Remote
Work location
DESIGN FORKLIFT ROOF PANEL INSTALLATION FRAME Ended
About the job
We require a Forklift Attachment for a 2.5T Forklift to handle 150mm EPS Roof Panels onto top of 3m Buildings during construction. The attached sketches depict what we require. The Frame is to carry up to 6 of 150mm Roof Panels at a max length of 3500mm. The panels will be unloaded from the frame by 2x Workers on Access Platforms that will run alongside the Building. The Access width is 1m per side.
A Concrete Block will be used to Counterweight the panel load.
Construction types we can accept are: Fabricated Steel or Steel Stud Frame. (Bluescope Truecore)
Design is to include a FEA and Report for Certification by Local Engineer. GA and Shop Drawings. PDF and DWG files to be provided. Files must be Autocad Compatible. Drawings must be in English, all Dimmension to be Metric. Ideally the design will satisfy Australian Standards.
Attached is the EPS Roof Panel Data Sheet and Sketches of Concept.
Require design to be completed within 7 Days of Award. Job will be at a Fixed Fee.
A Concrete Block will be used to Counterweight the panel load.
Construction types we can accept are: Fabricated Steel or Steel Stud Frame. (Bluescope Truecore)
Design is to include a FEA and Report for Certification by Local Engineer. GA and Shop Drawings. PDF and DWG files to be provided. Files must be Autocad Compatible. Drawings must be in English, all Dimmension to be Metric. Ideally the design will satisfy Australian Standards.
Attached is the EPS Roof Panel Data Sheet and Sketches of Concept.
Require design to be completed within 7 Days of Award. Job will be at a Fixed Fee.
We require a Forklift Attachment for a 2.5T Forklift to handle 150mm EPS Roof Panels onto top of 3m Buildings during construction. The attached sketches depict what we require. The Frame is to carry up to 6 of 150mm Roof Panels at a max length of 3500mm. The panels will be unloaded from the frame by 2x Workers on Access Platforms that will run alongside the Building. The Access width is 1m per side.
A Concrete Block will be used to Counterweight the panel load.
Construction types we can accept are: Fabricated Steel or Steel Stud Frame. (Bluescope Truecore)
Design is to include a FEA and Report for Certification by Local Engineer. GA and Shop Drawings. PDF and DWG files to be provided. Files must be Autocad Compatible. Drawings must be in English, all Dimmension to be Metric. Ideally the design will satisfy Australian Standards.
Attached is the EPS Roof Panel Data Sheet and Sketches of Concept.
Require design to be completed within 7 Days of Award. Job will be at a Fixed Fee.
A Concrete Block will be used to Counterweight the panel load.
Construction types we can accept are: Fabricated Steel or Steel Stud Frame. (Bluescope Truecore)
Design is to include a FEA and Report for Certification by Local Engineer. GA and Shop Drawings. PDF and DWG files to be provided. Files must be Autocad Compatible. Drawings must be in English, all Dimmension to be Metric. Ideally the design will satisfy Australian Standards.
Attached is the EPS Roof Panel Data Sheet and Sketches of Concept.
Require design to be completed within 7 Days of Award. Job will be at a Fixed Fee.
We require a Forklift Attachment for a 2.5T Forklift to handle 150mm EPS Roof Panels onto top of 3m Buildings during construction. The attached sketches depict what we require. The Frame is to carry up to 6 of 150mm Roof Panels at a max length of 3500mm. The panels will be unloaded from the frame by 2x Workers on Access Platforms that will run alongside the Building. The Access width is 1m per sid...
read more
We require a Forklift Attachment for a 2.5T Forklift to handle 150mm EPS Roof Panels onto top of 3m Buildings during construction. The attached sketches depict what we require. The Frame is to carry up to 6 of 150mm Roof Panels at a max length of 3500mm. The panels will be unloaded from the frame by 2x Workers on Access Platforms that will run alongside the Building. The Access width is 1m per side.
A Concrete Block will be used to Counterweight the panel load.
Construction types we can accept are: Fabricated Steel or Steel Stud Frame. (Bluescope Truecore)
Design is to include a FEA and Report for Certification by Local Engineer. GA and Shop Drawings. PDF and DWG files to be provided. Files must be Autocad Compatible. Drawings must be in English, all Dimmension to be Metric. Ideally the design will satisfy Australian Standards.
Attached is the EPS Roof Panel Data Sheet and Sketches of Concept.
Require design to be completed within 7 Days of Award. Job will be at a Fixed Fee. read less
A Concrete Block will be used to Counterweight the panel load.
