Remote
Work location
Designing comb structure model Ended
About the job
Combs structure is needed to be designed. Combs will be positioned on the back of man's head and on both sides.
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as many the expert lancer deems fit
-1 cm dia , 10 cm from the top of back head to neckline below and Combs Structure is designed in such a way that they comfortably lay on the head scalp when mechanically made to pass through the hairs.
-Combs length is retractable, their teeth also retractable adjusting themselves to the hair size to be retained.
-Designed for easy removal by the outer structure of the machine after use.
Deliverables:
3D CAD model (source file, STL, STEP, or compatible with popular CAD software), exploded view, keyshort animation, bom, clear technical drawings with dimensions and material suggestions( titanium, silicone etc.)
Completion time : 15 days adjustable
Freelancers understanding the project specs and budget may bid otherwise are humbly requested not to waste ur and employer time.
Clear pics will be shared upon understanding the project.
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as many the expert lancer deems fit
-1 cm dia , 10 cm from the top of back head to neckline below and Combs Structure is designed in such a way that they comfortably lay on the head scalp when mechanically made to pass through the hairs.
-Combs length is retractable, their teeth also retractable adjusting themselves to the hair size to be retained.
-Designed for easy removal by the outer structure of the machine after use.
Deliverables:
3D CAD model (source file, STL, STEP, or compatible with popular CAD software), exploded view, keyshort animation, bom, clear technical drawings with dimensions and material suggestions( titanium, silicone etc.)
Completion time : 15 days adjustable
Freelancers understanding the project specs and budget may bid otherwise are humbly requested not to waste ur and employer time.
Clear pics will be shared upon understanding the project.
Combs structure is needed to be designed. Combs will be positioned on the back of man's head and on both sides.
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as many the expert lancer deems fit
-1 cm dia , 10 cm from the top of back head to neckline below and Combs Structure is designed in such a way that they comfortably lay on the head scalp when mechanically made to pass through the hairs.
-Combs length is retractable, their teeth also retractable adjusting themselves to the hair size to be retained.
-Designed for easy removal by the outer structure of the machine after use.
Deliverables:
3D CAD model (source file, STL, STEP, or compatible with popular CAD software), exploded view, keyshort animation, bom, clear technical drawings with dimensions and material suggestions( titanium, silicone etc.)
Completion time : 15 days adjustable
Freelancers understanding the project specs and budget may bid otherwise are humbly requested not to waste ur and employer time.
Clear pics will be shared upon understanding the project.
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as many the expert lancer deems fit
-1 cm dia , 10 cm from the top of back head to neckline below and Combs Structure is designed in such a way that they comfortably lay on the head scalp when mechanically made to pass through the hairs.
-Combs length is retractable, their teeth also retractable adjusting themselves to the hair size to be retained.
-Designed for easy removal by the outer structure of the machine after use.
Deliverables:
3D CAD model (source file, STL, STEP, or compatible with popular CAD software), exploded view, keyshort animation, bom, clear technical drawings with dimensions and material suggestions( titanium, silicone etc.)
Completion time : 15 days adjustable
Freelancers understanding the project specs and budget may bid otherwise are humbly requested not to waste ur and employer time.
Clear pics will be shared upon understanding the project.
Combs structure is needed to be designed. Combs will be positioned on the back of man's head and on both sides.
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as m... read more
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as m... read more
Combs structure is needed to be designed. Combs will be positioned on the back of man's head and on both sides.
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as many the expert lancer deems fit
-1 cm dia , 10 cm from the top of back head to neckline below and Combs Structure is designed in such a way that they comfortably lay on the head scalp when mechanically made to pass through the hairs.
-Combs length is retractable, their teeth also retractable adjusting themselves to the hair size to be retained.
-Designed for easy removal by the outer structure of the machine after use.
Deliverables:
3D CAD model (source file, STL, STEP, or compatible with popular CAD software), exploded view, keyshort animation, bom, clear technical drawings with dimensions and material suggestions( titanium, silicone etc.)
Completion time : 15 days adjustable
Freelancers understanding the project specs and budget may bid otherwise are humbly requested not to waste ur and employer time.
Clear pics will be shared upon understanding the project. read less
Specifications:
-Right side of head 4 numbers or as many the expert lancer deems fit.
-Left side of head 4 numbers or as many the expert lancer deems fit
-1 cm dia, round, 7-8cm long, starting from end of eyebrows to back of ears excluding ear curves
-Back combs 4 numbers as as many the expert lancer deems fit
-1 cm dia , 10 cm from the top of back head to neckline below and Combs Structure is designed in such a way that they comfortably lay on the head scalp when mechanically made to pass through the hairs.
