Remote
Work location
Switch Matrix Board that maps 4 RF ports to 16 bidirectional RF ports, controlled via an I2C interface Ended
About the job
Product Function
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Minimal additional loss beyond switch matrix.
RF Range: 860–960 MHz, 50Ω stripline waveguides for strong isolation.
Use Environment
Indoor setup, powered by an external 3.3V ESP32-based PoE device.
Requires RF shielding and optimized PCB layout for minimal interference.
Deliverables
Full turnkey solution: design, prototyping, testing, and 20-unit manufacturing.
Includes schematics, layout, BOM, firmware configs, and performance analysis.
Quote to include cost-performance trade-offs for alternative configurations.
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Minimal additional loss beyond switch matrix.
RF Range: 860–960 MHz, 50Ω stripline waveguides for strong isolation.
Use Environment
Indoor setup, powered by an external 3.3V ESP32-based PoE device.
Requires RF shielding and optimized PCB layout for minimal interference.
Deliverables
Full turnkey solution: design, prototyping, testing, and 20-unit manufacturing.
Includes schematics, layout, BOM, firmware configs, and performance analysis.
Quote to include cost-performance trade-offs for alternative configurations.
Product Function
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Minimal additional loss beyond switch matrix.
RF Range: 860–960 MHz, 50Ω stripline waveguides for strong isolation.
Use Environment
Indoor setup, powered by an external 3.3V ESP32-based PoE device.
Requires RF shielding and optimized PCB layout for minimal interference.
Deliverables
Full turnkey solution: design, prototyping, testing, and 20-unit manufacturing.
Includes schematics, layout, BOM, firmware configs, and performance analysis.
Quote to include cost-performance trade-offs for alternative configurations.
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Minimal additional loss beyond switch matrix.
RF Range: 860–960 MHz, 50Ω stripline waveguides for strong isolation.
Use Environment
Indoor setup, powered by an external 3.3V ESP32-based PoE device.
Requires RF shielding and optimized PCB layout for minimal interference.
Deliverables
Full turnkey solution: design, prototyping, testing, and 20-unit manufacturing.
Includes schematics, layout, BOM, firmware configs, and performance analysis.
Quote to include cost-performance trade-offs for alternative configurations.
Product Function
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Min... read more
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Min... read more
Product Function
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Minimal additional loss beyond switch matrix.
RF Range: 860–960 MHz, 50Ω stripline waveguides for strong isolation.
Use Environment
Indoor setup, powered by an external 3.3V ESP32-based PoE device.
Requires RF shielding and optimized PCB layout for minimal interference.
Deliverables
Full turnkey solution: design, prototyping, testing, and 20-unit manufacturing.
Includes schematics, layout, BOM, firmware configs, and performance analysis.
Quote to include cost-performance trade-offs for alternative configurations. read less
Maps 4 (A) RF ports to any of 16 (B) ports, with 1 RX (B → A) and 3 TX (A → B).
Uses 31 SP4T (BGSA14GN10) and 5 high-isolation SP4T (PE424450) in a tree topology.
Controlled via I2C with three 16-bit IO expanders (MCP23017), interfacing with an external ESP32 MCU.
Performance
Isolation: ~100 dB between TX and RX, dual ground planes for RF RX.
Insertion/Return Loss: Minimal additional loss beyond switch matrix.
RF Range: 860–960 MHz, 50Ω stripline waveguides for strong isolation.
Use Environment
Indoor setup, powered by an external 3.3V ESP32-based PoE device.
Requires RF shielding and optimized PCB layout for minimal interference.
Deliverables
Full turnkey solution: design, prototyping, testing, and 20-unit manufacturing.
Includes schematics, layout, BOM, firmware configs, and performance analysis.
Quote to include cost-performance trade-offs for alternative configurations. read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
RF design
Job categories
PCB Design Services
About the client
Payment ready
Israel (07:43 pm)
Posted
Active
Job activity
7 Applicants
0 interviews in progress
6 unanswered invites
Similar jobs
PCP designing
Remote - Posted
Need to design PCP for LED light model... And it customised
PCB Design Services
Electronics Design Service
3D Modeling
View job
PCB Layout Redesign for RK3588 Embedded Board (Siemens PADS)
Remote - Posted
Project Description:
We are looking for an experienced and highly skilled freelance PCB Layout Designer to redesign one of our existing embedded boards. The primary goal of...
PCB Design Services
3D Modeling
3D Design Services
View job
Schematic & PCB Layout Drafter — Cadence Allegro X
Remote - Posted
We need a drafter to help us with the CAD groundwork on our power electronics boards — both schematic capture and PCB layout. Work includes revising our existing drafts and pr...
PCB Design Services
Electronics Design Service
Electronic Enclosures Design
View job
PCB Designer Needed — Automotive GPS/LTE Tracker (ESP32-S3, A7670E, Dual CAN Bus)
Remote - Posted
Commercial Vehicle GPS Tracker PCB Design — Production Ready for JLCPCB
I am developing a commercial vehicle GPS tracking device targeting the fleet management market. I alre...
Electronics Design Service
Electrical Engineering
Product Engineering Services
PCB Design Services
View job
ESP32-S3 Mic Carrier Board
Remote - Posted
# PCB Design Brief — ESP32-S3 Mic Carrier Board
## Overview
Carrier PCB for a distributed microphone array project.
The board accepts two plug-in modules:
1. **YD-ES...
PCB Design Services
3D Product Modeling
Electronic Enclosures Design
View job
Document Existing Arduino Mega Prototype as an EasyEDA Electrical Schematic
Remote - Posted
Project Title:
Document Existing Arduino Mega Prototype as an EasyEDA Electrical Schematic
Project Description:
I am looking for an electronics designer to document my ex...
Electronics Design Service
PCB Design Services
Electrical Schematic Drawing Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
194,635
global members
32,765
projects delivered to clients
Trusted by
