fully parameterized Inventor model (.ipt) with clean feature tree
Timeline
Until 29.04.2025 read less
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several specific geometry modifications to optimize particle flow.
Scope of Work:
1.Rebuild in Inventor
Reverse-engineer the supplied STL into a native Inventor model using sketches + features (extrude, revolve, shell, etc.).
Maintain a logical, well-named feature tree so future edits are straightforward.
2. Geometry Modifications
Remove all existing protrusions from the current outer profile.
Through-hole: Convert the indicated boss into a clear bore; outer Ø 44 mm, inner Ø 32 mm.
Slot: Add a straight slot 4 mm wide × 100 mm long in the specified location.
Flow-path alignment: Adjust the elongated body-slot so it merges seamlessly into the bottom through-hole, creating one continuous, smooth channel for vacuum suction.
Deliverables:
Fully parameterized Inventor model (.ipt) with clean feature tree
Timeline
Until 29.04.2025 read less
Things to know
Intermediate
Skill Level
$35
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Modeling
3D Modeling
Autodesk Inventor
CAD Services
+1 more
Job categories
3D Modeling
3D Design Services
CAD Drafting Services
CAD Redrafting and Conversion Services
+1 more
About the client
Payment ready
Germany (12:32 am)
Posted
Active
Job activity
8 Applicants
0 interviews in progress
Similar jobs
3D Artist Brief – High Fidelity Upholstery Texturing
Remote - Posted
We are seeking an experienced 3D artist with strong expertise in physically accurate material texturing to assist with the creation of photorealistic upholstery materials for...
3D Modeling
3D Art Design Services
3D Rendering Services
3D Visualizer Services
View job
Furniture CAD & CAM drafting and programming
Remote - Posted
I'm looking for drafting services for custom teak yacht outdoor furniture, solid teak, laminations, custom metwork, etc. This will be ongoing work, as I am a furniture manufac...
3D Modeling
3D Furniture Modeling Services
CNC Programming
Furniture Design and Engineering Services
View job
Lattice Shoe Sole — CAD Design & FEA Analysis Project
India - Posted
We are seeking a skilled CAD engineer / FEA specialist to design and analytically validate a functionally optimized shoe sole using a lattice internal structure (Diamond, cubi...
3D Design Services
View job
SPM Design using UG NX
Chennai, India - Posted
We are looking for a short to medium term support from engineers having SPM design expertise using UG NX. Familiarity with DIN standards will be an additional bonus.
3D Design Services
View job
Title: CAD Designer Needed for Patent-Pending Kitchen Safety Product (Prototype Phase)
Remote - Posted
Description:
I am developing a patent-pending kitchen safety accessory. I currently have a physical prototype and need an experienced CAD designer to create a clean, functi...
3D Modeling
View job
Naval Architect
Remote - Posted
I have an idea for a compact, six-passenger boat and now need an experienced Marine Architect to turn it into a fully engineered, production-ready package built around an alum...
3D Modeling
Yacht & Marine
Marine Engineering Design Services
View job
