United Kingdom
Work location
Mini S278 Design and Application form filling help Ended
About the job
I need a seasoned Civil Engineer for highways, to design a mini S278 plan for a new dropped kerb and a vehicle crossover. I need to someone to also help fill in the mini s278 form as well. The highway authority is Surrey County Council. https://www.surreycc.gov.uk/land-planning-and-development/planning/transport-development/alterations-to-existing-roads
My Local council has approved my architechts plans as per the attached. But Surrey County Council have advised I need a civil engineer for highways to design the same design and make it more technical with utilities etc. As this is not a standard VCO. (Vehicle Crosscover)
The ideal candidate should have extensive experience in road design and improvements, specifically with S278 projects. Please provide examples of similar projects you've completed in your proposal.
Please be aware. I have already had my plans approved by my local council. Which were designed by my architect. So the same design needs to be done again with more technicalities and to the scale as per the guidance pack. Budget is £250 to design and help fill in the whole form. I appreciate a road safety audit maybe required and also utility searches. But the council have said they will confirm this once the initial application has been made.
Ideally I would need someone who is from the U.K. and specialises in Highway design for mini section 278 in the u.k. for vehicle crossover and dropped kerb to a residential property. The candidate must be U.K. re... read more
My Local council has approved my architechts plans as per the attached. But Surrey County Council have advised I need a civil engineer for highways to design the same design and make it more technical with utilities etc. As this is not a standard VCO. (Vehicle Crosscover)
The ideal candidate should have extensive experience in road design and improvements, specifically with S278 projects. Please provide examples of similar projects you've completed in your proposal.
Please be aware. I have already had my plans approved by my local council. Which were designed by my architect. So the same design needs to be done again with more technicalities and to the scale as per the guidance pack. Budget is £250 to design and help fill in the whole form. I appreciate a road safety audit maybe required and also utility searches. But the council have said they will confirm this once the initial application has been made.
Ideally I would need someone who is from the U.K. and specialises in Highway design for mini section 278 in the u.k. for vehicle crossover and dropped kerb to a residential property. The candidate must be U.K. re... read more
I need a seasoned Civil Engineer for highways, to design a mini S278 plan for a new dropped kerb and a vehicle crossover. I need to someone to also help fill in the mini s278 form as well. The highway authority is Surrey County Council. https://www.surreycc.gov.uk/land-planning-and-development/planning/transport-development/alterations-to-existing-roads
My Local council has approved my architechts plans as per the attached. But Surrey County Council have advised I need a civil engineer for highways to design the same design and make it more technical with utilities etc. As this is not a standard VCO. (Vehicle Crosscover)
The ideal candidate should have extensive experience in road design and improvements, specifically with S278 projects. Please provide examples of similar projects you've completed in your proposal.
Please be aware. I have already had my plans approved by my local council. Which were designed by my architect. So the same design needs to be done again with more technicalities and to the scale as per the guidance pack. Budget is £250 to design and help fill in the whole form. I appreciate a road safety audit maybe required and also utility searches. But the council have said they will confirm this once the initial application has been made.
Ideally I would need someone who is from the U.K. and specialises in Highway design for mini section 278 in the u.k. for vehicle crossover and dropped kerb to a residential property. The candidate must be U.K. registered through ICE or Engineering council registered and will be asked to provide full name for me to check credentials on the appropriate website. read less
My Local council has approved my architechts plans as per the attached. But Surrey County Council have advised I need a civil engineer for highways to design the same design and make it more technical with utilities etc. As this is not a standard VCO. (Vehicle Crosscover)
The ideal candidate should have extensive experience in road design and improvements, specifically with S278 projects. Please provide examples of similar projects you've completed in your proposal.
Please be aware. I have already had my plans approved by my local council. Which were designed by my architect. So the same design needs to be done again with more technicalities and to the scale as per the guidance pack. Budget is £250 to design and help fill in the whole form. I appreciate a road safety audit maybe required and also utility searches. But the council have said they will confirm this once the initial application has been made.
Ideally I would need someone who is from the U.K. and specialises in Highway design for mini section 278 in the u.k. for vehicle crossover and dropped kerb to a residential property. The candidate must be U.K. registered through ICE or Engineering council registered and will be asked to provide full name for me to check credentials on the appropriate website. read less
I need a seasoned Civil Engineer for highways, to design a mini S278 plan for a new dropped kerb and a vehicle crossover. I need to someone to also help fill in the mini s278 form as well. The highway authority is Surrey County Council. https://www.surreycc.gov.uk/land-planning-and-development/planning/transport-development/alterations-to-existing-roads
My Local council has approved my archite... read more
My Local council has approved my archite... read more
I need a seasoned Civil Engineer for highways, to design a mini S278 plan for a new dropped kerb and a vehicle crossover. I need to someone to also help fill in the mini s278 form as well. The highway authority is Surrey County Council. https://www.surreycc.gov.uk/land-planning-and-development/planning/transport-development/alterations-to-existing-roads
My Local council has approved my architechts plans as per the attached. But Surrey County Council have advised I need a civil engineer for highways to design the same design and make it more technical with utilities etc. As this is not a standard VCO. (Vehicle Crosscover)
The ideal candidate should have extensive experience in road design and improvements, specifically with S278 projects. Please provide examples of similar projects you've completed in your proposal.
