Hire the best solidworks edrawing experts for your company

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off... Read more

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off racecars and custom engineered cars. I've designed parts to be made using every manufacturing method, sheetmetal, 2d and 3d subractive, additive (SLA,FDM,SLS, etc.) and will make the necessary DFM decisions based on your needs. Every part i make will be 100% analysed for it's design specifications (FEA, CFD, etc) , with function and form developed for it's use case.

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photosh... Read more

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photoshop PROJECTS Projects Handled in Hindustan Aeronautics Limited: “Design and Process Optimization of Tail Rotor Drive Shaft Assembly of Advance Light Helicopter (ALH) Transmission System”. Design and development of an American Chopper using SolidWorks, Skill Lync  Developed a professional mood board, ideation sketches and detailed presentation sketches of a American Chopper in Adobe Photoshop  Designed and assembled 13 sub-components such as Chain, Engine sub-assembly, Front & rear wheels, Chassis, Suspension fork, Gas tank, etc. in SolidWorks Pro  Rendered the fully assembled American Chopper withadded Environment, added decals, scenes and materials using PhotoView 360 & SolidWorks Visualize. Design of Sun seeker Predator Yacht, Skill Lync.  Setup the blueprint according to the predefined dimension.  Designed and assembled the yatch of various portions – Hull, Front seat, Garage door, Middle seat, Superstructure, Propeller, Radar mast in SolidWorks Pro  Used Photo View 360 & SolidWorks Visualize, rendered theyatch by apply colour, Materials, and entire value like gamma value & reflection, added camera spot light to view part realistic. Design of Inner and Outer panel of Hood using NX CAD, Skill Lync.  Designed the Hood inner panel as per EURONCAP regulation and considered pedestrian safety and passenger safety standards when frontal crash occur.  Provided Emboss to improve stiffnessand allow to force dissipated toward the side outward for the driver and frontal passenger safety.  Developed the necessary reinforcement and provided latch and striker, mastic data to avoid noise. Design of Backdoor, Skill Lync.  Designed the backdoor by two portion of inner and outer panel using NX CAD and Catia V5.  Designed the back door inner panel with outward stress flow by creating emboss and provided hemming to join inner and outer panel.  Developed the necessary reinforcement for gas stay, hinges, wiper motor and provided latch and striker. Design of Car Front Fender with wheel arc calculation, Skill Lync.  Designed front fender based on the design data with following portion such as drip area, Bumper mount area, Sill area, cowl and A-pillar region using NX CAD.  Ensured the drip area designed as per standard dimensions which is fitted inside the Engine compartment acts as major mounting region of fender.  Calculated the wheel arc clearance after design and ensured the design result matches the standard regulation criteria. Design of Car Roof using NX CAD, Skill Lync.  Calculated the bow roof position by studying the roof curvature dimension for heat distortion criteria and snowed criteria.  Ensured the heat distortion test and snowed test result passes as per standard.  Designed the front roof rail, rear roof rail, centre roof rail & centre bow roof rail, and with necessary reinforcement. Design of Casing and Box assembly, Skill Lync.  Designed the Enclosure, Metal Bracket, flattening and forming the sheet using NX CAD.  Used different method to design flange, bead, cut out and convert wizard from solid to sheet metal.  Used unbend and rebend to check whether the sheet metal generated properly. Value Engineering in Air tank and Distributed Drying Unit mounting System, Ashok Leyland Ltd, Chennai (2013)  Developed and modified of air tank and Dryer and Distribution Unit mounting system in Heavy Duty vehicles to full fill the pneumatic pressure properly.  After the modification, pressure reduction in Air tank and Dryer and Distribution Unit were reduced. Also the mounting stress can be analysed using Ansys and Solid works in the mounting bracket of Air tank and DDU System.

- Deep fundamental knowledge in Math, Physics, Mechanics - Senior student in University of Michigan - Shanghai Jiao Tong University Joint Institute Read more

- Deep fundamental knowledge in Math, Physics, Mechanics - Senior student in University of Michigan - Shanghai Jiao Tong University Joint Institute

I can provide: -3D CAD model of your parts(design and edit existing model) -Assemble all of parts -Mechanical construction and technical drawing -Necessary set of drawings in PDF, DXF(for CNC cutting)... Read more

I can provide: -3D CAD model of your parts(design and edit existing model) -Assemble all of parts -Mechanical construction and technical drawing -Necessary set of drawings in PDF, DXF(for CNC cutting) , dwg and 3D format STEP/IGES(suitable for molding),STL(suitable for 3D printing),... -Create animation from Solidworks CAD(animation of assembling part, movement of movable component,...) -Infinite modifications and continue supporting even after the end of the project time I am a CAD designer with master degree in mechanical engineering (EXPERT IN SOLIDWORKS) we will guarantee the quality of our work (100%) and If you are not satisfied with the results after the end, there is no need to pay! we can do the best high quality job with best price but some field is not our expertise so We are interested to hear more about the project to discuss this further and if you find us as a best choice for this job we can start the project as soon as possible best regards

I'm a Mechanical Engineer with more than 7 years experience in SOLIDWORKS Testing, Engineering, Design, Product Development, Industrial Automation and Manufacturing process. I'm a good innovator and... Read more

I'm a Mechanical Engineer with more than 7 years experience in SOLIDWORKS Testing, Engineering, Design, Product Development, Industrial Automation and Manufacturing process. I'm a good innovator and professional Engineer.

