Remote
Work location
Functional Miniature Suitcase CAD Design for 3D Printing and Injection Moulding Anyone
About the job
Hello,
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), including the folded handle and wheels. Please inform me before beginning if these dimensions create any significant technical issues.
The suitcase should:
• Open and close.
• Have a permanently attached moving handle.
• Have permanently retained, non-rotating wheels with a subtle flat contact surface, allowing it to stand securely without rolling.
• Have an empty lower compartment.
• Contain no customer-removable components.
The inside of the lid should include a blank recessed area for a separately printed artwork insert. The artwork will be supplied later and permanently bonded during assembly; the artwork itself is not part of the CAD geometry .
The exterior should retain the blank rectangular nameplate area and circular emblem area shown in the reference image.
The corner-guard forms should be integrated into the shell rather than designed as separate or loose components.
The first version will be 3D printed as a functional prototype, but the design should also be suitable for future production in injection-moulded ABS. Please recommend the most appropriate hinge,... read more
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), including the folded handle and wheels. Please inform me before beginning if these dimensions create any significant technical issues.
The suitcase should:
• Open and close.
• Have a permanently attached moving handle.
• Have permanently retained, non-rotating wheels with a subtle flat contact surface, allowing it to stand securely without rolling.
• Have an empty lower compartment.
• Contain no customer-removable components.
The inside of the lid should include a blank recessed area for a separately printed artwork insert. The artwork will be supplied later and permanently bonded during assembly; the artwork itself is not part of the CAD geometry .
The exterior should retain the blank rectangular nameplate area and circular emblem area shown in the reference image.
The corner-guard forms should be integrated into the shell rather than designed as separate or loose components.
The first version will be 3D printed as a functional prototype, but the design should also be suitable for future production in injection-moulded ABS. Please recommend the most appropriate hinge,... read more
Hello,
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), including the folded handle and wheels. Please inform me before beginning if these dimensions create any significant technical issues.
The suitcase should:
• Open and close.
• Have a permanently attached moving handle.
• Have permanently retained, non-rotating wheels with a subtle flat contact surface, allowing it to stand securely without rolling.
• Have an empty lower compartment.
• Contain no customer-removable components.
The inside of the lid should include a blank recessed area for a separately printed artwork insert. The artwork will be supplied later and permanently bonded during assembly; the artwork itself is not part of the CAD geometry .
The exterior should retain the blank rectangular nameplate area and circular emblem area shown in the reference image.
The corner-guard forms should be integrated into the shell rather than designed as separate or loose components.
The first version will be 3D printed as a functional prototype, but the design should also be suitable for future production in injection-moulded ABS. Please recommend the most appropriate hinge, closing mechanism, tolerances, wall thicknesses, and component construction.
I require the following deliverables:
• Editable native CAD files
• Individual component STEP files
• Complete assembled STEP file
• Print-ready STL and/or 3MF files
• Exploded assembly view optional
• Full commercial rights to the design
• One CAD revision after I test the first physical prototype
This request is for CAD design only. The prototype will be manufactured separately.
Please send me a fixed-price quotation, estimated completion time, if you have designed examples of similar miniature products.
Thank you. read less
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), including the folded handle and wheels. Please inform me before beginning if these dimensions create any significant technical issues.
The suitcase should:
• Open and close.
• Have a permanently attached moving handle.
• Have permanently retained, non-rotating wheels with a subtle flat contact surface, allowing it to stand securely without rolling.
• Have an empty lower compartment.
• Contain no customer-removable components.
The inside of the lid should include a blank recessed area for a separately printed artwork insert. The artwork will be supplied later and permanently bonded during assembly; the artwork itself is not part of the CAD geometry .
The exterior should retain the blank rectangular nameplate area and circular emblem area shown in the reference image.
The corner-guard forms should be integrated into the shell rather than designed as separate or loose components.
The first version will be 3D printed as a functional prototype, but the design should also be suitable for future production in injection-moulded ABS. Please recommend the most appropriate hinge, closing mechanism, tolerances, wall thicknesses, and component construction.
I require the following deliverables:
• Editable native CAD files
• Individual component STEP files
• Complete assembled STEP file
• Print-ready STL and/or 3MF files
• Exploded assembly view optional
• Full commercial rights to the design
• One CAD revision after I test the first physical prototype
This request is for CAD design only. The prototype will be manufactured separately.
Please send me a fixed-price quotation, estimated completion time, if you have designed examples of similar miniature products.
Thank you. read less
Hello,
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), inclu... read more
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), inclu... read more
Hello,
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), including the folded handle and wheels. Please inform me before beginning if these dimensions create any significant technical issues.
The suitcase should:
• Open and close.
• Have a permanently attached moving handle.
• Have permanently retained, non-rotating wheels with a subtle flat contact surface, allowing it to stand securely without rolling.
• Have an empty lower compartment.
• Contain no customer-removable components.
The inside of the lid should include a blank recessed area for a separately printed artwork insert. The artwork will be supplied later and permanently bonded during assembly; the artwork itself is not part of the CAD geometry .
The exterior should retain the blank rectangular nameplate area and circular emblem area shown in the reference image.
The corner-guard forms should be integrated into the shell rather than designed as separate or loose components.