Construction types we can accept are: Fabricated Steel or Steel Stud Frame. (Bluescope Truecore)
Design is to include a FEA and Report for Certification by Local Engineer. GA and Shop Drawings. PDF and DWG files to be provided. Files must be Autocad Compatible. Drawings must be in English, all Dimmension to be Metric. Ideally the design will satisfy Australian Standards.
Attached is the EPS Roof Panel Data Sheet and Sketches of Concept.
Require design to be completed within 7 Days of Award. Job will be at a Fixed Fee. read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
Lifting Equipment Engineering
Job categories
Mechanical Engineering
Structural Engineering
FEA Finite Element Analysis
About the client
Payment ready
Australia (07:38 pm)
Posted
Active
Job activity
21 Applicants
4 interviews in progress
More open jobs from this client (6)
CABLE TRUCK TRAY MODIFICATIONS - DESIGN & DETAIL TEAM
Remote - Posted
We have a Cable Truck requiring modifications. Need to turnaround a number of Modification Drawings, Shop Detail, BOM and MTOs in next 7 Days. We seek (1) Agency or Multiple...
2D to 3D Modeling
Design Engineering Services
2D CAD Drafting Services
View job
PDM CONTRACTOR VILLAGE GA DWGs
Remote - Posted
As per attached scope.
- Site Plan
- Floorplans
- Elevations
2x Reviews.
Natives, PDF, DWG files.
Architectural Drawing Services
View job
AUSTRALIAN STANDARDS ARCHITECT - NEW TEMPORARY BUILDINGS
Remote - Posted
Scope of Work
The Architect shall provide architectural and engineering services for the design and certification of transportable buildings constructed using fabricated st...
Architectural Drafting Services
Structural Engineering
Architectural BIM Services
3D Floor Plan Design
3D Floor Plan Rendering
View job
DRAWING MANAGEMENT & WORKFLOW SET-UP FOR NEW COMPANY
Remote - Posted
We are a Construction Company, entering the Transportable Building Market. Our Drawing and Doc Control is adhoc ATM and we seek assistance to establish a Design Management pro...
Design & Drafting
Concept Design
Web Developers Staffing Agency
As-Built Drawings
Manufacturing Drawings
View job
PRE-CAST TRANSPORTABLE BALLAST PANELS
Remote - Posted
Design Pre-Cast Ballast Panel for use in Transportable Buildings. The Panel size must be to sample attached. Require Reo / Reinforcing Detail, BOM and Weights. Design must be...
Civil Engineering
Structural Design Services
AutoCAD Drafting & Design
View job
FABRICATION SHOP DWGS TO AUSTRALIAN STANDARD AS4100
Remote - Posted
I have a simple 310UB Chassis Model (Autocad Inventor) that i require shop detail drawings generated from for fabrication. Drawings to satisfy Australian Standard AS4100. Out...
Steel Shop Drawing Services
View job
Similar jobs
A320 Landing gear simulation (kinematics simulation)
Remote - Posted
Hi, can you do simulation of landing gear A320 using msc adams and its for today.
FEA Finite Element Analysis
Aerospace Engineering
Mechanical Engineering
View job
Civil & Structural Design
Remote - Posted
To analyze the pad and provide rebar details. Also to design & provide structural drawing and calculation for a canopy shed for pad with IPE 200 (or UB 203×133×25) column & ra...
Structural Engineering
Civil Engineering
3D Design Services
View job
Complete Electric Mobile Scaffolding Lift Platform Design (Full Metal Structure + BOM + Calculations) - SolidWorks
Remote - Posted
I need a complete professional design of an electric mobile scaffolding lift platform (the exact type shown in this video):
https://www.youtube.com/shorts/MjghJSu9DXI
(S...
SolidWorks Design Services
Mechanical CAD Design
Design Engineering Services
Mechanical Engineering
Mechanical Design Services
View job
Mechanical Engineer Needed to Design Production-Ready Rotational Molded HVAC Drain Pan
Remote - Posted
I am developing a new HVAC condensate drain pan called DrainForge™ and need a mechanical engineer to transform my concept into a production-ready design suitable for rotationa...
Mechanical Engineering
Product Engineering Services
3D Design Services
View job
nonlinear FEA simulation
Remote - Posted
i need a detailed simulation based on the drawings that are attached
FEA Finite Element Analysis
3D Design Services
3D Modeling
View job
Mechanical Design Engineer ( Freelance )((Automotive/Industrial Products)
Remote - Posted
1. Require a freelance mechanical design engineer for industrial tool development and automotive products.
2. Capability to reverse engineer existing products.
3. Ability...
Mechanical Design Services
Product Engineering Services
Mechanical Engineering
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
200,248
global members
33,179
projects delivered to clients
Trusted by