Please be aware. I have already had my plans approved by my local council. Which were designed by my architect. So the same design needs to be done again with more technicalities and to the scale as per the guidance pack. Budget is £250 to design and help fill in the whole form. I appreciate a road safety audit maybe required and also utility searches. But the council have said they will confirm this once the initial application has been made.
Ideally I would need someone who is from the U.K. and specialises in Highway design for mini section 278 in the u.k. for vehicle crossover and dropped kerb to a residential property. The candidate must be U.K. registered through ICE or Engineering council registered and will be asked to provide full name for me to check credentials on the appropriate website. read less
My Local council has approved my architechts plans as per the attached. But Surrey County Council have advised I need a civil engineer for highways to design the same design and make it more technical with utilities etc. As this is not a standard VCO. (Vehicle Crosscover)
The ideal candidate should have extensive experience in road design and improvements, specifically with S278 projects. Please provide examples of similar projects you've completed in your proposal.
Please be aware. I have already had my plans approved by my local council. Which were designed by my architect. So the same design needs to be done again with more technicalities and to the scale as per the guidance pack. Budget is £250 to design and help fill in the whole form. I appreciate a road safety audit maybe required and also utility searches. But the council have said they will confirm this once the initial application has been made.
Ideally I would need someone who is from the U.K. and specialises in Highway design for mini section 278 in the u.k. for vehicle crossover and dropped kerb to a residential property. The candidate must be U.K. registered through ICE or Engineering council registered and will be asked to provide full name for me to check credentials on the appropriate website. read less
Things to know
Expert
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
CAD Design
Civil Design
Civil Engineering
Highway Design
Highway Engineering
Road Design
utility design
+4 more
Job categories
2D CAD Design Services
ArchiCAD Design Services
CAD Drawing Services
Design & Drafting
CAD Drafting Services
Custom Miniatures
Design Engineering Services
Prototype Design Services
+5 more
About the client
Payment not ready
United Kingdom (04:28 pm)
Posted
Active
Job activity
0 Applicants
0 interviews in progress
5 unanswered invites
Similar jobs
Ongoing On-demand 2d Floorplan & 3D rendering gig
Remote - Posted
Ongoing freelance Planner 5D modeller for outdoor-living showrooms
We are looking for a reliable freelance modeller we can turn to whenever we assess a new showroom space....
2D CAD Design Services
3D Rendering Services
Architectural Drawing Services
View job
Tile Project Design for Artist
Remote - Posted
Hi there,
We are in search of a designer who can help us develop a custom piece based on the references provided, while incorporating our branding into the overall design....
2D CAD Design Services
3D CAD Translation Services
3D Design Services
View job
CALIFORNIA - LOS ANGELES - Residential Drafter CAD
Remote - Posted
I need someone who is familiar with CBC and has experience with projects in LA
Mostly to finish drawings and make corrections per city requirements.
Work on AutoCad
AutoCAD Drafting & Design
New Residential Design
Architectural Drafting Services
CAD Drafting Services
Drafting and Design Services
View job
CAD Mechanical Drafter — Custom Water Treatment Equipment
Remote - Posted
We design and build custom water treatment systems — RO skids, control panels, EDI systems, pump skids — from our shop in Venice, Florida.
Our lead engineer defines what ge...
Design & Drafting
CAD Drafting Services
3D Design Services
View job
Dispositivo medico de cierre venoso tipo cerclaje / “Medical device for venous closure using a cerclage-type mechanism.”
Remote - Posted
Hola, busco un ingeniero mecánico o biomédico con experiencia en mecanismos miniaturizados y desarrollo de dispositivos médicos.
Necesito resolver un mecanismo de pequeño diá...
Medical Devices Design
Design Engineering Services
Mechanical Engineering
Prototype Design Services
View job
Wardrobe design development using Autodesk Inventor
Remote - Posted
We need a part-time furniture designer to assist with detailed drawings and 3D renderings for our company furniture. The drawings shall be in Autodesk Inventor format. It is e...
Furniture Design
Design Engineering Services
3D Design Services
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
213,769
global members
33,459
projects delivered to clients
Trusted by