The first version will be 3D printed as a functional prototype, but the design should also be suitable for future production in injection-moulded ABS. Please recommend the most appropriate hinge, closing mechanism, tolerances, wall thicknesses, and component construction.
I require the following deliverables:
• Editable native CAD files
• Individual component STEP files
• Complete assembled STEP file
• Print-ready STL and/or 3MF files
• Exploded assembly view optional
• Full commercial rights to the design
• One CAD revision after I test the first physical prototype
This request is for CAD design only. The prototype will be manufactured separately.
Please send me a fixed-price quotation, estimated completion time, if you have designed examples of similar miniature products.
Thank you. read less
I want to create a functional miniature suitcase based on the attached reference image. The image shows the intended appearance and layout but should be treated as a visual reference only. The construction and small details should be simplified and engineered appropriately for the miniature scale.
The target overall closed dimensions are 90 × 65 × 33 mm (height × width × depth), including the folded handle and wheels. Please inform me before beginning if these dimensions create any significant technical issues.
The suitcase should:
• Open and close.
• Have a permanently attached moving handle.
• Have permanently retained, non-rotating wheels with a subtle flat contact surface, allowing it to stand securely without rolling.
• Have an empty lower compartment.
• Contain no customer-removable components.
The inside of the lid should include a blank recessed area for a separately printed artwork insert. The artwork will be supplied later and permanently bonded during assembly; the artwork itself is not part of the CAD geometry .
The exterior should retain the blank rectangular nameplate area and circular emblem area shown in the reference image.
The corner-guard forms should be integrated into the shell rather than designed as separate or loose components.
The first version will be 3D printed as a functional prototype, but the design should also be suitable for future production in injection-moulded ABS. Please recommend the most appropriate hinge, closing mechanism, tolerances, wall thicknesses, and component construction.
I require the following deliverables:
• Editable native CAD files
• Individual component STEP files
• Complete assembled STEP file
• Print-ready STL and/or 3MF files
• Exploded assembly view optional
• Full commercial rights to the design
• One CAD revision after I test the first physical prototype
This request is for CAD design only. The prototype will be manufactured separately.
Please send me a fixed-price quotation, estimated completion time, if you have designed examples of similar miniature products.
Thank you. read less
Things to know
Intermediate
Skill Level
Open budget
Fixed-rate
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
3D CAD Modeling
3D Modeling
3D Printing Design
Assembly Modeling
Assembly Modeling Services
Autodesk Fusion 360
Autodesk Inventor
Design for Assembly
Design for Manufacturing (DFM
Injection Molding
Manufacturing Drawings
Mechanical Design
Product Design
Prototype Design Engineering
Solidworks
+12 more
Job categories
Industrial Design Services
Mechanical Design Services
Injection Molding Design
3D Modeling
3D Printing Design
+2 more
About the client
Payment ready
Greece (04:46 pm)
Posted
Active
Job activity
61 Applicants
0 interviews in progress
Similar jobs
Premium Luxury Solar Carport Design
Remote - Posted
We are looking for a creative and experienced designer to develop a unique, modern, and luxurious solar carport with a minimalist architectural style.
The design should fea...
3D Architectural Visualization Services
Architectural Planning and Design
Industrial Design Services
3D Design Services
3D Architectural Rendering Services
View job
3D Modeling of Moni Upholstered Armchair
Remote - Posted
I am looking for an experienced 3D modeler to create a high-quality and accurate 3D model of an upholstered armchair, starting from an existing 3D model of the wooden frame an...
3D Modeling
3D Design Services
3D Furniture Modeling Services
3D Product Modeling
View job
holiday village
Remote - Posted
I have a point cloud in RPC format and am looking for help with creating CAD drawings.
The building has two floors.
I need the floor plans for floor 1 and 2, and the roof....
Architectural Planning and Design
3D Design Services
3D Modeling
View job
Arabic ring design
Remote - Posted
i have ring with STL file 70% completed need to edit
3D Printing Design
3D Modeling
3D Design Services
View job
Mechanical Design Engineer Needed – Plastic Extrusion & Product Development (Confidential Project)
Remote - Posted
Project Type: Mechanical Engineering / CAD Design / Design for Manufacturing (DFM)
Location: Remote – U.S. preferred
Project Overview
We are a U.S.-based startup deve...
Industrial Design Services
Product Engineering Services
Mechanical Design Services
Machine Design
Design Engineering Services
View job
CAD Designer Needed for Small Metal Wearable Product – 3D Modeling & Prototyping
Remote - Posted
Project Overview
I am an independent inventor seeking an experienced CAD designer or mechanical design engineer to assist with developing a small, wearable metal product....
3D Product Modeling
Mechanical Design Services
Wearables Design
View job
How it works
Find hourly jobs
Top rated experts are regularly hired for hourly jobs & ongoing client work.
Fixed-rate jobs
Experts can browse & apply to fixed-rate work & quote on a flat-rate basis.
Design contests
Experts build a reputation and earn prizes by participating in design challenges.
About Cad Crowd
4.9/5.0
(Our client satisfaction)
G2 2022
Spring high performer
220,122
global members
33,595
projects delivered to clients
Trusted by