3d Molder and Cad Drafter with efficient approach to client service. Hands-on and detail-oriented whether working independently or as a part of a team. * In-good knowledge of Autodesk AutoCAD, Desu... Read more

3d Molder and Cad Drafter with efficient approach to client service. Hands-on and detail-oriented whether working independently or as a part of a team. * In-good knowledge of Autodesk AutoCAD, Desualt SolidWorks and other designing applications Communicate and coordinate effectively with clients and colleagues * Communicate with the engineering and research team to understand technical specifications of the product. * Well Versed in Computer knowledge both Hardware & Software. * Design 2D and 3D Models and ensure that they are identical to sketches provided by the Clients then execute all process. * Perform the designing modifications in the products of several clients if needed. * Test sample products to ensure that designs are convenient and easy to use by the end user. * Planning and monitoring the project with the involvement of team members. * Maintaining the project on track and keeping up to date with required reports. * Managing the production and progress of project deliverables.

I have 10 years experience in a sheet metal and machine shop engineering environment. In those 10 years, I have honed my skills in Solidworks and cad creation from both a technical and manufacturin... Read more

I have 10 years experience in a sheet metal and machine shop engineering environment. In those 10 years, I have honed my skills in Solidworks and cad creation from both a technical and manufacturing production perspective. Creating 3D models, drafting blue prints and deriving functional flat patterns for use in production are daily tasks. I also regularly consult customers with concerns or recommendations which would improve their design cost-wise during manufacturing. I pride myself on my efficiency, creativity and attention to detail. A project example which I view as an accomplishment: I redesigned a long time job to meet evolving customer quality expectations while reducing engineering and planning costs. Using Solidworks, I created 3d models for the complex job's assemblies using dozens of configurations which were easily editable for both revision changes and use in similar jobs. This change reduced planning, drawing, drafting, and programming time by over 75% and greatly reduced the chance of error.

Am very skill and efficient in 100% Solidworks design, 60% in autocad design, 50% in matlab and 100% preparing proposals for projects using Microsoft word packages with a 5 years experience (since 201... Read more

Am very skill and efficient in 100% Solidworks design, 60% in autocad design, 50% in matlab and 100% preparing proposals for projects using Microsoft word packages with a 5 years experience (since 2018)

I am a mechanical engineering student. I have a good solidworks education. As an additional job, I do solidworks drawings. Read more

I am a mechanical engineering student. I have a good solidworks education. As an additional job, I do solidworks drawings.

I am Mechanical Design Engineer with 4 year industrial experience and provide these services listed below .............................................................. Mechanical Design and 3D Mode... Read more

I am Mechanical Design Engineer with 4 year industrial experience and provide these services listed below .............................................................. Mechanical Design and 3D Modeling of Product 3D Mechanical Design Modeling from Image, Concept, Drawings or any other source Reverse Engineering of Products Motion Analysis of Mechanical Design 3D Modeling for 3D Printing Mechanical Designing and Modeling of industrial Parts and Assemblies Modification in Existing 3D Model. 3D Modeling for Manufacturing .................................................................... 2D Drawings for Manufacturing Engineering Drawings Drawings from concept designs Surface Modeling 3D Rendering of Product High-Quality Photo realistic Rendering Best Presentation of Product with 3D Animation 3D animation in Solidworks Concept designs and Prototyping Product User Manual Creation Report Generation for your Product Sheet Metal Work Plastic Cases ............................................................... Deliverable files will be STL, For 3d printing. DXF, For CNC Laser Cutting STEP, 3D Model OBJ, 3D Model FBX, 3D Model DWG, Drawing PDF, Drawing PDF, 3D Model EDRW, eDrawing IGES, 3D Model SLDPRT, Part File SolidWorks SLDASM, Assembly File SolidWorks JPG PNG ............................................................................................................. I have bachelor degree in Mechanical Engineering and I'm also member of Pakistan Engineering Council. My key competencies include taking products from initial concept or sketch through 3D CAD design and concept validation to full scale manufacture, for complete Product development. I do take confidentiality seriously and am happy to Sign the NDA in order to review your project with confidence. I specialize in 3d modeling, 3d designing, CAD, stl files for 3d printing, dxf files for laser cutting, rendering and animation of a product.