-Combs length is retractable, their teeth also retractable adjusting themselves to the hair size to be retained.
-Designed for easy removal by the outer structure of the machine after use.
Deliverables:
3D CAD model (source file, STL, STEP, or compatible with popular CAD software), exploded view, keyshort animation, bom, clear technical drawings with dimensions and material suggestions( titanium, silicone etc.)
Completion time : 15 days adjustable
Freelancers understanding the project specs and budget may bid otherwise are humbly requested not to waste ur and employer time.
Clear pics will be shared upon understanding the project. read less
Things to know
Any
Skill Level
$35
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Design
3D Modeling
3D Product Design
3D Rendering
3D Technical Drawings
CAD Design Automation
+3 more
Job categories
3D Modeling
Product Engineering Services
Mechanical Design Services
3D Design Services
+1 more
About the client
Payment ready
Pakistan (03:46 am)
Posted
Active
Job activity
8 Applicants
4 interviews in progress
More open jobs from this client (4)
Design 3D CAD Model for Hair-Cutting Combs (Sideburns and Back)
Remote - Posted
I am seeking a freelancer to design three combs for a hair-cutting machine. These combs will guide and manage hair near the ears, sideburns, and back of the head.
Specificati...
3D Modeling
3D Product Modeling
3D Product Rendering and Design
View job
3D Strap Design
Remote - Posted
A 3D Strap model is needed that consists of two Bands of Arch shaped ( each Approx. 18” long light metal/plastic sheet ½ inch wide ). Both around the head. One starting from l...
2D to 3D Modeling
3D Modeling
3D Product Rendering and Design
View job
CAD designer Mechanical Engineer needed to uplift Existing initial 3D Model of consumer product
Remote - Posted
1. Model is intended to be improved bringing modification redesigning in functionality, safety and aesthetic aspects where needed
2. Enabling the model a consumer fit, catchi...
Mechanical Design Services
3D Product Modeling
Rapid Prototyping
2D to 3D Modeling
3D Modeling
View job
Improvise , Redesign 3D Model with functional prototype
Remote - Posted
Title : Improvise , Redesign current 3D Model with functional prototype
1. Model is intended to be improved bringing modification redesigning where necessary in functionalit...
3D Models of Machine Parts
3D Modeling
Engineering Design
3D Product Modeling
Prototype Design Engineering
View job
Similar jobs
Product Design + Prototype: iPhone TPU Case with Real Fabric Hoodie Exterior (Movement)
Remote - Posted
I am developing a fashion-forward iPhone case that combines a protective TPU phone case with a real fabric hoodie exterior.
This is NOT a molded decorative silicone case....
3D Product Modeling
Prototype Design Services
Product Engineering Services
Design for Manufacturability (DFM Services)
View job
Expert in 3D Modeling, CAD Design & 3D Printing Optimization
Remote - Posted
I provide professional 3D modeling services specializing in additive manufacturing (3D printing). My goal is to ensure your ideas are functional, precise, and ready for produc...
3D Models of Machine Parts
3D Printing Design
3D Modeling
3D CAD Translation Services
View job
Mechanical Engineer / 3D CAD Designer for Small Metal Component (Eyewear Product)
Remote - Posted
I am looking for a mechanical or industrial designer with strong 3D CAD experience (SolidWorks, Fusion 360, Inventor or similar) to collaborate on the development of an innova...
3D Product Modeling
Mechanical CAD Design
Mechanical Design Services
3D Modeling
View job
Create a 3D design for a simple piece of gym equipment to be used for a prototype
Remote - Posted
Create a 3D design for a simple piece of gym equipment to be used for a prototype very similar to the attached screenshot
3D Design Services
Prototype Design Services
View job
Refrigeration System
Pune, India - Posted
We need the mechanical design and drawing services (3D and 2D) for the design of the refrigeration system, We will be providing the details of the components that need to be m...
Mechanical Design Services
Design Engineering Services
View job
Freelance 2D & 3D Designer – Automotive Workshop
Shah Alam, Malaysia - Posted
We are looking for an experienced freelance drafter/designer to develop complete 2D technical drawings and 3D rendering for an automotive workshop (BGarage concept).
The pr...
2D CAD Design Services
2D CAD Drafting Services
2D to 3D Modeling
3D Modeling
3D Rendering Services
View job