I am a Mechanical Engineer who specialists particularly in Solidworks ,Autocad ,3D CAD modelling and pretty much everything that has something to do with design.... -2D image to 3D Model CAD design... Read more

I am a Mechanical Engineer who specialists particularly in Solidworks ,Autocad ,3D CAD modelling and pretty much everything that has something to do with design.... -2D image to 3D Model CAD design -I have over 2 years of Autocad & Solidworks experience. - 2D drawings, 3D models (parts and assemblies), Assemblies Animation, for industrial subjects. CAD skills: -Auto cad 3d - Solidworks - Auto-cad - Power-shape -EDrawing

HELLO EVERYONE I WAS ALWAYS CURIOUS LIKE FROM WHERE THE PROCESS GETS START FOR ANY PARTICULAR PRODUCT SO THIS THOUGHT TOOK TO THE DESIGN FIELD. SO I AM VERY MUCH ENJOYING THE DESIGN FIELD. CURRENTLY... Read more

HELLO EVERYONE I WAS ALWAYS CURIOUS LIKE FROM WHERE THE PROCESS GETS START FOR ANY PARTICULAR PRODUCT SO THIS THOUGHT TOOK TO THE DESIGN FIELD. SO I AM VERY MUCH ENJOYING THE DESIGN FIELD. CURRENTLY WORKING ON SOLIDWORK .

Bachelor degree in mechanical engineering Read more

Bachelor degree in mechanical engineering

Designing complex assemblies for manufacture. Previously designed automotive suspension systems, bulk storage solutions and food processing equipment. Read more

Designing complex assemblies for manufacture. Previously designed automotive suspension systems, bulk storage solutions and food processing equipment.

I have completed several design projects for toys and watches. My main skill lies in translating an idea from an initial concept, sketch or design and to come with a sound mechanical construction with... Read more

I have completed several design projects for toys and watches. My main skill lies in translating an idea from an initial concept, sketch or design and to come with a sound mechanical construction with a completed 3D assembly where all the component parts are manufacturable. Coming from a strong mechanical engineering, manufacturing background, I have many years of hands on experience, and have made many improvements for products already in manufacture. Proof of concept prototyping with 3D printing (FDM or SLA) or CNC machining is available to produce a functional prototype based on the 3D model assembly. This is necessary before going for a production run. I am close to the manufacturing bases in South China, and have a network of factories who can do small batch production runs. Summary of other activities: • Design & proof of concept prototypes of small mechanical devices and producing a set of 3D assembly models and 2D drawings to output to CNC, 3D printing and manufacture • Engineering drawings approvals new & for ongoing production to ensure finished product matches all specifications and requirements • Project management of existing production • Product audit for various consumer products (various consumer products) • Sourcing of various products & components • Sourcing of alternative supplier base for lower unit cost and improved quality with follow up factory audit • Factory QC and making necessary changes to production and future design and product development

I have been doing CAD Modelling for the past 3 years and am continuing the same. I am interested in taking up a variety of projects in a diverse array of fields. I am very keen and share a special int... Read more

I have been doing CAD Modelling for the past 3 years and am continuing the same. I am interested in taking up a variety of projects in a diverse array of fields. I am very keen and share a special interest in the automotive sector, both as a designer and an Engineer. I use Solidworks as a Design tool, both for part modelling and Drawings generation. I use Ansys as a tool for simulation.

I am well versed with solid works 21, I work as a cad designer for a fabrication company based in Chester Wv. Read more

I am well versed with solid works 21, I work as a cad designer for a fabrication company based in Chester Wv.

I am Chamara. as an accomplished Mechanical Engineer with 07 years post qualification experience in a cross industry setting, I thrive to be successful on problem solving relating to highly technical... Read more

I am Chamara. as an accomplished Mechanical Engineer with 07 years post qualification experience in a cross industry setting, I thrive to be successful on problem solving relating to highly technical product design and development, with especial skill at product innovations backed by 3D modelling and inventions aimed at solving the core problems on a diverse clientele. Hence, I focus most of my working time on Conceptualization, Mechanical R&D procedures, Concept planning and testing, Prototyping with the ultimate goal of innovative product development.

Mechanical engineer with an industry experience 3years in the medical device and automobile field. I'm new in the freelancer stream but have the credibility to complete the projects with great quality... Read more

Mechanical engineer with an industry experience 3years in the medical device and automobile field. I'm new in the freelancer stream but have the credibility to complete the projects with great quality and outstanding on-time delivery. *3 Years of experience with Solidworks. *Working in an MNC as a design engineer from the past 3 years. *Design and development of industrial and consumer products. *Design verification and validation. *Currently working in a startup that has a very high chance of success.

I am great at multi-tasking, critical thinking, working in a team environment or alone. I've re-designed parts for PT, company I work full-time for, cam and groove quick connect/disconnect fittings. I... Read more

I am great at multi-tasking, critical thinking, working in a team environment or alone. I've re-designed parts for PT, company I work full-time for, cam and groove quick connect/disconnect fittings. I've also reverse engineered parts for machines for our Punch-Lok facility, as well as make 3D models for the parts, gradually going from 2D AutoCAD drawings to 3D models or assemblies and drawings in Solidworks 2020.